Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Wheel Directory: Racing Hart CP-035R 16x7.0 +45 (https://www.ft86club.com/forums/showthread.php?t=62734)

Wayno 04-07-2014 10:31 PM
Wheel Directory: Racing Hart CP-035R 16x7.0 +45
 
11 Attachment(s)
Racing Hart
CP-035R
16x7"
+45 ET
5.0Kg/11lbs
Forged

Alignment on coilovers:
FC: -3*, FT: -0mm
RC: -1.5*, RT: +1mm


Alignment on stock:
FC: -2.4*, FT: -0mm
RC: -1.0*, RT: +1mm

3mm clearance from tire to stock front spring perch.


Fitted with Bridgestone RE002 225/50R16 (10.5Kg)

For comparison:
OEM Enkei 16x6.5" - 7.2kg
OEM Yokohama DB70 205/55R16 - 9kg.

I don't even rate the OEM 17" Subaru wheels, they're an abomination.
OEM Subaru 17x7.0" - 9.4kg
OEM Michelin 215/45R17 - 9kg

GuerillaRacing 04-09-2014 05:30 PM
Very nice 86, is this with any spacers in the rear?

myEFispissed 04-09-2014 06:37 PM
Where did you find these Wayno? I have some 15s on my EF civic.

BRZZZZZZZZZZ 04-09-2014 06:43 PM
Nice! Tires look meaty for the 7" wide wheels, I think I actually like those more than my TE37s.

Wayno 04-09-2014 10:48 PM
Quote:
Originally Posted by GuerillaRacing (Post 1660883)
Very nice 86, is this with any spacers in the rear?
Spacers are illegal in Australia mate.

GuerillaRacing 04-10-2014 12:17 PM
Doh!

DarrenDriven 05-14-2014 04:44 PM
http://www.darrendriven.com/ft86/title.png

Stumpygt86 08-30-2014 09:35 PM
Quote:
Originally Posted by Wayno (Post 1656005)
Racing Hart
CP-035R
16x7"
+45 ET
5.0Kg/11lbs

Fitted with Bridgestone RE002 225/50R16 (10.5Kg)

For comparison:
OEM Enkei 16x6.5" - 7.2kg
OEM Yokohama DB70 205/55R16 - 9kg.

I don't even rate the OEM 17" Subaru wheels, they're an abomination.
Hey Wayno, where did you find those wheels? I am currently in the market for either 16x7 or 16x7.5 CP-035R's.

Most I have seen so far are either a 4 stud or a 5x114.

Cheers,
Jeff

Wayno 08-30-2014 10:01 PM
Second hand, extremely rare like ssr type c. You'll have much more choice with TE37.

Wayno 10-03-2014 03:40 AM
Now running about 2.4 deg camber in the front with 3 mm clearance tire to stock spring seat.

Timmy_Jones 10-03-2014 10:16 AM
Mini - almost RPF1s. Car looks great, nice sidewall there too.

stevo_12v 10-03-2014 10:35 AM
Quote:
Originally Posted by Wayno (Post 1925052)
Second hand, extremely rare like ssr type c. You'll have much more choice with TE37.
+1 to that. CP-R's in 16x7.. let alone 5x100 fitment for our cars is like finding a unicorn.

Nice wheel choice.

Wayno 10-20-2014 04:32 AM
Quote:
Originally Posted by Timmy_Jones (Post 1970600)
Mini - almost RPF1s. Car looks great, nice sidewall there too.
You mean RPF1 are nearly these because RPF1 are cast :p

Wayno 10-20-2014 04:34 AM
Quote:
Originally Posted by stevo_12v (Post 1970613)
+1 to that. CP-R's in 16x7.. let alone 5x100 fitment for our cars is like finding a unicorn.

Nice wheel choice.
Needs lots of sidewall so they don't fold up when you run over a toothpick like they would if 18".


All times are GMT -4. The time now is 01:26 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.