Howling sound turning - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

go_a_way1 · 12-10-2015, 10:45 AM

^ That I am willing to bet tire rub

mav1178 · 12-10-2015, 02:36 PM

... and now we need information your suspension, wheel/tire, and alignment setup

Ultramaroon · 12-10-2015, 10:14 PM

Quote:

Originally Posted by go_a_way1

Lets all just take random guesses and see who was right

I think its a wheel bearing

Quote:

Originally Posted by go_a_way1

^ That I am willing to bet tire rub

Packofcrows · 12-10-2015, 11:59 PM

Quote:

Originally Posted by Ultramaroon

Looks like Snoop Doggy D-o-G.

Ultramaroon · 12-11-2015, 12:09 AM

Quote:

Originally Posted by Packofcrows

Looks like Snoop Doggy D-o-G.

Skeptical Dog is one of my faves.

azynneo · 12-11-2015, 02:13 AM

Quote:

Originally Posted by mav1178

... and now we need information your suspension, wheel/tire, and alignment setup

gotta find that alignment paper.. also now I hear clicking when i turn all the way right.. hopefully it's not a cv joint

azynneo · 12-11-2015, 05:42 PM

Quote:

Originally Posted by Gear_One_Performance

Does it sound like it's coming specifically from the front or the rear?

it sounds like rear

Ultramaroon · 12-11-2015, 06:20 PM

Quote:

Originally Posted by azynneo

gotta find that alignment paper.. also now I hear clicking when i turn all the way right.. hopefully it's not a cv joint

Does the clicking disappear when you push in the clutch and coast midway through the turn?

If yes, that's a CV joint.

azynneo · 12-14-2015, 05:48 AM

think i've narrowed it down to a worn wheel bearing =/

Ultramaroon · 12-14-2015, 02:13 PM

Quote:

Originally Posted by azynneo

think i've narrowed it down to a worn wheel bearing =/

That'll definitely do it. Get it replaced ASAP. The howling that you hear is generating heat. You don't know when it will fail catastrophically.

azynneo · 12-14-2015, 07:03 PM

Quote:

Originally Posted by Ultramaroon

That'll definitely do it. Get it replaced ASAP. The howling that you hear is generating heat. You don't know when it will fail catastrophically.

any idea on the cost of that?

go_a_way1 · 12-14-2015, 07:04 PM

Quote:

Originally Posted by azynneo

think i've narrowed it down to a worn wheel bearing =/

Quote:

Originally Posted by Ultramaroon

LMAO who was right on the first guess?? This guy

Sorry to hear that it went though, Hope it doesnt cost too much

azynneo · 12-14-2015, 07:17 PM

think a 11 sized lug nut would do it? I believe our standard ones are 12.

Bought some rays lugnuts from evasive motorsports a few months ago after purchasing a frontpipe from them. The sizing says 11x1.25 so when I took the wheels off it looks like the bearings were stripped. I called evasive but they said the rays don't come in 11x1.25 so they said those were standard. Thoughts?

Turdinator · 12-15-2015, 12:20 AM

Quote:

Originally Posted by azynneo

think a 11 sized lug nut would do it? I believe our standard ones are 12.

Bought some rays lugnuts from evasive motorsports a few months ago after purchasing a frontpipe from them. The sizing says 11x1.25 so when I took the wheels off it looks like the bearings were stripped. I called evasive but they said the rays don't come in 11x1.25 so they said those were standard. Thoughts?

I don't think you understand what wheel bearings are. Stripped lugnuts or studs have nothing to do with worn bearings.

12-14-2015, 07:17 PM	#27
azynneo Senior Member Join Date: Jan 2014 Drives: FR-S Location: Cali Posts: 582 Thanks: 50 Thanked 44 Times in 34 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	think a 11 sized lug nut would do it? I believe our standard ones are 12. Bought some rays lugnuts from evasive motorsports a few months ago after purchasing a frontpipe from them. The sizing says 11x1.25 so when I took the wheels off it looks like the bearings were stripped. I called evasive but they said the rays don't come in 11x1.25 so they said those were standard. Thoughts? Last edited by azynneo; 12-14-2015 at 11:21 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turning the FR-S into a Mustang Soon	Areddi	Mid-Atlantic	3	09-15-2015 12:31 PM
Foglights not turning on	Bergen23	Cosmetic Modification (Interior/Exterior/Lighting)	0	03-26-2015 10:57 AM
Sub pop when turning off car	Noob4Life	Electronics \| Audio \| NAV \| Infotainment	2	07-27-2013 04:12 PM
TC turning back on after turning it off	Xdragonxb0i	Issues \| Warranty \| Recalls / TSB	2	02-01-2013 05:19 PM
AC pump turning on and off	BRZY	Issues \| Warranty \| Recalls / TSB	3	11-26-2012 04:17 PM

12-10-2015, 02:36 PM	#16
mav1178 Senior Member Join Date: Apr 2013 Drives: 2005 Toyota Camry Location: 91745 Posts: 6,564 Thanks: 493 Thanked 6,092 Times in 3,029 Posts Mentioned: 95 Post(s) Tagged: 3 Thread(s)	... and now we need information your suspension, wheel/tire, and alignment setup

12-14-2015, 05:48 AM	#23
azynneo Senior Member Join Date: Jan 2014 Drives: FR-S Location: Cali Posts: 582 Thanks: 50 Thanked 44 Times in 34 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	think i've narrowed it down to a worn wheel bearing =/

User Name		Remember Me?
Password