Nameless Performance Equal Length Stepped Header

[pheoxs]

Originally Posted by nelsmar

Is this real life?

Or is this just fantasy?

Sent from my Nexus 4 using Tapatalk 2

[Scooby South]

Originally Posted by Hawaiian

I'm guessing with the pattern of the soot, the interior bolt on that flange wasn't torqued properly. That or the flange could be slightly on a bias. Without a level and the header in hand it's hard to say.

If you send it up to me i can measure that, and take a third party dyno... just saying.

Actually, Since you mentioned it.. The Center nut on that side was a Biznitch to get to.. ended up with Swivel deep Well To tighten that one. if you don't have the right tool for that.. then I can see your point.. Excellent.. again.. not an issue on mine. ... So are you 'really' from Hawaii... I spent 9 years of my life there.. USNAVY Retired..

As for the sound.. its a Gopro that was attached to the back of the car. Sorry I don't have any 'pro-grade' recording equipment.

As for the Catted Header.. It was a Prototype.. not going to happen as far as I know. Jason can correct me..

In other news.. I went on a 350 mile drive today.. kinda to get the ECU accustomed to the new setup.. It definitely feels stronger on the bottom end than the 1st Gen one. That and I got the best Gas mileage I have ever gotten in the car today.. 34 MPG.. up 5/10ths over my Previous best of 33.5.. this was cruising with the Cruise control set at 72 for 98% of the trip.. .. love having a Side Benefit..

Bill

[Hawaiian]

Originally Posted by Scooby South

Actually, Since you mentioned it.. The Center nut on that side was a Biznitch to get to.. ended up with Swivel deep Well To tighten that one. if you don't have the right tool for that.. then I can see your point.. Excellent.. again.. not an issue on mine. ... So are you 'really' from Hawaii... I spent 9 years of my life there.. USNAVY Retired..
Bill

I am. I was born and raised on Oahu spendjng most my time in Kailua, Kaneohe, Paoua, and Waikiki. My sister worked out of Pearl for a while as a civy for the DOD.

[Captain Snooze]

Originally Posted by Scooby South

As for the Catted Header.. It was a Prototype.. not going to happen as far as I know. Jason can correct me..

Huh!? But but but.....*sigh*

[xjohnx]

Originally Posted by Scooby South

That and I got the best Gas mileage I have ever gotten in the car today.. 34 MPG.. up 5/10ths over my Previous best of 33.5.. this was cruising with the Cruise control set at 72 for 98% of the trip.. .. love having a Side Benefit..

Bill

You hear that, ladies and gentlemen? This thing practically pays for itself!

[Thatruth2001]

So basically we have been getting hand jobbed regarding the August release?

Reading the updated information reminds me of the soup Nazi episode of Sinfeld....

No soup for you!

[Scooby South]

Originally Posted by Thatruth2001

So basically we have been getting hand jobbed regarding the August release?

I don't know about all that.. Jason, as of Saturday, told me 3-4 weeks to start production. Thats all I know..Like I say.. haven't been keeping up with this thead... Following it ...yes.. contributing to it.. not until yesteday..

Jason might be able shine some more light on the subject. I just know what I was told. . Hope it works out.. Mainly because they are loosing Business and customers.. *sigh..

Bill

[Calum]

Originally Posted by nelsmar

Is this real life?

Originally Posted by pheoxs

Or is this just fantasy?

Sent from my Nexus 4 using Tapatalk 2

Caught in a landslide

[CARNZ]

Originally Posted by Calum

Caught in a landslide

No escape from reality

[chuchutrain]

It'll come out eventually... If you're sick of waiting then get something else. There are plenty of other options. For the rest of us who aren't in a rush, this'll work just fine whenever it comes out.

Sent from my LG-E970 using Tapatalk 4

[Dustin]

Originally Posted by CARNZ

No escape from reality

Open your eyes

[Draco-REX]

Originally Posted by Dustin

Open your eyes

Look up to the sky

[pheoxs]

Originally Posted by Draco-REX

Look up to the sky

And SEEEEEEEE

Sent from my Nexus 4 using Tapatalk 2

[OnTheFence]

Originally Posted by Scooby South

...Bolted right up with no clearance issues, Fitment issues...didn't have to 'tweek' anything to get it to work

I'd like to think that I've mostly kept abreast of the developments (i.e. have read every page of this thread), so am I unnecessarily hopeful when I read this in thinking "no clearance issues" means that it will fit with the OEM fans?