Open Flash Tablet - OFT TIPS Trick’s & FAQ - Page 22 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FISHBURGLAR · 05-28-2015, 02:52 PM

Quote:

Originally Posted by steve99

P0462 is a hardware issue nothing to do with tune

P050B you will need to disable else it will keep coming back its cold start ignition performance due to quiet start mods, disable it and flash new tune that will also reset ecu and clear the other code, if the P0462 keeps coming back then it likely their is a problem with fuel tank sender unit.

'

awesome thanks will flash the new tune. P0462 hasent come back ever since yesterday so im thinking it was a batch of bad gas or just a fluke. =] thanks steve!

steve99 · 05-28-2015, 02:56 PM

Quote:

Originally Posted by FISHBURGLAR

'

awesome thanks will flash the new tune. P0462 hasent come back ever since yesterday so im thinking it was a batch of bad gas or just a fluke. =] thanks steve!

Its usually due to fuel sender/float in tank sticking or bad connection or just stuffed.

Kelbyat07 · 05-31-2015, 04:45 PM

Just got my OFT can't wait to use it

tonystewart · 05-31-2015, 06:42 PM

Good afternoon
Now that the daughter has returned from college, I modified the Radiator Fan temp settings in RomRaider and flashed the car with the custom V2.063 A01D Stage 2 EL93.
Thank you all for the excellent support and those amazing OFT Tune Tweaks and Information. Steve99 Thank you!

calic · 06-04-2015, 07:25 PM

Does the new oft manager automatically pull the latest tunes? Or do i still need to manually update the tune file in my tablet?

Weapon86 · 06-04-2015, 07:37 PM

Quote:

Originally Posted by calic

Does the new oft manager automatically pull the latest tunes? Or do i still need to manually update the tune file in my tablet?

You have to download the latest tune files on their website and load it on your tablet.

JDsThatGuy · 06-11-2015, 10:00 AM

While trying to flash an update today I got an error when the write was almost done and it completely disabled my start button, I've been trying to re flash the stage 1 I was running but my tablet keeps giving me an error saying to turn the ignition on (it is). Anyone run into this trouble before? My car won't start and I'm sitting here stuck

The reason I was trying to re flash stage 1 is I wanted the updated maps

Kelbyat07 · 06-11-2015, 02:01 PM

Do you guys flash back to stock when you are about to get an oil change? I'm thinking not, but want to make sure.

D_Thissen · 06-11-2015, 02:41 PM

Quote:

Originally Posted by JDsThatGuy

While trying to flash an update today I got an error when the write was almost done and it completely disabled my start button, I've been trying to re flash the stage 1 I was running but my tablet keeps giving me an error saying to turn the ignition on (it is). Anyone run into this trouble before? My car won't start and I'm sitting here stuck

The reason I was trying to re flash stage 1 is I wanted the updated maps

@steve99

phrosty · 06-11-2015, 03:59 PM

Quote:

Originally Posted by Kelbyat07

Do you guys flash back to stock when you are about to get an oil change? I'm thinking not, but want to make sure.

I've gone in several times without flashing back to stock. I don't think they'd know how to tell even if there was a way for them to do so, and there's no evidence that there is.

When I went in a long time ago to get B01D, it took them several hours over two days and multiple calls to corporate to figure out how to flash it. It takes me ~5 minutes with OFT.

smg1138 · 06-11-2015, 05:00 PM

Quote:

Originally Posted by phrosty

I've gone in several times without flashing back to stock. I don't think they'd know how to tell even if there was a way for them to do so, and there's no evidence that there is.

When I went in a long time ago to get B01D, it took them several hours over two days and multiple calls to corporate to figure out how to flash it. It takes me ~5 minutes with OFT.

It's funny how enthusiasts often know more about certain things than the people who do it for a living.

phrosty · 06-11-2015, 06:26 PM

Quote:

Originally Posted by smg1138

It's funny how enthusiasts often know more about certain things than the people who do it for a living.

The scary thing is this means the dealership wasn't aware of B01's safety improvements, and are not recommending this to any people as they come in for oil changes, etc. -- so all those original cars are running around waiting for a hot day of spirited driving to blow their injectors!

steve99 · 06-11-2015, 07:17 PM

Quote:

Originally Posted by JDsThatGuy

While trying to flash an update today I got an error when the write was almost done and it completely disabled my start button, I've been trying to re flash the stage 1 I was running but my tablet keeps giving me an error saying to turn the ignition on (it is). Anyone run into this trouble before? My car won't start and I'm sitting here stuck

The reason I was trying to re flash stage 1 is I wanted the updated maps

Is you car battry good and well charged, low battry will cause flash problems.
Os cable connection between oft and car good

Did you make any alterations to tune with romraider ?
if so did you use v2defs with V2 tunes and not the old v1 defs?

steve99 · 06-11-2015, 07:24 PM

Quote:

Originally Posted by phrosty

I've gone in several times without flashing back to stock. I don't think they'd know how to tell even if there was a way for them to do so, and there's no evidence that there is.

When I went in a long time ago to get B01D, it took them several hours over two days and multiple calls to corporate to figure out how to flash it. It takes me ~5 minutes with OFT.

They can check the CVN (checksum) against a standard rom and work oit its different, but very unlikely at standard service , if you have engine issues flash to stock just to be safe

05-31-2015, 04:45 PM	#297
Kelbyat07 Poor College Kid Join Date: Mar 2013 Drives: ~.~ Location: Chicago Posts: 2,801 Thanks: 246 Thanked 2,182 Times in 1,249 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Just got my OFT can't wait to use it __________________

05-31-2015, 06:42 PM	#298
tonystewart Senior Member Join Date: May 2012 Drives: 2013 Scion FR-S Raven Location: Lake Worth Florida Posts: 1,181 Thanks: 76 Thanked 366 Times in 252 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	Good afternoon Now that the daughter has returned from college, I modified the Radiator Fan temp settings in RomRaider and flashed the car with the custom V2.063 A01D Stage 2 EL93. Thank you all for the excellent support and those amazing OFT Tune Tweaks and Information. Steve99 Thank you! __________________ May'12 AT Raven, OFT V2, Perrin IntakeTube, Pulley & Overpipe,HKS Snorkel,FA20 EL Header,Nameless Frontpipe w/ Helmholtz, Crawford AOS, Cusco O2W Cooler, Grimmspeed Strut/MC Brace, Winjets w/D2S 3.0 HID by Illuminating Lighworkx, Fogs w/EU Stalk, LED's, JDM UnderPanels, Diffuser, Rigid Collars, Whiteline, HVT Camber Plates, Koni's, Swift Springs, GTSpec LCA, SPC Toearms, DBA 4K T-Slot Rotors, Ferodo DS2500, Vorshlag BrakeLines, MichelinPSS, 5Axis Wing, Raammat, Ensolite, JPM Coachworks, OEM+Ref400, 20mmspacers, TOMS

06-11-2015, 10:00 AM	#301
JDsThatGuy Senior Member Join Date: Feb 2015 Drives: Subaru BRZ Limited Location: Atlanta, GA Posts: 265 Thanks: 198 Thanked 65 Times in 51 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	While trying to flash an update today I got an error when the write was almost done and it completely disabled my start button, I've been trying to re flash the stage 1 I was running but my tablet keeps giving me an error saying to turn the ignition on (it is). Anyone run into this trouble before? My car won't start and I'm sitting here stuck The reason I was trying to re flash stage 1 is I wanted the updated maps Last edited by JDsThatGuy; 06-11-2015 at 10:01 AM. Reason: Update

06-11-2015, 02:01 PM	#302
Kelbyat07 Poor College Kid Join Date: Mar 2013 Drives: ~.~ Location: Chicago Posts: 2,801 Thanks: 246 Thanked 2,182 Times in 1,249 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	Do you guys flash back to stock when you are about to get an oil change? I'm thinking not, but want to make sure. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-04-2015, 07:25 PM	#299
calic Member Join Date: Jan 2015 Drives: Subaru Brz Location: Monterey Park Posts: 73 Thanks: 34 Thanked 14 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does the new oft manager automatically pull the latest tunes? Or do i still need to manually update the tune file in my tablet?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Open Flash Tablet	TOZER	Canada Classifieds	3	07-05-2015 08:13 PM
Open Flash Header & Open Flash Tablet	Calavera	Engine, Exhaust, Bolt-Ons	9	05-11-2015 09:27 PM
FS: open flash headers / open flash tablet - SOLD	alanhung85	Canada Classifieds	12	02-10-2015 03:08 PM
FS: Open Flash Tablet (OFT)	mex2309	Engine, Exhaust, Bolt-Ons	1	10-29-2014 03:49 PM
Open flash tablet.	cooldandani	Scion FR-S / Toyota 86 GT86 General Forum	1	02-22-2014 08:14 PM

User Name		Remember Me?
Password