"Type 2" project teaser. :) - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cdo221 · 03-21-2014, 01:40 AM

Quote:

Originally Posted by Wonderbar

Does your tip drop below the "strake" just below the reverse light?

Nope, it's definitely higher than that bottom tip of the bumper strake.. is that where the fitment usually has issues?

Wonderbar · 03-21-2014, 08:31 AM

Quote:

Originally Posted by cdo221

Nope, it's definitely higher than that bottom tip of the bumper strake.. is that where the fitment usually has issues?

That spot or the muffler can itself.

Wonderbar · 03-21-2014, 08:32 AM

Quote:

Originally Posted by xxscaxx

No ark grip. It angles down low, I already know it will not fit just looking lol

Ah, I've never seen that exhaust. You could always mod the diffuser or get a new exhaust.

xxscaxx · 03-21-2014, 09:28 AM

Quote:

Originally Posted by Wonderbar

Ah, I've never seen that exhaust. You could always mod the diffuser or get a new exhaust.

This angle exaggerates it a little bit, but you can see how much "modifying" I would end up having to do from this haha.

Wonderbar · 03-21-2014, 08:03 PM

Hmmm it'd be snug but maybe. I'd have to test fit, it's a hard one to determine by photos. Know anyone in NC with that exhaust?

FT-86 SpeedFactory · 04-09-2014, 12:15 PM

The V2 listing went up a few days ago, and this morning we were able to add some of our own pictures.

Check out the attention to detail!

JohnJuan · 04-25-2014, 04:42 PM

By the way, I found this relevant video of the V2 diffuser mounted on the car: [ame="http://www.youtube.com/watch?v=V-pTAXndX7Q"]Driveway Labs type 2 diffuser, installed, walk around. - YouTube[/ame]

Snowblind · 04-25-2014, 04:54 PM

Quote:

Originally Posted by JohnJuan

By the way, I found this relevant video of the V2 diffuser mounted on the car

Good job..considering it was on the previous page.

JohnJuan · 04-25-2014, 05:49 PM

Quote:

Originally Posted by Snowblind

Good job..considering it was on the previous page.

I'm so good at this.

Snowblind · 05-02-2014, 12:17 AM

Malt · 05-04-2014, 10:54 PM

Carl, you've out done yourself. The type 2 version looks excellent for those that don't want to more "aggressive" look.

phobos512 · 05-05-2014, 03:56 PM

How do these mount to the vehicle at the rear? I see there's some kind of deal at the rear of the OE bumper strakes...is there permanent modification involved (i.e. holes to be drilled in the OE bumper strakes)?

GT86Dan · 05-05-2014, 04:06 PM

would this fit with a berk dual tip axelback ???

Wonderbar · 05-05-2014, 04:51 PM

Quote:

Originally Posted by phobos512

How do these mount to the vehicle at the rear? I see there's some kind of deal at the rear of the OE bumper strakes...is there permanent modification involved (i.e. holes to be drilled in the OE bumper strakes)?

There is zero modification to the stock car, it mounts to the lower sway bar bolts, uses oem Subaru bumper clips on the trail edge and 4 little panel screws into the bumper cover on the left and right ends.

05-05-2014, 03:56 PM	#82
phobos512 Senior Member Join Date: Apr 2014 Drives: 2014 FR-S 6MT Whiteout Location: Southern Maryland Posts: 950 Thanks: 234 Thanked 374 Times in 260 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	How do these mount to the vehicle at the rear? I see there's some kind of deal at the rear of the OE bumper strakes...is there permanent modification involved (i.e. holes to be drilled in the OE bumper strakes)? __________________ Matt \| '14 FR-S 6MT Whiteout \| '13 Sonata Hybrid \| '11 CBR1000RR

05-05-2014, 04:06 PM	#83
GT86Dan Senior Member Join Date: Sep 2013 Drives: 2013 scion frs Location: Union , NJ Posts: 139 Thanks: 41 Thanked 49 Times in 26 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	would this fit with a berk dual tip axelback ??? __________________ Speed has never killed anyone, suddenly becoming stationary… that’s what gets you. – Jeremy Clarkson

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Clicking" or "knocking" caused by rear seat pull down lever.	husker741	Issues \| Warranty \| Recalls / TSB	6	11-27-2013 03:30 PM
"My Dealer told me {insert dumb idea}" (was "Toyota/Subary Partnership Cancelled?")	levifig	BRZ First-Gen (2012+) -- General Topics	48	08-09-2013 07:34 PM
Coat stock rims in a "SBC" type color	jflogerzi	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	2	05-12-2013 09:45 AM
BrzRacer's "Trueno" SWP Brz Project	BrzRacer	Member's Car Journals	17	03-19-2013 12:39 AM
Project "Riced-Out Scion"	VenomRush	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	108	05-14-2011 08:59 AM

04-09-2014, 12:15 PM	#76
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,578 Times in 1,253 Posts Mentioned: 341 Post(s) Tagged: 5 Thread(s)	The V2 listing went up a few days ago, and this morning we were able to add some of our own pictures. Check out the attention to detail!

05-02-2014, 12:17 AM	#80
Snowblind Banned Join Date: Feb 2013 Drives: 2013 FR-S Location: SE Posts: 424 Thanks: 25 Thanked 490 Times in 161 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)

05-04-2014, 10:54 PM	#81
Malt Senior Member Join Date: Oct 2013 Drives: 2015 WRX Location: NC Posts: 987 Thanks: 186 Thanked 624 Times in 364 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	Carl, you've out done yourself. The type 2 version looks excellent for those that don't want to more "aggressive" look.

User Name		Remember Me?
Password