Cross's FRS Build N/A E85 to Rear Mount Turbo then to the Innovate Supercharger

[Cross]

I forgot about the OFH Header, that's going to be here middle of the week so for this weekend I am going to have to just knock the cat out of the factory and run that until my OFH get's here.

I also had to cancel my order with FRSport on the Flywheel and I ordered it from a place on eBay that claims they have it in stock today so it should still get here in time.

[Cross]

Still no luck with a flywheel but it looks like that's not my only issue it seems now the shipping company has gone from a Thursday/Friday delivery to a next week Wednesday or so....

I have gotten after them but if this is the case I guess that means I have more time but it will not be until next weekend that I get the car together.

But in other news the Perrin Pulleys and Kartboy Shifter showed up last night, so glad to have that Kartboy Shifter again that was by far one of my favorite upgrades to the car, night and day different to me. Should have the Airaid tomorrow, and the Driveshaft Friday and my Catback from R3ink should be here Saturday so parts are showing up... guess in the end I now just have more time to find a flywheel and wait for the OFH to show up.

[Cross]

Engine and Trans still in route... so much for install this weekend looks like it will be next weekend but that just means I will have more time to find a flywheel option.

However @moto-mike got me my new tune, I had to ask him how the maps were setup its been so long *laugh* good man Mike always takes care of everything for me I really appreciate it Mike as always.

Oh and the AiRaid intake showed up yesterday, one more piece here now just waiting on the Driveshaft and OFH UEL. Also my new Exhaust should be here this weekend which means I need to drop it off to have the Magnaflow Resonator added to it.

[R3NIK]

New exhaust this week?

[Cross]

The one Victor picked up from you for me

[R3NIK]

Originally Posted by Cross

The one Victor picked up from you for me

Ah, I thought he was delivering it this past weekend to you =)

[Cross]

I thought so but he changed it to this weekend

[Cross]

Alright the current update is the Motor and Trans should be here tomorrow which means tomorrow night I will putt off the transmission and get the flywheel off to test if I can lighten it or if I will be buying a different one.

Went ahead and bought those coil overs and more for the car that I honestly did not need but I couldn't say no. So one more thing to get to install this weekend!

[Cross]

Dropped off the stock flywheel this morning but found out getting it to 13lbs is unlikely maybe 17lbs or 16lbs... still having them do it I will sell it after it's done for cost.

I however found a new option for a Chromoly that says it fits and was just recently released. I can't directly link it from eBay because I am at work so this is the best I can do but I ordered one this morning. Less than 220 shipped for a 13lb flywheel is just what I was wanting.

http://www.ebay.com/itm/400900540122...torefresh=true

Still waiting on the Header to ship from Open Flash though, thought they were in stock as of last week a little sad to hear this to be honest. Hopefully it gets here before Thursday of next week as that's when I am taking it up to Phoenix and I hope to not be on the stock header.

Driveshaft is going to be a few weeks still sadly but oh well can't be helped, just have to use the stock one for now.

I also just bought what appears to be the copy of Nameless's Longtube Header from PLM, seems like I may also be one of the first for these so I guess I get to see how badly they messed it up but honestly it was even cheaper than the OFH with my discount... hard to not give it a try.

https://www.privatelabelmfg.com/Prod...SF-FA20-HEADER

[Cross]

Engine is in now to wait for the flywheel to get here next week, get the transmission in and then get everything else done.

[NissanGuy]

Hey, there's a thought: other OEM seats in an FR-S. Wonder if any are a direct bolt-in...

[Cross]

They were not a direct bolt in but not hard to get to work either. I have the same seats in my GTO as well.

[Cross]

Alright, the Header is ready for pick up (Had to sign for it) and the Flywheel get's delivered today.

Sent an email to @moto-mike last week regarding changing the tune for the new long tube header setup, waiting to hear back. I was hoping my driveshaft might ship sooner but it looks like I will have to use the stock one again for a little while.

[Cross]

Alright got the Flywheel and Clutch in yesterday but my back is pissy with me for trying to get in the trans so I am going to try again tonight with a friend to help me.

The Header showed up and seems to be causing some waves in another thread. I am going to try and install it tonight but most likely Friday.

Here are pictures, even came with a secondary O2 spacer. Also I can't find my calipers so I used a straight edge sorry.