Please post your Aftermarket Seats

[Black Tire]

Originally Posted by WhiteRose

So its better to just get one bucket seat because the driver side is a lot more simpler? (:

Sent from my SM-N900V using Tapatalk

That depends on how you want to use your car. The club that I do track events with has a rule that the passenger seat and restraints must be the same as the ones on the driver's side.

[WhiteRose]

Originally Posted by Black Tire

That depends on how you want to use your car. The club that I do track events with has a rule that the passenger seat and restraints must be the same as the ones on the driver's side.

Well that really depends in where you live. It's honestly a real hassle to get the sensor out of the stock seats to put them into the new one. And who would want to open new seats? The driver's side is a simple plug, yet, the passenger's side is a lot more work. Stock seats and restraints should be good enough for ride alongs at drift events.

Sent from my SM-N900V using Tapatalk

[Pure Automotive]

This is a customer's car.

Sparco Corsas fit but honestly unless you're under 160 lbs and shorter than 5'9" they are a tight squeeze.

[The86Ghost]

Originally Posted by R2RO

Here's my Bride Stradia II Japan Venus in my FR-S

What lip kit do you have?! Looks great!


Sent from my iPhone using Tapatalk

[R2RO]

Originally Posted by The86Ghost

What lip kit do you have?! Looks great!


Sent from my iPhone using Tapatalk

Varis, and thanks

[Boba_kz]

[civicdrivr]

I still haven't installed the passenger side yet.



Sent from my Nexus 4 using Tapatalk

[Liquid6]

Here's my contribution not really after market but not factory either. Lol


Sent from my iPhone using Tapatalk

[MrMarinakos]

Originally Posted by Boba_kz

Did you put the seat warmers in the new seats or is that even possible? And i like the seats

[Boba_kz]

Originally Posted by MrMarinakos

Did you put the seat warmers in the new seats or is that even possible? And i like the seats

Not possible

[Tye300]

Originally Posted by R2RO

Here's my Bride Stradia II Japan Venus in my FR-S

Aside from the TRD seats, which are bride seats also, these are my dream seats!

[Vracer111]

Originally Posted by R2RO

Here's my Bride Stradia II Japan Venus in my FR-S

On your Stradia II's; is that the normal cushion or the lower position cushion? How big are you and how do you fit in the seat - how big/tall of a person could fit properly in the seat? What seat bracket is being used for these and how much lower than stock do you sit in these?

I need a 1" drop minimum, and better ergonomics than the stock drivers seat (which is getting on my nerves) - don't want to go with a fixed seat if I don't have to since it's a daily driver. Will swallow the price for a Stradia II Sport if I can be comfortable in it and have a lower, better driving position with it.

Sorry for all the questions but seats are very important to me both for my physical health and enjoyment of the car. If it were possible I'd mount my Recaro Ergo reclinable seat, but it would substantially raise the seating height, and stock FRS seats are already too high for me.

[Swankiest Raven]

Originally Posted by nograde

does anyone know if the buddy club rails will allow for a lower than stock seat height? Or are the nagisa rails the only ones that will allow this? Thanks.

You probably have found this out or lost interest at this point seeing how it was how many months ago but the Buddy Club rails allow for a lower then stock height.... they have three holes (vertically) in the mounting areas that will allow for a seat to be lowered or risen depending on the needs of the driver and the seat. Makes for an "easy" install but the rails allow so many configurations it takes a while to get it right.

[Swankiest Raven]

[IMG][/IMG]

Recaro Pole Position