Openflash Tablet v1.31 beta maps (including Stage 2!) now available for download

[Shiv@Openflash]

Originally Posted by garfull

@shiv noticed you released 1.32 but also 1.20 is no longer on your site. when would 1.3 go off beta?

In the process of updating the site. Not done yet so please don't update anything yet. Should be done tomorrow and will make an announcement on this forum.

[JPxM0Dz]

Originally Posted by shiv@vishnu

In the process of updating the site. Not done yet so please don't update anything yet. Should be done tomorrow and will make an announcement on this forum.

Any word on updates ? Look forward to data-logging


Thanks

[Shiv@Openflash]

The only official and new update is that V1.31 maps are now officially non-beta:

http://www.procedetuning.com/BRZ_FR-...s-4/index.html

We are trying to get some new maps (including E85 maps) ready before we leave for SEMA on Tuesday. But can't make any promises given time constraints.

Cheers,
Shiv

[Floggin Tires]

Shiv...
...It's Sunday...
...You're allowed a Fu@king weekend

[Shiv@Openflash]

Originally Posted by Floggin Tires

Shiv...
...It's Sunday...
...You're allowed a Fu@king weekend

That would be true if I hadn't recently taken a week off for vacation. Still catching up on lots of stuff

[SliverBrz]

Originally Posted by shiv@vishnu

The only official and new update is that V1.31 maps are now officially non-beta:

http://www.procedetuning.com/BRZ_FR-...s-4/index.html

We are trying to get some new maps (including E85 maps) ready before we leave for SEMA on Tuesday. But can't make any promises given time constraints.

Cheers,
Shiv

if we use the beta maps do we have to reflash? or is it the same thing?

[Shiv@Openflash]

Originally Posted by SliverBrz

if we use the beta maps do we have to reflash? or is it the same thing?

It is the same thing. Just removed the beta status.

[Millions]

Shiv, I'm still throwing the P0171 code. I checked my header and there aren't any leaks. I don't have a defouler on the 02 sensor, and I'm running the Stage 2 flash. I've been tracking my AFR using Torque, and I don't see anything strange. I have noticed that the CEL only comes on at idle though. Any ideas as to what could be wrong?

[vgi]

does anyone know why values in TIR table for the v1.31tune look ok






but TIR values for stock rom look way off?





am I doing something wrong?

[Shiv@Openflash]

There is still a possibility that the XDF file isn't scaled correctly for the transient retard table. This would be easy to confirm if it weren't for the fact that all curent OTS maps are derived for the A00C rom with the nominal values from the A0C rom copied and pasted into it.

So this means that the TIR values in the OTS maps are jerker correct or 20 degrees conservative. Hard to confirm this practically since this map is only active for a fraction of a second at a time during throttle transients. So to eliminate any doubt, the new OTS maps I'll be releasing tomorrow (or Tuesday) will all be native A01C roms and will be accompanied with an updates XDF. I've been testing these maps for the last couple of days and I think they feel a bit more responsive between shifts which would support the notion that the previous OTS maps had the transient retard table was scaled incorrectly. Or it could just be my imagination.

[Millions]

Originally Posted by Millions

Shiv, I'm still throwing the P0171 code. I checked my header and there aren't any leaks. I don't have a defouler on the 02 sensor, and I'm running the Stage 2 flash. I've been tracking my AFR using Torque, and I don't see anything strange. I have noticed that the CEL only comes on at idle though. Any ideas as to what could be wrong?

Shiv@vishnu Sorry to quote myself, but has anyone else had this happen?

[s2d4]

Originally Posted by Millions

Shiv@vishnu Sorry to quote myself, but has anyone else had this happen?

Are you running any intakes?

[jamesm]

Originally Posted by Millions

Shiv, I'm still throwing the P0171 code. I checked my header and there aren't any leaks. I don't have a defouler on the 02 sensor, and I'm running the Stage 2 flash. I've been tracking my AFR using Torque, and I don't see anything strange. I have noticed that the CEL only comes on at idle though. Any ideas as to what could be wrong?

just open that map in tunerpro and turn off the code, save a copy and flash it back on. the beauty of open tuning!

[Shiv@Openflash]

Originally Posted by jamesm

just open that map in tunerpro and turn off the code, save a copy and flash it back on. the beauty of open tuning!

+1
But I don't think the last released XDF has that diagnostic code defined. But it is defined in the latest XDF that I'll be releasing with the next set of maps that will be available for download tomorrow