Kraftwerks Supercharger Owners Thread - Page 73 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

glamcem · 05-13-2014, 05:26 PM

Quote:

Originally Posted by SPCorBUST

I spoke with Joe previously as well. Definitely a helpful guy over there.

Sent from my SGH-M919 using Tapatalk

I also spoke with Joe when I called them to request cogged pulleys he handled everything smoothly

glamcem · 05-13-2014, 05:42 PM

How many of you use heat wrap for this pipe? I wonder if it's necessary since it gets hot after a few pulls and it has the MAF sensor on it.

zoth · 05-13-2014, 06:19 PM

Quote:

Originally Posted by glamcem

How many of you use heat wrap for this pipe? I wonder if it's necessary since it gets hot after a few pulls and it has the MAF sensor on it.

Is your's touching the radiator hose?

vgi · 05-13-2014, 06:21 PM

Quote:

Originally Posted by Model Citizen

There are a few links to hostings/caches in the gross/clean thread

pls pm me

glamcem · 05-13-2014, 07:22 PM

Quote:

Originally Posted by zoth

Is your's touching the radiator hose?

I didn't pay attention to that, I will take a look at it and let you know

SterlingBrz · 05-14-2014, 10:01 AM

Hey guys, wanted to give a quick update on the install and performance. The install was surprisingly easy and really only took about 6 hours all said and done. As for the performance, this thing is an animal now. 1-3 gear pulls are unbeleivable compared to stock, and 100mph comes up a lot quicker than you think. Down low it's comparable to stock, but once you hit 3500-4000 rpms, it's a rocket. 1st gear is gone almost immediately when you floor it. Also I received all the bolts and ecutek license quickly after calling up the guys at kraftwerks. Their customer service has been top notch and they're awesome guys to work with, always polite and very eager to fix any problems and keep the customer happy.
I have an auto x event this weekend so stay posted. I'll try and get some videos uploaded of the event as well as some videos of what everyone really wants, some 0-60 pulls and 0-100 pulls.

post_break · 05-14-2014, 10:27 AM

Still trying to get my belt. Who's got a part number? Just going to order the damn thing.

grostoine · 05-14-2014, 11:56 AM

Hey guys. I wanted to know if any of you are running a 50/50 blow of valve. I will upgrade mine for a Forge Spliter valve.

KraftWerks · 05-14-2014, 01:02 PM

Quote:

Originally Posted by post_break

Still trying to get my belt. Who's got a part number? Just going to order the damn thing.

PM'ed.

SPCorBUST · 05-14-2014, 02:13 PM

Well it looks like i'll be turning my attention to SS lines, pads, fluids, and rotors for now. They're out of C38 molded couplers, but should be getting a shipment in on the 26th.

digital_assassin · 05-14-2014, 02:16 PM

Man, I need to update the first post. Lots of new owners lately. If you don't see your info on there shoot me a PM so I don't have to dig back through pages to get your information.

glamcem · 05-14-2014, 04:01 PM

Quote:

Originally Posted by digital_assassin

Man, I need to update the first post. Lots of new owners lately. If you don't see your info on there shoot me a PM so I don't have to dig back through pages to get your information.

yes, you may also include link to my install photos, see below

I will soon add dyno graphs too
http://www.ft86club.com/forums/showp...4&postcount=17

captain_jack · 05-14-2014, 05:43 PM

Well some things have happened and I need to come up with some money fairly fast. I will be selling my kit. The following parts are new. Blower, oil filter, crank pulley, blower pulley, cogged pulleys, blower banjo bits and crush washers and bottle of rotrex oil. The used parts are intercooler, piping, map sensor, oil cooler and lines, oil reservoir. I am including an extra bottle of rotrex oil as well as smooth pulleys. I realize the group buy us going on still but mine is really new(used parts have less then 3k) but I'm asking 3500. Key me know if you guys know anyone interested.

may the schwartz be with you....

Calum · 05-14-2014, 09:34 PM

Quote:

Originally Posted by captain_jack

Well some things have happened and I need to come up with some money fairly fast. I will be selling my kit. The following parts are new. Blower, oil filter, crank pulley, blower pulley, cogged pulleys, blower banjo bits and crush washers and bottle of rotrex oil. The used parts are intercooler, piping, map sensor, oil cooler and lines, oil reservoir. I am including an extra bottle of rotrex oil as well as smooth pulleys. I realize the group buy us going on still but mine is really new(used parts have less then 3k) but I'm asking 3500. Key me know if you guys know anyone interested.

may the schwartz be with you....

Good luck. It sucks when life kicks you in the ass.

05-13-2014, 05:42 PM	#1010
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s) Tagged: 1 Thread(s)	How many of you use heat wrap for this pipe? I wonder if it's necessary since it gets hot after a few pulls and it has the MAF sensor on it. __________________ 2022 BRZ Track Build (A New Chapter)

05-14-2014, 02:16 PM	#1019
digital_assassin Senior Member Join Date: Feb 2011 Drives: 2013 FR-S Matte Orange Location: Portland, OR Posts: 2,016 Thanks: 489 Thanked 937 Times in 507 Posts Mentioned: 168 Post(s) Tagged: 0 Thread(s)	Man, I need to update the first post. Lots of new owners lately. If you don't see your info on there shoot me a PM so I don't have to dig back through pages to get your information. __________________ NORTHWEST86 DECAL - NORTHWEST86 GEAR MY BUILD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate (Sprintex) Supercharger Owners Topic	DarrenDriven	Forced Induction	9139	12-29-2023 11:58 PM
Kraftwerks Rotrex Supercharger Discussion	nelsmar	Forced Induction	697	01-18-2022 01:06 PM
All SUPERCHARGER kits compilation thread	subatoy	Forced Induction	76	03-10-2016 01:38 PM
Kraftwerks Supercharger??	umpadupa	Forced Induction	1	08-05-2013 06:27 PM

05-14-2014, 10:01 AM	#1014
SterlingBrz Member Join Date: Jan 2014 Drives: 2013 Brz Premium Location: Phila. Burbs Posts: 64 Thanks: 0 Thanked 5 Times in 2 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Hey guys, wanted to give a quick update on the install and performance. The install was surprisingly easy and really only took about 6 hours all said and done. As for the performance, this thing is an animal now. 1-3 gear pulls are unbeleivable compared to stock, and 100mph comes up a lot quicker than you think. Down low it's comparable to stock, but once you hit 3500-4000 rpms, it's a rocket. 1st gear is gone almost immediately when you floor it. Also I received all the bolts and ecutek license quickly after calling up the guys at kraftwerks. Their customer service has been top notch and they're awesome guys to work with, always polite and very eager to fix any problems and keep the customer happy. I have an auto x event this weekend so stay posted. I'll try and get some videos uploaded of the event as well as some videos of what everyone really wants, some 0-60 pulls and 0-100 pulls.

05-14-2014, 11:56 AM	#1016
grostoine Senior Member Join Date: Nov 2012 Drives: Subaru BRZ Location: Quebec Posts: 392 Thanks: 9 Thanked 104 Times in 54 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Hey guys. I wanted to know if any of you are running a 50/50 blow of valve. I will upgrade mine for a Forge Spliter valve.

05-14-2014, 02:13 PM	#1018
SPCorBUST Senior Member Join Date: Dec 2011 Drives: 2013 Subaru BRZ Limited Location: Orange County, CA Posts: 935 Thanks: 525 Thanked 399 Times in 255 Posts Mentioned: 23 Post(s) Tagged: 2 Thread(s)	Well it looks like i'll be turning my attention to SS lines, pads, fluids, and rotors for now. They're out of C38 molded couplers, but should be getting a shipment in on the 26th.

05-14-2014, 05:43 PM	#1021
captain_jack Senior Member Join Date: Sep 2012 Drives: '13 raven frs, '10 taco,09 gsxr 600 Location: Tucson AZ Posts: 1,342 Thanks: 530 Thanked 394 Times in 297 Posts Mentioned: 81 Post(s) Tagged: 0 Thread(s)	Well some things have happened and I need to come up with some money fairly fast. I will be selling my kit. The following parts are new. Blower, oil filter, crank pulley, blower pulley, cogged pulleys, blower banjo bits and crush washers and bottle of rotrex oil. The used parts are intercooler, piping, map sensor, oil cooler and lines, oil reservoir. I am including an extra bottle of rotrex oil as well as smooth pulleys. I realize the group buy us going on still but mine is really new(used parts have less then 3k) but I'm asking 3500. Key me know if you guys know anyone interested. may the schwartz be with you....

User Name		Remember Me?
Password