AVO Turbo Kit Owners Topic - Page 63 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Draco_PR23 · 07-08-2014, 09:18 PM

I just order my Exedy Stg2

My OEM clutch couldn't handle the extra torque but a preliminary number was 254whp in a mustang dyno ... once I install the new clutch will go again to retune it.

protpibe · 07-08-2014, 09:30 PM

Quote:

Originally Posted by Draco_PR23

I just order my Exedy Stg2

My OEM clutch couldn't handle the extra torque but a preliminary number was 254whp in a mustang dyno ... once I install the new clutch will go again to retune it.

Nice.

What kind of boost are you running? 10-11psi I'm assuming?

Draco_PR23 · 07-08-2014, 09:38 PM

Quote:

Originally Posted by protpibe

Nice.

What kind of boost are you running? 10-11psi I'm assuming?

The max we tried was about 9-10psi until we had problems with the clutch so the tuner lower the power so the OEM clutch can handle the power.

I hope to retune it in a couple of weeks to find out the REAL power, I will let you guys know.

nataku · 07-08-2014, 09:48 PM

I dunno how mustang dynos read but I'm at about 290 whp at 10 psi according to a dyno dynamics. My spring pressure base tune was 250ish and the stock clutch held it fine.

Sent from my iPhone using Tapatalk

Draco_PR23 · 07-08-2014, 09:54 PM

I read that Mustang Dynos "will always read ~12% LOWER than a Dynojet"
My numbers using the base map tune at the same dyno was about 232whp@7psi and the clutch was fine.

qtwre · 07-09-2014, 01:48 PM

Let me know if you actually get your clutch. My vendor tells me Exedy is out of stock and has no ETA on when they'll be available.

Draco_PR23 · 07-09-2014, 01:56 PM

Quote:

Originally Posted by qtwre

Let me know if you actually get your clutch. My vendor tells me Exedy is out of stock and has no ETA on when they'll be available.

Yes, they are out of stock everywhere.
SBD managed to get a few from Canada (I think) and they sold all of them.

Mine was shipped yesterday and I am expecting it by the weekend.
I live in Puerto Rico so I am giving it an extra day to arrieve.

qtwre · 07-09-2014, 01:59 PM

Yes, as a Canadian I'm not too pleased with SBD for taking all our clutches... I'm definitely not going to pay to have one shipped back over the border.

Draco_PR23 · 07-09-2014, 02:03 PM

Ohhh and make sense, SBD told me that ETA could be around 4-6 weeks.

King Tut · 07-09-2014, 02:18 PM

Quote:

Originally Posted by Draco_PR23

I read that Mustang Dynos "will always read ~12% LOWER than a Dynojet"

You read incorrectly.

protpibe · 07-09-2014, 02:21 PM

I ordered my exedy a while ago and I'm told it should be here Friday. This is the 3rd time I've been told that though lol

Draco_PR23 · 07-09-2014, 02:22 PM

Quote:

Originally Posted by King Tut

You read incorrectly.

I got the info from here ....
http://www.ft86club.com/forums/showthread.php?t=20572

King Tut · 07-09-2014, 02:26 PM

Quote:

Originally Posted by Draco_PR23

I got the info from here ....
http://www.ft86club.com/forums/showthread.php?t=20572

You forgot the unless part:

Quote:

(unless the shop has messed with the gearing settings in the computer).

blackfireball5 · 07-12-2014, 02:58 PM

Quote:

Originally Posted by protpibe

Here's a link to the vents:

http://greatlakesskipper.com/sea-dog...ose-vent-cover

I found a 4 inch one on a different site. Same brand. Gonna play with it and see how it goes. Thanks!

07-08-2014, 09:48 PM	#872
nataku Negative Mass Join Date: May 2012 Drives: Orange Metallic AVO Turbo GT86 6MT Location: Arlington VA Posts: 702 Thanks: 272 Thanked 345 Times in 201 Posts Mentioned: 56 Post(s) Tagged: 1 Thread(s)	I dunno how mustang dynos read but I'm at about 290 whp at 10 psi according to a dyno dynamics. My spring pressure base tune was 250ish and the stock clutch held it fine. Sent from my iPhone using Tapatalk __________________ Build thread for my Lovely Lady.

07-09-2014, 02:21 PM	#879
protpibe Senior Member Join Date: Oct 2013 Drives: 4-Runner Sport - 13' BRZ SportTech Location: Winnipeg Posts: 1,395 Thanks: 253 Thanked 839 Times in 459 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	I ordered my exedy a while ago and I'm told it should be here Friday. This is the 3rd time I've been told that though lol __________________ Top Tier Imports - Check out my build journal HERE

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate (Sprintex) Supercharger Owners Topic	DarrenDriven	Forced Induction	9139	12-29-2023 11:58 PM
FA20Club Turbo Kit Owners Topic	pixel67	Forced Induction	1531	09-09-2014 01:36 PM
OFF TOPIC: Spotted a Gallardo	markmatley	Hawaii	4	02-24-2013 05:26 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 01:18 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 06:14 PM

07-09-2014, 01:48 PM	#874
qtwre Senior Member Join Date: Jun 2012 Drives: White FR-S Location: GTA, Ontario Posts: 190 Thanks: 15 Thanked 35 Times in 30 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Let me know if you actually get your clutch. My vendor tells me Exedy is out of stock and has no ETA on when they'll be available.

07-09-2014, 01:59 PM	#876
qtwre Senior Member Join Date: Jun 2012 Drives: White FR-S Location: GTA, Ontario Posts: 190 Thanks: 15 Thanked 35 Times in 30 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Yes, as a Canadian I'm not too pleased with SBD for taking all our clutches... I'm definitely not going to pay to have one shipped back over the border.

User Name		Remember Me?
Password