Innovate (Sprintex) Supercharger Owners Topic - Page 244 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DeliciousTuning · 02-14-2014, 04:03 PM

Quote:

Originally Posted by Powersfrs

Can all the coil packs be change easily?

You can change cylinder #1 and #2 without lifting the engine, as there is enough room on the front of the engine to do so. The back though #3 and #4 is a little more work.

Cheers,
William Knose

jamesm · 02-14-2014, 04:13 PM

it took me about 4 hours worthing of banging around to get the plugs out the first time (without lifting the engine). the second time i already knew to take the injector shield things off and it took about an hour or so.

choi0706 · 02-14-2014, 04:25 PM

who has the hardware size and qty? mcmaster has the serrated hardware..

xjohnx · 02-14-2014, 07:44 PM

Quote:

Originally Posted by choi0706

who has the hardware size and qty? mcmaster has the serrated hardware..

Are you talking about these? Just got my replacements in from McMaster Carr today.

New vs old.

choi0706 · 02-14-2014, 10:46 PM

Yeah how many? Figure its better to replace them all..

Quote:

Originally Posted by xjohnx

Are you talking about these? Just got my replacements in from McMaster Carr today.

New vs old.

xjohnx · 02-14-2014, 10:56 PM

Quote:

Originally Posted by choi0706

Yeah how many? Figure its better to replace them all..

I only saw them available by the box of 100. they were only like $12 though.

http://www.mcmaster.com/#91290A326

Jerf · 02-15-2014, 09:07 AM

Here is my 10 series with Innovates kit all installed! It's still in the shop at Davenport in Calgary, I still have coil overs, exhaust, and a bbk to be installed.
Link to dyno vid with results

Name: ImageUploadedByTapatalk1392469607.737619.jpg
Views: 879
Size: 206.0 KB

Name: ImageUploadedByTapatalk1392469624.853657.jpg
Views: 839
Size: 191.6 KB

Sent from my iPhone using Tapatalk

xxscaxx · 02-15-2014, 02:11 PM

congrats @Jerf - enjoy it like the rest of us are

Well due to a few unexpected issues dyno has to wait until next saturday.

kombatlion · 02-15-2014, 02:47 PM

Guys I have a question have been reading and looking at your journals but most of you did not specify what Parts did you install with your Innovate to get the posted horsepower.

For example, headers, overpipe and exhaust and Innovate stage 1 what horsepower can I get?

Sent from my iPhone using Tapatalk

Ryan86 · 02-15-2014, 02:56 PM

Quote:

Originally Posted by kombatlion

Guys I have a question have been reading and looking at your journals but most of you did not specify what Parts did you install with your Innovate to get the posted horsepower.

For example, headers, overpipe and exhaust and Innovate stage 1 what horsepower can I get?

Sent from my iPhone using Tapatalk

Borla header
Overpipe
AFE air filter
Decat 63mm exhaust
Spritex Intercooler 75mm pulley
Delicious Tuned
I've got 100whp gain on my stock dyno with 91OCT

kombatlion · 02-15-2014, 02:56 PM

Wow nice! So you did not bought the stage 2 you just placed an intercooler?

Sent from my iPhone using Tapatalk

Ryan86 · 02-15-2014, 03:01 PM

I got the Sprintex Intercooled kit, which I assume you calling stage 2.
If you have not bought a kit yet I would recommend the Intercooled version

Raven604 · 02-15-2014, 05:11 PM

Calgary is 3000+ feet above sea level too...

Sent from my SGH-I337M using Tapatalk

Jerf · 02-15-2014, 06:13 PM

Quote:

Originally Posted by Raven604

Calgary is 3000+ feet above sea level too...

Sent from my SGH-I337M using Tapatalk

Hmmm?

Sent from my iPhone using Tapatalk

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 11:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 07:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 01:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-18-2012 12:38 AM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 06:14 PM

02-14-2014, 04:13 PM	#3404
jamesm Banned Join Date: Mar 2013 Drives: 2013 FR-S Location: Orlando, FL Posts: 2,929 Thanks: 1,166 Thanked 2,293 Times in 1,180 Posts Mentioned: 313 Post(s) Tagged: 4 Thread(s)	it took me about 4 hours worthing of banging around to get the plugs out the first time (without lifting the engine). the second time i already knew to take the injector shield things off and it took about an hour or so.

02-14-2014, 04:25 PM	#3405
choi0706 Senior Member Join Date: Mar 2012 Drives: t Location: United States Posts: 446 Thanks: 14 Thanked 56 Times in 36 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	who has the hardware size and qty? mcmaster has the serrated hardware..

02-15-2014, 02:11 PM	#3410
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	congrats @Jerf - enjoy it like the rest of us are Well due to a few unexpected issues dyno has to wait until next saturday.

02-15-2014, 03:01 PM	#3414
Ryan86 Road Warrior Join Date: Nov 2012 Drives: Toyota 86 Satin Pearl White Location: Durban, South Africa Posts: 1,651 Thanks: 181 Thanked 544 Times in 359 Posts Mentioned: 59 Post(s) Tagged: 0 Thread(s)	I got the Sprintex Intercooled kit, which I assume you calling stage 2. If you have not bought a kit yet I would recommend the Intercooled version

02-15-2014, 05:11 PM	#3415
Raven604 Senior Member Join Date: Dec 2012 Drives: 2013 Scion FR-S Location: Vancouver Posts: 328 Thanks: 93 Thanked 113 Times in 65 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Calgary is 3000+ feet above sea level too... Sent from my SGH-I337M using Tapatalk

User Name		Remember Me?
Password