Fa20Club.com Turbo Kit FASTEST IN FLORIDA

[Sportsguy83]

Originally Posted by Frs300

@lexusb3 thats not a bad location... have you thought about this? you can add a second one where the buttons are and relocate them by your left knee. me and sportsguy have this setup.

That's the cleanest most awesome location, but expensive as shit!!!

[lbroskee]

Originally Posted by Frs300

@lexusb3 thats not a bad location... have you thought about this? you can add a second one where the buttons are and relocate them by your left knee. me and @Sportsguy83 have this setup.

Or 1 here and 1 in the driver ac vent (air still flows)

[lexusb3]

The shifter ring I did my self sticker bomb and I put a clear over it lol I was bored at work .... Same this time I have spare plexi so ima make use of it ... @sportsguy I love your set up but since u did I i want to be different lol idk I'm picky like that and the one in the Ac vent I live in Florida and today is like 100 degrees outside so the less vent I block the cooler I feel lol

[lexusb3]

It won't hit the shifter the ring it will be flush right infront of it just the picture of the model I just posted was not 100 percent fitted but almost so ill show you the next model later today or so

[lbroskee]

I have no ac issues in broward with that vent closed, but the way ur thinkin, dont do my idea so that i can wen i get mine lol (we already are sharing colors and most likely turbo kits too down the line)

[chadstyle]

Its WAY too hot today!! South Florida is brutal on these cars. Ordering an oil cooler next along with a flex fuel setup and engine mounts. Then I'm all set to go FI.

I looked at my gauge cluster and I can mold in two gauges if I relocate the buttons...I'll just spray it black again when I'm done so it appears factory. Gonna start hunting down some nice gauges that match the BRZ interior well.

[Sportsguy83]

Originally Posted by chadstyle

Its WAY too hot today!! South Florida is brutal on these cars. Ordering an oil cooler next along with a flex fuel setup and engine mounts. Then I'm all set to go FI.

I looked at my gauge cluster and I can mold in two gauges if I relocate the buttons...I'll just spray it black again when I'm done so it appears factory. Gonna start hunting down some nice gauges that match the BRZ interior well.

This can be done with enough skill (which I am SURE you have), the button relocate is not bad, just tight.



I payed a LOT of money for it, you will be saving a pretty penny by DIY. Would have payed you to do it with more time!

[Frs300]

@Sportsguy83 i should have got the dual..oh well aem wideband failsafe should be good for now.

[OjiGeorge]

Someone should make those, they would easily sell for a couple hundred a pop.

[Frs300]

Originally Posted by OjiGeorge

Someone should make those, they would easily sell for a couple hundred a pop.

@PrimeMotoring makes them custom..but someone should mass produce the things. anyone with some patience and fab skills can do this!!

[Sportsguy83]

Originally Posted by Frs300

@Sportsguy83 i should have got the dual..oh well aem wideband failsafe should be good for now.

Ideas change on the fly, I was originally going for only one, then for two to have oil temp, then I sold the oil temp gauge io got because I was getting an oil cooler so I bought a oil pressure one... No I don't have the cooler LOL... but its not that bad because we can read Oil temp off OBD2, Oil pressure theres no way.

[lexusb3]

I will make a model of mine and if you guys have an idea I can draw one out I have the program and pretty much make a pod lol of course if u like them would be cheaper for now espically after I got this turbo I have to stay on a budget lol

[lexusb3]

Originally Posted by lbroskee

I have no ac issues in broward with that vent closed, but the way ur thinkin, dont do my idea so that i can wen i get mine lol (we already are sharing colors and most likely turbo kits too down the line)

Ya I agree lol at least we won't fight each other lol

[chadstyle]

I have a local spot that does vacuform parts for me if I provide a tool. I can create a cluster and then look into pricing for tooling. The tooling is the expensive part but after that's finished the parts that come off are pretty cheap. If there's enough interest I'll figure out cost per part and figure out a way to distribute them without breaking forum rules.