Fa20Club.com Turbo Kit FASTEST IN FLORIDA

[King Tut]

Originally Posted by lbroskee

then the frs will b geared towards an eventual 1000 hp (TX2K) goal

I'd send it to Forged Performance along with $250k. That should get it done.

[NomoreNA]

It will be a while before anyone is hitting 4 digits on this platform. Most of the components needed for those power levels have not even started development.

[lbroskee]

Originally Posted by King Tut

I'd send it to Forged Performance along with $250k. That should get it done.

Long term project, if i can find a way to make it with the fa20 lol

[SmsAlSuwaidi]

Originally Posted by NomoreNA

It will be a while before anyone is hitting 4 digits on this platform. Most of the components needed for those power levels have not even started development.

Darton sleeves are out, only thing left i think is a set of cams and somebody with a huge pocket and similar sized balls

[NomoreNA]

Originally Posted by SmsAlSuwaidi

Darton sleeves are out, only thing left i think is a set of cams and somebody with a huge pocket and similar sized balls

You still need tool steel pins, 625 bolts, L19 studs, damper, rear end, trans, a clutch that can hold that torque, intake manifold and a secondary fuel rail. Thats just a few things.

[SmsAlSuwaidi]

Originally Posted by NomoreNA

You still need tool steel pins, 625 bolts, L19 studs, damper, rear end, trans, a clutch that can hold that torque, intake manifold and a secondary fuel rail. Thats just a few things.

True, but if somebody is willing to pay that amount of money it is doable easily, or slap a 2jzgte
oh yeah the whole drivetrain is a different story

[lexusb3]

Originally Posted by retrosmiths

@lexusb3 Where are you located at?

Sent from my Nexus 7 using Tapatalk 2

Fort Lauderdale

[lexusb3]

Originally Posted by King Tut

I'd send it to Forged Performance along with $250k. That should get it done.

I just read that GTR story lol it's crazy

[lexusb3]

Originally Posted by SmsAlSuwaidi

True, but if somebody is willing to pay that amount of money it is doable easily, or slap a 2jzgte
oh yeah the whole drivetrain is a different story

I'm willing to pay for that but time will only tell because I want to make progression step by step I want to make 300hp 400hp then 500 and so fourth untill I can't lol so keep this thread going and i promise ill make that power
@lbroskee I have the same goals as you lol

[Scalzo]

Hey lexus,
I ended up buying the FA20CLUB turbo kit
few questions, stock tranny can handle the power? how about the brakes? clutch fly wheel?
Have you gone tracking? do you beat your car like you did when you were N/A? Any problems when you installed the kit if you did?

[Sportsguy83]

Originally Posted by King Tut

I'd send it to Forged Performance along with $250k. That should get it done.

HOLY SHIT...............

I just read it. That is unreal!!!

And to think when I was considering ECUTek tuners I actually considered and even called them... WOW............

[NomoreNA]

Originally Posted by Scalzo

Hey lexus,
I ended up buying the FA20CLUB turbo kit
few questions, stock tranny can handle the power? how about the brakes? clutch fly wheel?
Have you gone tracking? do you beat your car like you did when you were N/A? Any problems when you installed the kit if you did?

I can't answer the last 3 questions as they are directed solely towards lexus. Yes the trans will handle it, yes the brakes will be fine "although getting some nice pads and stainless lines would not be a wasted investment" and the clutch/flywheel only need to be addressed if you plan to push 300+.

[Scalzo]

Originally Posted by NomoreNA

I can't answer the last 3 questions as they are directed solely towards lexus. Yes the trans will handle it, yes the brakes will be fine "although getting some nice pads and stainless lines would not be a wasted investment" and the clutch/flywheel only need to be addressed if you plan to push 300+.

Thanks bud
Sorry for thread jack, Recommend any good pads? and SS lines? I was thinking stoptech lines?

I won't be pushing over 300WHP

[NomoreNA]

Originally Posted by Scalzo

Thanks bud
Sorry for thread jack, Recommend any good pads? and SS lines? I was thinking stoptech lines?

I won't be pushing over 300WHP

Stoptech makes good lines on the pads check out the project Mu HC+800