Frs Fog Lights Finally!

[86 FRS]

Originally Posted by lbroskee

the only issue with the stalk is that it has the auto headlight option, so we will b left with a dead spot

for reals? i guess i just go with a different switch then.

[lbroskee]

ya, we discussed it over in the other thread with Nigel. since the FRS doesnt have the hardware for auto lights, it's just kinda like a F U every night lol

[DarkCard]

I'm sold

[86 FRS]

Originally Posted by lbroskee

ya, we discussed it over in the other thread with Nigel. since the FRS doesnt have the hardware for auto lights, it's just kinda like a F U every night lol

lol. so if i use the aftermarket harness from NIGEL without stalk. where is best place to put the switch on? i cannot put beside the trunk buttons coz thats where my dealer installed the alarm LED/bulb.

[lbroskee]

have to look at the car in the AM with some light

[Lonewolf]

Lol at all the people who said the fogs wouldn't help with visibility with this car...something about being too low, durrrrrrrrrrrrrrrrrrrrrrr

[Mo707]

If no one is planning a DIY can someone just post links to everything i would need and ill figure it out and post a DIY within 2 weeks.

[86 FRS]

Originally Posted by Mo707

If no one is planning a DIY can someone just post links to everything i would need and ill figure it out and post a DIY within 2 weeks.

JDM Bezel - Left and Right
http://nigel-jdmparts.com/japan-oem-...g-light-bezels

Aftermarket Harness H11 Socket with on/off switch
http://nigel-jdmparts.com/japan-oem-...h-onoff-switch

Subaru Outback fog Housing- 2 of this
http://www.subarupartsforyou.com/cp_...p?partid=19073

I just need a DIY lol.

[Mo707]

Originally Posted by 86 FRS

JDM Bezel - Left and Right
http://nigel-jdmparts.com/japan-oem-...g-light-bezels

Aftermarket Harness H11 Socket with on/off switch
http://nigel-jdmparts.com/japan-oem-...h-onoff-switch

Subaru Outback fog Housing- 2 of this
http://www.subarupartsforyou.com/cp_...p?partid=19073

I just need a DIY lol.

If thats all i need ill get them ordered ASAP!

[lbroskee]

Originally Posted by 86 FRS

JDM Bezel - Left and Right
http://nigel-jdmparts.com/japan-oem-...g-light-bezels

Aftermarket Harness H11 Socket with on/off switch
http://nigel-jdmparts.com/japan-oem-...h-onoff-switch

Subaru Outback fog Housing- 2 of this
http://www.subarupartsforyou.com/cp_...p?partid=19073

I just need a DIY lol.

since the switch on the harness is separate, looks like you could do up a smaller switch to fit it around ur alarm

[86 FRS]

Originally Posted by Mo707

If thats all i need ill get them ordered ASAP!

I think thats all u need.

Originally Posted by lbroskee

since the switch on the harness is separate, looks like you could do up a smaller switch to fit it around ur alarm

u mean like a small toggle switch? that might work too.

[Mo707]

Originally Posted by 86 FRS

u mean like a small toggle switch? that might work too.

thats what ill be using

[lbroskee]

Originally Posted by 86 FRS

u mean like a small toggle switch? that might work too.

well a button will clearly work for sure since that's wut it is, but in theory a toggle switch should work

[86 FRS]

Originally Posted by Mo707

thats what ill be using

Originally Posted by lbroskee

well a button will clearly work for sure since that's wut it is, but in theory a toggle switch should work

yea i guess ill go that route if i cant find a good place for the switch that it came with the harness. i try to make it OEM look. lol