NW Marketplace v1.0 (CLOSED)

[sachu]

Originally Posted by Aztec

I have a pair of tinted stock tails if you're interested?

I'll give them to you for $60 local pickup. I'm up in Portland area

I'll take them!

[sachu]

Originally Posted by Andrew025

I still have it.

Thanksf or the great price and dibs andrew...just pulled trigger on a tomei header.

glws brother.

[HATED1]

@Kamran did you need to shave/adjust the stock studs? Where are you located?

[Kamran]

Originally Posted by HATED1

@Kamran did you need to shave/adjust the stock studs? Where are you located?

Not sure if I understand you but, no, I did not use these with the oem studs. I had increased my negative camber and tires were rubbing on top hat. So I needed spares, and these were not enough. So I took these off and bought thicker spacers. The studs in the picture came with the spacers and are longer. You don't want to use the oem studs with these, since you are supposed to engage 10 threads with the lug nuts, and with these spacers you can only get 6-8 threads of i remember correctly.
I m in Bellevue during the week and Seattle on the weekends.

[Aztec]

Originally Posted by sachu

I'll take them!

You free today to pick them up? I'm going to be going into portland to get E85, I can meet whereever

[Ultramaroon]

Originally Posted by Aztec

You free today to pick them up? I'm going to be going into portland to get E85, I can meet whereever

Did you already burn through that whole tank?

[Aztec]

Originally Posted by Ultramaroon

Did you already burn through that whole tank?

Naw, just heading down to eugene for the day and filling up so I can go down and come back on one tank
Even with the shorter ratio, my mpg shouldn't be TOO bad I hope

[thehapaone]

Still have these come on guys $500 is nearly as cheap as stock wheels...

Also have my Driveway Labs Type 1 Prototype Diffuser off the car and ready to go $350 or shoot me an offer since it's off the car I'll consider any offers

Originally Posted by thehapaone

Forgestar F14 18x9 +36 in Gold a little bit of curbage on two of the wheels and a small dent in another ran for a year and a half but decided to go with something different.

No tires/TPMS just the wheels

Asking $900 will take pics when I get home today


small dent/defect in one wheel does not effect holding air/balancing



Peeling clear coat and slight curbing on one wheel


All other curbing (only 2 wheels have any curbing)

[Sammakko]

Originally Posted by Sammakko

i have my OFT for sale.

seattle area.

$400

bump.

[Allan13]

Selling tomei type 80 front pipe and exhaust.
Type 80 Front pipe-$250
Type 80 exhaust-$850
Or both for $1000

Let me know! I'm in everett area.

[thehapaone]

Originally Posted by Allan13

Selling tomei type 80 front pipe and exhaust.
Type 80 Front pipe-$250
Type 80 exhaust-$850
Or both for $1000

Let me know! I'm in everett area.

Attachment 117532Attachment 117533

DAMMIT I wish I had money for that Front Pipe

[Brandar]

I have a Set of Stock Headers with one O2 Sensor still attached for sale - $50 and its yours.
A Set of Stock unbaked Headlight housing for sale - $100
A set of Stock Struts and springs as well - $50

[DarrenDriven]

I currently have these BRZ/FR-S springs on the shelf ready for install:
$100 - Manzo 1.75/1.25 springs (part LS-SFR12 / $115 retail / NEW)
$195 - H&R Super Sport 1.2/1.4 springs (part 54408-77 / $369 retail / USED)
$195 - H&R Super Sport 1.2/1.4 springs (part 54408-77 / $369 retail / USED)
$220 - Tein S.Tech 1.3/1.0 springs (part SKQ54-AUB00 / $295 retail / NEW)
$240 - Swift Sport 1.1/1.0 springs (part 4T909 / $399 retail / USED)
$260 - Eibach Sportline 1.4/1.4 springs (part 4.10582 / $323.10 retail / NEW) (2 sets)
(Used springs don't lost stiffness or stance -- just as good as new, just a little dusty)


Spring install takes about an hour, or you can bring your own springs/coilovers in for install:
$100 spring install labor (ADD $20/$40 for new/used coilover install)

[thehapaone]

Someone buy my driveway labs Type 1 diffuser I'll let it go for $300 if you buy it by the weekend