NW Marketplace v1.0 (CLOSED)

[MalcolmHimself]

Originally Posted by FRSBoost

anyone looking for a bossted FRS?
2013 Scion FR-S turnkey ready car done right with all of the goodies. We have upgraded every part of the vehicle to make it a complete one of a kind sports car driver's dream. Starting with the GReddy T518Z -10cm2 actuator turbo kit, marrying it up to the GReddy Supreme SP headers and exhaust system that is designed for the Scion FR-S pushing the motor over 250 horsepower / 213 torques. We have also installed the GReddy Type-S suspension coil over, making it handle like a true track car for the streets. Let's just face it. You can’t just look like any other stock car in the market. To make it look as mean as the motor puts out, it has been fitted with the GReddy X Rocket Bunny Wide-body Aero Kit. Sitting on staggered 18” MOTEGI RACING - MR221 TRAKLITE 1.0 2PC Wheels. 18x9 in the front and 18x10 rear. As for the interior goes, it is second to none. Just upgraded with a fully custom Katzkin red and black leather seats. Just a clean added touch to the car.
Come check out the car at Toyota of Olympia and ask for Joe King

Is the TRD shift knob still facing the wrong way?

[MalcolmHimself]

Originally Posted by FRSBoost

anyone looking for a bossted FRS?
2013 Scion FR-S turnkey ready car done right with all of the goodies. We have upgraded every part of the vehicle to make it a complete one of a kind sports car driver's dream. Starting with the GReddy T518Z -10cm2 actuator turbo kit, marrying it up to the GReddy Supreme SP headers and exhaust system that is designed for the Scion FR-S pushing the motor over 250 horsepower / 213 torques. We have also installed the GReddy Type-S suspension coil over, making it handle like a true track car for the streets. Let's just face it. You can’t just look like any other stock car in the market. To make it look as mean as the motor puts out, it has been fitted with the GReddy X Rocket Bunny Wide-body Aero Kit. Sitting on staggered 18” MOTEGI RACING - MR221 TRAKLITE 1.0 2PC Wheels. 18x9 in the front and 18x10 rear. As for the interior goes, it is second to none. Just upgraded with a fully custom Katzkin red and black leather seats. Just a clean added touch to the car.
Come check out the car at Toyota of Olympia and ask for Joe King

Is the TRD shift knob still facing the wrong way?

[zepfan49]

Originally Posted by PantsDants

TL;DR: Custom catback with some pipe work issues for $100 OBO. Kinda loud with header/front pipe but won't make you deaf.

Full disclosure version:

I have a custom catback that was fabbed up using a Vibrant muffler, resonator and tips. It ended up sounding like a cross between the Magnaflow and ISIS catbacks, and while I really like the tone, it came out just a bit too loud for my tastes with my header and front pipe for daily driving. Since I have a roadtrip planned with my girlfriend later next month, I opted to have the stock system put back on, as I was looking for an excuse to get something quieter anyway. When we took the custom system off however, we noticed a pretty significant leak at one of the welds on the resonator, and that the shop took some uh, creative liberties regarding the connection with the donut gasket.

I mostly just want to cut my losses and hopefully recoup a bit of money in the process, something on the order of $100. The components in the system by themselves were around $200. You could install it as-is or cut the thing apart for the components. It's sitting at my family mechanic's shop right now, so I'd like to get it out of there sooner rather than later. If I can't find a buyer it's going to end up as scrap anyway, so feel free to make an offer!

Is this a single exit design? Pictures?

Sent from my XT1254 using Tapatalk

[PantsDants]

Originally Posted by zepfan49

Is this a single exit design? Pictures?

Sent from my XT1254 using Tapatalk

Dual exit. I'll see if I can get some pictures of it.

[derek1ee]

Originally Posted by Ammunition

I believe fteightysix sells just the clips on their website. You can select which ones specifically (A, B, C) you need - http://www.fteightysix.com/appearanc.../#.VbchLc9VhBc

Thanks! Purchased!

[KouichiM]

Originally Posted by Chen

Where are you located? I might know a guy interested in trading a Perrin for one.

im located in seattle

[Sammakko]

anyone here interested in some AME/Fatlace wheels for their other (4X100) car?


15X8.5, +25mm offset, 4X100, with 225/205 BFG Rivals onboard.

kind of a shot in the dark, but it never hurts to ask.

[Missy]

Anyone interested in a chihuahua? He's a bed hog and keeps farting, no longer love him. Also randomly karate kicks while stealing body heat.. lol

[TimmyC]

Originally Posted by Missy

Anyone interested in a chihuahua? He's a bed hog and keeps farting, no longer love him. Also randomly karate kicks while stealing body heat.. lol

How much $

[Missy]

Originally Posted by TimmyC

How much $

I was just joking, I love the little shit, even if he gasses me out with chicken farts.. not enjoyable but overlooked because cuteness.

[coneracer30]

Originally Posted by coneracer30

I have a few items for sale:

brand new TRD front sway bar 21mm. $200




Set of four oem Michelins. 500miles $350



I am located in Portland but can deliver to autocross in Packwood for the Washington folks.

Thanks for looking.
James

TRD sway bar and oem tires still available.

Originally Posted by TimmyC

How much $

Sent from my LGLS990 using Tapatalk

[Jman1759]

Kluch SL14 Silver Machined Wheels w/ Potenza RE970as Tires (front are 18x8.5 et +35 w/ 225/40/18 tires) (rear are 18x9.5 et +42 w/ 255/35/18 tires) $1500, now $1350!!!

Wheels are in great condition no curb rash, tires are pristine with little wear. Comes with hub centric rings and matching Klutch silver lug nuts.

[PNW FRS]

Originally Posted by Jman1759

Muteki SR35 16+4 closed end black lug nuts 35mm 12x1.25 $50Lugs are in perfect working order. Used, on and off a couple times 8/10.

Does the set include the lock lugs -- and two sockets (reg & lock)?

[Jman1759]

Originally Posted by PNW FRS

Does the set include the lock lugs -- and two sockets (reg & lock)?

Yes it includes the lock lugs. It came with the lock lug socket. The others are standard size and didn't come with their own socket. I believe it's 19MM if I remember correctly.