Japanparts has the OEM under panel kit listed! - Page 15 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Hanakuso · 04-10-2013, 08:17 PM

Quote:

Originally Posted by makalaka

Thanks for sharing; I was getting ready to buy the Harbor Freight jack stands this weekend.

Can you tell me which brand/model of jackstands you got from Autozone? I took a look at their website and they have several blue models.

Hmm i've gotten rid of both Harbor Freight and the Autozone stands recently and upgraded to Esco Jackstands.

They were Duralast and most likely one of the lower weight capacity models. If I had to guess, it was either the 2 or 4 ton model.

OrbitalEllipses · 04-10-2013, 08:42 PM

Quote:

Originally Posted by Hanakuso

Hmm i've gotten rid of both Harbor Freight and the Autozone stands recently and upgraded to Esco Jackstands.

They were Duralast and most likely one of the lower weight capacity models. If I had to guess, it was either the 2 or 4 ton model.

I can't justify jackstands that cost almost as much as the jack I want.

Hanakuso · 04-10-2013, 08:50 PM

Quote:

Originally Posted by OrbitalEllipses

I can't justify jackstands that cost almost as much as the jack I want.

Yeah, but I figured I would never have to buy jack stands again or at least for another decade or so

OrbitalEllipses · 04-10-2013, 08:56 PM

Yeah I said that when I bought my Hein-Werner...now I need a lower jack or trust my life with ramps/2x4 planks.

makalaka · 04-10-2013, 09:02 PM

Quote:

Originally Posted by Hanakuso

Hmm i've gotten rid of both Harbor Freight and the Autozone stands recently and upgraded to Esco Jackstands.

They were Duralast and most likely one of the lower weight capacity models. If I had to guess, it was either the 2 or 4 ton model.

I was looking at the Esco ones too. Did you get the flat top circular ones? If so did you have any issues with the pinch welds getting in the way?

Hanakuso · 04-11-2013, 01:02 PM

Quote:

Originally Posted by makalaka

I was looking at the Esco ones too. Did you get the flat top circular ones? If so did you have any issues with the pinch welds getting in the way?

I got the flap top type. The jack stands sit on top of the pinch welds.

The359 · 07-31-2013, 07:13 PM

Stupid question, but how easy is it to get the underpanels off again if I ever need to get behind them? Is it all just screws and stuff, or some pop off plastic things like the rest of the bodywork?

ZC6BRZ · 07-31-2013, 07:15 PM

Quote:

Originally Posted by The359

Stupid question, but how easy is it to get the underpanels off again if I ever need to get behind them? Is it all just screws and stuff, or some pop off plastic things like the rest of the bodywork?

Easy. bolts and clips.

Phaedrus29 · 07-31-2013, 07:34 PM

Quote:

Originally Posted by The359

Stupid question, but how easy is it to get the underpanels off again if I ever need to get behind them? Is it all just screws and stuff, or some pop off plastic things like the rest of the bodywork?

Impossible to remove...might as well get a new car if you ever need to get behind them, sorry.

Damn ZC6BRZ beat me to it with the truth. Can't we mess with the guy a little bit?

ZC6BRZ · 07-31-2013, 07:36 PM

Quote:

Originally Posted by Phaedrus29

Impossible to remove...might as well get a new car if you ever need to get behind them, sorry.

Damn ZC6BRZ beat me to it with the truth. Can't we mess with the guy a little bit?

I lied. Phaedrus is right. You have to sell your soul to the devil too.

The359 · 07-31-2013, 07:38 PM

Quote:

Originally Posted by ZC6BRZ

I lied. Phaedrus is right. You have to sell your soul to the devil too.

Excellent, now I can upgrade to a Genesis Coupe.

[/troll]

Kostamojen · 06-04-2014, 11:06 PM

Ordered and installed mine with US part numbers that are now available...

USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

No more expensive shipping prices for some extremely lightweight plastic panels! LOL

phobos512 · 06-05-2014, 09:48 PM

Quote:

Originally Posted by Kostamojen

Ordered and installed mine with US part numbers that are now available...

USDM part numbers:

56411CA000 (1)
56411CA010 (1)
42045CA020 (1)
42045CA030 (1)
909140065 (30 can never have too many clips :P )
901000344 (3 bolts that are needed for the big panels, rest can be re-used)
909140007 (4 big clips for the rear panels)

No more expensive shipping prices for some extremely lightweight plastic panels! LOL

Wow that is kickass. $240 out the door.

Malt · 06-05-2014, 10:41 PM

Quote:

Originally Posted by phobos512

Wow that is kickass. $240 out the door.

$196.70 from www.subarugenuineparts.com

Jamie at Chaplin's Subaru is amazing. She's been helping out the folks from NASIOC for years and I doubt you'll find anywhere that's cheaper than here.

07-31-2013, 07:13 PM	#203
The359 X Rated Join Date: Jan 2013 Drives: 2017 BRZ Series.Yellow Location: Pennsylvania Posts: 265 Thanks: 16 Thanked 113 Times in 63 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Stupid question, but how easy is it to get the underpanels off again if I ever need to get behind them? Is it all just screws and stuff, or some pop off plastic things like the rest of the bodywork? __________________ NULLA TENACI INVIA EST VIA My BRZ

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brz Limited Avalable (currently wait listed, but soon. This is not an add.)	Floggin Tires	Great Lakes	2	09-25-2012 02:13 AM
Japanparts.com Review	Sportsguy83	User/Vendor/Sponsor Reviews, Feedback, Comments	7	08-03-2012 10:23 AM
Cars.com has BRZ's listed???	Rick Boxx	BRZ First-Gen (2012+) -- General Topics	0	05-13-2012 03:36 PM
Listed on Autotrader (US)	cassidy0998	Scion FR-S / Toyota 86 GT86 General Forum	3	02-02-2012 12:16 PM
FR-S Officially Listed on the Scion Site	goshamrocks13	Scion FR-S / Toyota 86 GT86 General Forum	32	10-07-2011 12:52 PM

04-10-2013, 08:56 PM	#200
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	Yeah I said that when I bought my Hein-Werner...now I need a lower jack or trust my life with ramps/2x4 planks.

06-04-2014, 11:06 PM	#208
Kostamojen Senior Member Join Date: Oct 2011 Drives: 1993 Impreza w/ WRX Swap + FWD! Location: Roseville, CA Posts: 2,071 Thanks: 217 Thanked 949 Times in 499 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Ordered and installed mine with US part numbers that are now available... USDM part numbers: 56411CA000 (1) 56411CA010 (1) 42045CA020 (1) 42045CA030 (1) 909140065 (30 can never have too many clips :P ) 901000344 (3 bolts that are needed for the big panels, rest can be re-used) 909140007 (4 big clips for the rear panels) No more expensive shipping prices for some extremely lightweight plastic panels! LOL

User Name		Remember Me?
Password