ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[Sivtec]

Originally Posted by bignrichlll

D-bags? Your so cute when you talk getto Joel! but seriously, I dnt think this is a healthy controversy.. Noone ever gets any closure. On the plus side,Im glad that I feel enough like family with "most" of you that we can throw fecal matter back & forth..

[Ninjin]

Originally Posted by 40flash

Brent- I assume the picture is of the fronts. What alignment specs are you using?

Yup it's the fronts. I'm limited on adjustment due to classing rules (no camber plates or LCAs for me). I've maxed out my front camber adjustment at -1° on both sides. Rear is -1.1° on the left and -1.6° on the right. Toe is 0.2° total out in the front and 0.2° total in in the rear.

What I'm pretty sure happened is the fronts got overheated and I continued driving too hard on them and they started disintegrating.

[Bonks86]

Saw a few of us out at Westgate tonight, there were a ton of ppl out

glad i got to meet a few of you

is anyone down for the Fresh Grocery Getters meet @ K1 this Wednesday?

[JesseE]

Originally Posted by FR-Shadow

So is anyone here a golfer? I kinda wana get back into it after so many years and figure az has plenty of courses. Im super rusty and suck so anyone else an amateur

I am looking for golfing buddies to play too, I bought a 10 pack summer deal @ peoria pines for 130$... came with 10 rounds of golf and 3 big buckets of balls!


I want to play tomorrow morning actually if anyone is interested (like 7am)

[jeffsides]

Originally Posted by JesseE

I am looking for golfing buddies to play too, I bought a 10 pack summer deal @ peoria pines for 130$... came with 10 rounds of golf and 3 big buckets of balls!


I want to play tomorrow morning actually if anyone is interested (like 7am)

I can't tomorrow. It's the headlight painting party at my house. Hope to see all of you there!

[JesseE]

Originally Posted by RIPTRD71

Ive asked this before but I have to try one more time. Does ANYONE live in the Glendale/Peoria area that go to the pavs? I would love to get a few flat-4 brothers together to cruise out.

hey I live in peoria, problem is I always work saturdays and I work on the east side so for me to go home to peoria shower/change its already 7-8pm and usually wifey has plans so hard for me to get to pavs, but every once in a while we should do it if i'm off...

Also we should do a west side meet! I'm down almost any night as long as its on the west side!

[JesseE]

Originally Posted by jeffsides

I can't tomorrow. It's the headlight painting party at my house. Hope to see all of you there!

Sounds fun! as amazing as they look painted, I just can't bring myself to put headlights in a oven and burn them like some cracker thin choc chip cookies... mmmm cookies, hungry again now! dammit!

[Ninjin]

Originally Posted by JesseE

hey I live in peoria, problem is I always work saturdays and I work on the east side so for me to go home to peoria shower/change its already 7-8pm and usually wifey has plans so hard for me to get to pavs, but every once in a while we should do it if i'm off...

Also we should do a west side meet! I'm down almost any night as long as its on the west side!

That's a good idea, there seem to be a good number of people on the west side now. Maybe you can even coax @BRZ_Driver out of hiding.

[JesseE]

anyone who would be down to play golf tomorrow in peoria pines (northern and 101) around 7ish text me 503 358 9770

[chrisbfrs]

Originally Posted by TunerLuver

Just pinpointed my idle / CEL issues back to the Injen intake. Turns out that it has a small pinhole defect in the main tube. Going to try to get a replacement from Injen, then sell it, and try something else. Tired of stalling the car and looking like I can't drive 6-speed!

Ive noticed the injen has a bad design. Its mas housing is too small. The mass airflow sensor housing tube needs to be 3 inches diameter. The stock intakc has a 3 inch tube. And every intake ive made for my frs has always worked amd ive always ised a 3 inch tube for MAS.

Modern Ink Tattoo

[Yruyur]

Ahhhh 90 degrees at 440am $@!#/ AZ lol. On my way Jeff.

Sent from a Motorola DynaTAC 8000X

[jeffsides]

Originally Posted by Yruyur

Ahhhh 90 degrees at 440am $@!#/ AZ lol. On my way Jeff.

Sent from a Motorola DynaTAC 8000X

K. I'm up. 😜😫😴😵

[FR-Shadow]

Originally Posted by jeffsides

K. I'm up. 😜😫😴😵

Coffee on?

[Yruyur]

Addresd and gate code again?

Sent from a Motorola DynaTAC 8000X