'15 WRX coilovers on FRS - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

withease · 04-10-2020, 11:12 PM

My buddy has a set of Tein Flex Z (I'm pretty sure) coilovers that he had on his 2015 WRX.

Will they fit on my 13 FRS? Not the technical jargon on how they have different part numbers, but like has anyone actually tried this?

They look very similar to frs coils. I saw a post on this topic but it wasn't as specific. That forum said the rears are the same. Not sure if it came from a credible source or not.

Let me know! If no one knows I might just try it out. They're free so what the heck.

Spuds · 04-11-2020, 03:58 AM

Quote:

Originally Posted by withease

My buddy has a set of Tein Flex Z (I'm pretty sure) coilovers that he had on his 2015 WRX.

Will they fit on my 13 FRS? Not the technical jargon on how they have different part numbers, but like has anyone actually tried this?

They look very similar to frs coils. I saw a post on this topic but it wasn't as specific. That forum said the rears are the same. Not sure if it came from a credible source or not.

Let me know! If no one knows I might just try it out. They're free so what the heck.

They might fit, but why would you want coilovers tuned for a completely different weight distribution, and for greater weight in general?

withease · 04-13-2020, 02:43 PM

Quote:

Originally Posted by Spuds

They might fit, but why would you want coilovers tuned for a completely different weight distribution, and for greater weight in general?

Well I figured the springs might be a little more stiff due to the heavier weight they are meant for. My biggest concern was the length of the coils. From what I notice I think the front sway bar bolts at a different location on the WRX v the BRZ. It's not that I want these coils, but it was something I just wanted to try out.

NoHaveMSG · 04-13-2020, 04:01 PM

Quote:

Originally Posted by withease

Well I figured the springs might be a little more stiff due to the heavier weight they are meant for. My biggest concern was the length of the coils. From what I notice I think the front sway bar bolts at a different location on the WRX v the BRZ. It's not that I want these coils, but it was something I just wanted to try out.

I have a set of Flex Z's that came off my BRZ sitting in a box. Post some measurements I can compare them.

Tcoat · 04-13-2020, 04:24 PM

Asked and answered before. Unless anybody does not believe CSG Mike to be a credible source of info.

https://www.ft86club.com/forums/showthread.php?t=80571

DarkPira7e · 04-13-2020, 06:09 PM

Quote:

Originally Posted by Tcoat

Asked and answered before. Unless anybody does not believe CSG Mike to be a credible source of info.

https://www.ft86club.com/forums/showthread.php?t=80571

BUT WE DONT KNOW IF HE TRIED!!1I

Tcoat · 04-13-2020, 06:45 PM

Quote:

Originally Posted by DarkPira7e

BUT WE DONT KNOW IF HE TRIED!!1I

I will take is word for it.

withease · 04-14-2020, 11:37 AM

I'll try it regardless. Not like its a hard job I just want some more of an explanation on why they won't fit. A simple "no" does not justify.

withease · 04-14-2020, 11:47 AM

Quote:

Originally Posted by NoHaveMSG

I have a set of Flex Z's that came off my BRZ sitting in a box. Post some measurements I can compare them.

Great thank you. Might be a couple days until I am home to see them. Main dimensions I'm concerned about are the Top strut mount to Sway bar mount and Top strut mount to bottom mounting bolt.

Racecomp Engineering · 04-14-2020, 12:11 PM

As mentioned the swaybar mount is completely different on Impreza vs BRZ. The BRZ swaybar mounts to the strut...there will be no way to do that with the Impreza strut. So you would be running without a front swaybar which would suck.

More importantly is the lower mount clevis also may be different since the 2015 WRX has 5x114 hubs vs our 5x100. I don't know if they would fit but my guess is no. Not much of an easy way around that.

- Andrew

churchx · 04-14-2020, 12:30 PM

withease: then if you "will try regardless", remember to do proper alignment when you'll revert to current ones after trying out.

Racecomp Engineering · 04-14-2020, 12:36 PM

@withease You certainly won't be putting them on your car....wait for it.....with ease.

yeeeeeeeeeeah

- Andrew

Tcoat · 04-14-2020, 12:52 PM

Quote:

Originally Posted by Racecomp Engineering

@withease You certainly won't be putting them on your car....wait for it.....with ease.

yeeeeeeeeeeah

- Andrew

I heard that GIF!

withease · 04-14-2020, 04:01 PM

Quote:

Originally Posted by Racecomp Engineering

As mentioned the swaybar mount is completely different on Impreza vs BRZ. The BRZ swaybar mounts to the strut...there will be no way to do that with the Impreza strut. So you would be running without a front swaybar which would suck.

More importantly is the lower mount clevis also may be different since the 2015 WRX has 5x114 hubs vs our 5x100. I don't know if they would fit but my guess is no. Not much of an easy way around that.

- Andrew

Thanks Andrew. Removing the sway bar is not what I am trying to do. They're not going to fit lol. I'll change my name. Hopefully covid kills me before yins do.

04-10-2020, 11:12 PM	#1
withease crappyFRS Join Date: Mar 2019 Drives: 2013 Scion FRS 10 Series Location: PA Posts: 8 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 1 Post(s) Tagged: 0 Thread(s)	'15 WRX coilovers on FRS My buddy has a set of Tein Flex Z (I'm pretty sure) coilovers that he had on his 2015 WRX. Will they fit on my 13 FRS? Not the technical jargon on how they have different part numbers, but like has anyone actually tried this? They look very similar to frs coils. I saw a post on this topic but it wasn't as specific. That forum said the rears are the same. Not sure if it came from a credible source or not. Let me know! If no one knows I might just try it out. They're free so what the heck.

04-13-2020, 04:24 PM	#5
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,846 Thanks: 61,656 Thanked 108,283 Times in 46,456 Posts Mentioned: 2492 Post(s) Tagged: 50 Thread(s)	Asked and answered before. Unless anybody does not believe CSG Mike to be a credible source of info. https://www.ft86club.com/forums/showthread.php?t=80571 __________________ Racecar spelled backwards is Racecar, because Racecar.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coilovers Coilovers, Coilovers: Tein, KW, BC, D2, Cusco, Eibach + more FREE SHIPPING!	No Limit Motorsport	Brakes, Suspension, Chassis	204	05-26-2017 01:09 PM
FREE Shipping: ISC N1 Coilovers: ST Coilovers in stock at B2autodesigns	b2autodesigns	Brakes, Suspension, Chassis	177	02-09-2015 12:34 PM
WTB: Ksport Control Pro Coilovers or BC Racing Extreme Low Coilovers	ProjectBrz	Brakes, Suspension, Chassis	1	04-15-2014 01:21 AM
* BC Racing BR Coilovers & Stance Super Sport Coilovers \| IN STOCK \| FAST SHIPPING *	Speed Element	Brakes, Suspension, Chassis	21	03-03-2014 09:56 PM
FS: (IL) KW Variant 3 coilovers and Stance Super Sport Coilovers	ill roller	Brakes, Suspension, Chassis	5	12-14-2013 04:02 PM

04-14-2020, 11:37 AM	#8
withease crappyFRS Join Date: Mar 2019 Drives: 2013 Scion FRS 10 Series Location: PA Posts: 8 Thanks: 0 Thanked 1 Time in 1 Post Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I'll try it regardless. Not like its a hard job I just want some more of an explanation on why they won't fit. A simple "no" does not justify.

04-14-2020, 12:11 PM	#10
Racecomp Engineering Join Date: Nov 2011 Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI Location: Severn, MD Posts: 5,363 Thanks: 3,386 Thanked 7,200 Times in 2,942 Posts Mentioned: 301 Post(s) Tagged: 9 Thread(s)	As mentioned the swaybar mount is completely different on Impreza vs BRZ. The BRZ swaybar mounts to the strut...there will be no way to do that with the Impreza strut. So you would be running without a front swaybar which would suck. More importantly is the lower mount clevis also may be different since the 2015 WRX has 5x114 hubs vs our 5x100. I don't know if they would fit but my guess is no. Not much of an easy way around that. - Andrew

04-14-2020, 12:30 PM	#11
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,332 Thanks: 695 Thanked 2,084 Times in 1,435 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	withease: then if you "will try regardless", remember to do proper alignment when you'll revert to current ones after trying out.

04-14-2020, 12:36 PM	#12
Racecomp Engineering Join Date: Nov 2011 Drives: 2016 BRZ, 2012 Paris Di2 & 2018 STI Location: Severn, MD Posts: 5,363 Thanks: 3,386 Thanked 7,200 Times in 2,942 Posts Mentioned: 301 Post(s) Tagged: 9 Thread(s)	@withease You certainly won't be putting them on your car....wait for it.....with ease. yeeeeeeeeeeah - Andrew

User Name		Remember Me?
Password