Visconti Tuning - Latest BRZ Flash Info - Page 400 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Carwhisperer · 07-02-2013, 06:31 PM

Quote:

Originally Posted by cnk

Yup. Put mine in on the 20th. Still waiting patiently.

I did as well. John must've had a ton of tickets opened before hand asking for the update before he stated to ticket up, especially if he already pushed out 40 updates. Unless if he's got a lott more frs/brz customers than I think.

Trashed675 · 07-02-2013, 06:39 PM

Quote:

Originally Posted by Carwhisperer

I did as well. John must've had a ton of tickets opened before hand asking for the update before he stated to ticket up, especially if he already pushed out 40 updates. Unless if he's got a lott more frs/brz customers than I think.

He also does GTR's, jukes, 370z's, and bmw's. The wheels turn slowly but they get done.

Carwhisperer · 07-02-2013, 07:06 PM

Quote:

Originally Posted by Trashed675

He also does GTR's, jukes, 370z's, and bmw's. The wheels turn slowly but they get done.

Completely aware.

Opposed · 07-02-2013, 07:11 PM

Quote:

Originally Posted by cnk

Yup. Put mine in on the 20th. Still waiting patiently.

Same here. Ticket was put in 13 days ago.

CBR600RR · 07-03-2013, 11:56 AM

also still waiting patiently since the 20th

rx3 · 07-03-2013, 12:06 PM

Quote:

Originally Posted by Carwhisperer

Completely aware.

The v1.14 file I've received produced a CEL, so I went back to stock.
(Maybe it needs some more debugging).

Carwhisperer · 07-03-2013, 01:51 PM

Quote:

Originally Posted by rx3

The v1.14 file I've received produced a CEL, so I went back to stock.
(Maybe it needs some more debugging).

Flash back to 1.14 and try to reproduce what you were doing when you first got the code. Look it up and see what you get. Did you install a CAI recently? Also were you stage 1 stock headers or stage 2 aftermarket headers?

rx3 · 07-03-2013, 04:00 PM

No it's all stock. I haven't changed anything.
I've installed the v1.14 file three times. The CEL was on after uploading the file and before I started the engine and wouldn't disappear afterwards. It went away as soon as I uploaded the stock file (old stock file also from Visconti) and reappeared again when I uploaded the v1.14 file.
There were three codes and they were emission and fuel pressure related. (I didn't write them down though).

whitefrs · 07-03-2013, 04:17 PM

Quote:

Originally Posted by rx3

No it's all stock. I haven't changed anything.
I've installed the v1.14 file three times. The CEL was on after uploading the file and before I started the engine and wouldn't disappear afterwards. It went away as soon as I uploaded the stock file (old stock file also from Visconti) and reappeared again when I uploaded the v1.14 file.
There were three codes and they were emission and fuel pressure related. (I didn't write them down though).

Everytime u flash an ecu
All present codes will be deleted

Jeong · 07-03-2013, 04:19 PM

i submitted a ticket for the new flash 2 weeks ago. still haven't heard anything. i know its a slow process but it didnt take this long last time

anyone got theirs sooner than mine?

rx3 · 07-03-2013, 05:12 PM

Quote:

Originally Posted by whitefrs

Everytime u flash an ecu
All present codes will be deleted

I've noticed that too (it does say that it's clearing the DTCs during the upload).

Just to make it clear: There weren't any codes before I uploaded the v1.14 file (I know because I was playing around with Torque Pro) and there aren't any now after uploading the old stock file. (The v1.14 file appeared to somehow upload the 3 DTCs right after it cleared all DTCs).
(I just mentioned it, because this may also be reason why there is a delay. Or maybe not - I don't know.)

Carwhisperer · 07-03-2013, 05:22 PM

Quote:

Originally Posted by rx3

No it's all stock. I haven't changed anything.
I've installed the v1.14 file three times. The CEL was on after uploading the file and before I started the engine and wouldn't disappear afterwards. It went away as soon as I uploaded the stock file (old stock file also from Visconti) and reappeared again when I uploaded the v1.14 file.
There were three codes and they were emission and fuel pressure related. (I didn't write them down though).

Exactly what I thought it was. I'm getting P0456 (very small emission leak).. probably a bad gas cap, I'm hoping at least.. idk.. It keeps throwing that code over and over within a couple days of clearing it. Although, I'm not on v1.14 and I get it with my stock rom as well.

rx3 · 07-03-2013, 05:33 PM

Ok. But why would this code only be provoked with the v1.14 and not with the stock file?
Anyway, I need to bring it to the dealer for another reason (so no flashing for now), but I can play around some more after that.
(I've been paranoid about this missing A01 fix (dealers here have no clue) and haven't been daily driving it.)

Carwhisperer · 07-03-2013, 09:20 PM

Got v1.14 thanks john!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) -- General Topics	130	09-01-2011 02:42 PM

07-03-2013, 11:56 AM	#5591
CBR600RR Senior Member Join Date: Jul 2012 Drives: Raven Black Location: Ottawa, Canada Posts: 1,343 Thanks: 451 Thanked 563 Times in 276 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	also still waiting patiently since the 20th

07-03-2013, 04:00 PM	#5594
rx3 Senior Member Join Date: Mar 2013 Drives: BRZ Location: Europe Posts: 350 Thanks: 53 Thanked 114 Times in 71 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	No it's all stock. I haven't changed anything. I've installed the v1.14 file three times. The CEL was on after uploading the file and before I started the engine and wouldn't disappear afterwards. It went away as soon as I uploaded the stock file (old stock file also from Visconti) and reappeared again when I uploaded the v1.14 file. There were three codes and they were emission and fuel pressure related. (I didn't write them down though).

07-03-2013, 04:19 PM	#5596
Jeong Senior Member Join Date: Jul 2012 Drives: pet dragon Location: orange county/san diego Posts: 222 Thanks: 43 Thanked 27 Times in 21 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	i submitted a ticket for the new flash 2 weeks ago. still haven't heard anything. i know its a slow process but it didnt take this long last time anyone got theirs sooner than mine?

07-03-2013, 05:33 PM	#5599
rx3 Senior Member Join Date: Mar 2013 Drives: BRZ Location: Europe Posts: 350 Thanks: 53 Thanked 114 Times in 71 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Ok. But why would this code only be provoked with the v1.14 and not with the stock file? Anyway, I need to bring it to the dealer for another reason (so no flashing for now), but I can play around some more after that. (I've been paranoid about this missing A01 fix (dealers here have no clue) and haven't been daily driving it.)

07-03-2013, 09:20 PM	#5600
Carwhisperer Senior Member Join Date: Jan 2012 Drives: A lot of supercars. Location: USA Posts: 495 Thanks: 237 Thanked 148 Times in 90 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Got v1.14 thanks john!

User Name		Remember Me?
Password