Hanakuso's Whiteout FR-S

[Hanakuso]

Originally Posted by AZOOZ_95

First off, nice mods. Second is can u make a DIY step by step. And r they hard to install?

Thanks. Which would you want a DIY for? Both the armrest and coilovers were easy to install, just takes time and patience.

[AZOOZ_95]

Originally Posted by Hanakuso

Thanks. Which would you want a DIY for? Both the armrest and coilovers were easy to install, just takes time and patience.

I meant the armrest

[Hanakuso]

Originally Posted by AZOOZ_95

I meant the armrest

It would be hard to make a DIY since I've already done the drilling and all that. I used this PDF and it was easy. Just make sure you double or triple check all your measurements before you start drilling.

http://www.toyota-tech.eu/aimuploads..._002_827_0.pdf

[Hanakuso]

Small update. I got BRZ Premium front seats, TRD intake, Saikou Michi catch can, 400/500 lbs Eibach springs and ordered the Perrin oil cooler kit. I'll post more pictures later.

[Vinspin]

Originally Posted by Hanakuso

Recently went to Streets of Willows. Had a great time!


Same day I came back to a huge package. It was the JDM Subaru/Toyota underpanel set. Here is a picture with it installed on the left side to show a comparison.

Hi is the part thats being covered by the jdm underpanel part of the whole chassis? or like bolt on metal that can be replaced.

[Hanakuso]

Originally Posted by Vinspin

Hi is the part thats being covered by the jdm underpanel part of the whole chassis? or like bolt on metal that can be replaced.

Yes it all screws into metal if I remember correctly. You need to remove the the undercoating (paint & foam) that covers them

[Vinspin]

Originally Posted by Hanakuso

I haven't notice any difference between the 7 inch OEM vs my 8 RPF1


Installed my new coilovers. Eibach R2. I also installed the OEM armrest. I still need to get to installing the perrin Front and over pipe....

Heres the pic