WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1699 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Ultramaroon · 07-12-2022, 02:51 AM

Quote:

Originally Posted by blsfrs

Have you ever looked down at your nuts and decided you didn't like them anymore? I had Gorilla nuts and got tired of using their special socket, especially since it always seemed to roll under the middle of the car. This weekend I switched to McGard. I like my nuts better now.

I've heard good things about Deez Nuts.

orz · 07-13-2022, 11:21 PM

Parts I had from an old project. It required a special horn retainer that wasn't included in the kit or screws to mount the wheel.

SRS Light bypassed.

Some heatshrink to help the wire management.

All buttoned up.

I'm going to need a lever extension.

I went with a Momo Monte Carlo 350mm to keep it looking factory like an NSXR wheel. I suspect the 320mm wheel option would make hwy commutes touch sensitive due to the smaller diameter.

Overall, I think it look sharp. Just gotta torque everything down and adjust the horn but it works, and the Scion Badge is gone.

-Cheers.

arxm · 07-14-2022, 03:24 PM

called the dealer asking for a crank seal, had the parts guy tell me these boxers dont have them, i asked him to confirm and I spoke with the service manager who also told me they dont have a crank seal...yikes. Im very glad i opted to not have them do the recall for the valve springs haha

Busybee · 07-14-2022, 03:46 PM

OMG! That’s scary

Isn’t it the 806792010 (brz-2013-2023)
Pffff….

Sent from my iPhone using Tapatalk

keenanok · 07-14-2022, 11:52 PM

it decided to rain while i was putting my stock intake back on. while i’m waiting i snapped this sweet shot

Teseo · 07-15-2022, 06:59 PM

Quote:

Originally Posted by Ultramaroon

Changed the fuel filter

How was the task?
Do you bought the complete assembly or just the sock?

suppjc · 07-15-2022, 10:25 PM

Last week it was my perfect camping companion for two

Ultramaroon · 07-15-2022, 11:01 PM

Quote:

Originally Posted by Teseo

How was the task?
Do you bought the complete assembly or just the sock?

Sorry. Got carried away shitposting.

https://www.ft86club.com/forums/showthread.php?t=150086

2020BRZtS · 07-15-2022, 11:23 PM

Quote:

Originally Posted by keenanok

it decided to rain while i was putting my stock intake back on. while i’m waiting i snapped this sweet shot

When people say the paint on these cars is crap please reference this picture.

Spairo · 07-15-2022, 11:43 PM

Put on the track tires and brakes for an SCCA HPDE tomorrow. Rebuilt the driver's side axle last weekend.

Sent from my SM-G950U using Tapatalk

blsfrs · 07-16-2022, 11:35 AM

I installed Verus Wheel deflectors. Overall, I pleased with the quality of the product. They come with 2 extra pieces depending on whether you have a front splitter (which I do). If you don't have a splitter, the deflector is installed using 3 of the 4 original plastic fasteners that held the oem deflector. Even with supplied washers, this would be flimsy since the fender liner to which it is attached is very thin material. With the splitter option, the deflector is bolted to the splitter and is much more solid.

I still may reinforce the inner attachment points since it wouldn't take much of a hit from road debris to knock it loose.

RToyo86 · 07-16-2022, 06:29 PM

Refreshed the 3 year old caliper paint. Inner part of the caliper was still nice and shiny.. road salt and debris killed the exposed bits.

orz · 07-17-2022, 12:23 AM

Had to get a wheel correction because no one likes a crooked steering wheel. Installed a turn signal extension so it's more street friendly.

-Cheers

arxm · 07-17-2022, 02:55 AM

Quote:

Originally Posted by Busybee

OMG! That’s scary

Isn’t it the 806792010 (brz-2013-2023)
Pffff….

Sent from my iPhone using Tapatalk

yup, well toyota part # SU003-02180

07-13-2022, 11:21 PM	#23774
orz Member Join Date: Dec 2015 Drives: Halo Location: Castroville Posts: 59 Thanks: 31 Thanked 97 Times in 38 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	New Parts for my baby. Parts I had from an old project. It required a special horn retainer that wasn't included in the kit or screws to mount the wheel. SRS Light bypassed. Some heatshrink to help the wire management. All buttoned up. I'm going to need a lever extension. I went with a Momo Monte Carlo 350mm to keep it looking factory like an NSXR wheel. I suspect the 320mm wheel option would make hwy commutes touch sensitive due to the smaller diameter. Overall, I think it look sharp. Just gotta torque everything down and adjust the horn but it works, and the Scion Badge is gone. -Cheers. __________________ Last edited by orz; 07-20-2022 at 01:58 AM.

07-14-2022, 03:24 PM	#23775
arxm Senior Member Join Date: Jan 2017 Drives: 2013 FR-S, 2023 BRZ Location: Toronto Posts: 247 Thanks: 106 Thanked 74 Times in 46 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	called the dealer asking for a crank seal, had the parts guy tell me these boxers dont have them, i asked him to confirm and I spoke with the service manager who also told me they dont have a crank seal...yikes. Im very glad i opted to not have them do the recall for the valve springs haha __________________ 2013 Whiteout FRS 6MT with a JRSC RS Pulley @ 500ish WHP 2023 Ignition Red BRZ 6MT awaiting boost

07-14-2022, 03:46 PM	#23776
Busybee Senior Member Join Date: Feb 2018 Drives: BRZ limited Location: MA and NY Posts: 409 Thanks: 1,700 Thanked 211 Times in 106 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	OMG! That’s scary Isn’t it the 806792010 (brz-2013-2023) Pffff…. Sent from my iPhone using Tapatalk __________________ Mazda 323F BA 1997 - Overseas Mazda 323 BG 1994 - Sold Mazda 323 BG 1991 - Sold

07-15-2022, 10:25 PM	#23779
suppjc Member Join Date: Sep 2020 Drives: 2015 Scion FR-S Firestorm Location: Alberta Posts: 57 Thanks: 55 Thanked 49 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Last week it was my perfect camping companion for two Attached Images

07-16-2022, 11:35 AM	#23783
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,060 Thanks: 1,605 Thanked 845 Times in 440 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Verus wheel deflectors I installed Verus Wheel deflectors. Overall, I pleased with the quality of the product. They come with 2 extra pieces depending on whether you have a front splitter (which I do). If you don't have a splitter, the deflector is installed using 3 of the 4 original plastic fasteners that held the oem deflector. Even with supplied washers, this would be flimsy since the fender liner to which it is attached is very thin material. With the splitter option, the deflector is bolted to the splitter and is much more solid. I still may reinforce the inner attachment points since it wouldn't take much of a hit from road debris to knock it loose. Attached Images

07-14-2022, 11:52 PM	#23777
keenanok Member Join Date: May 2022 Drives: 2013 Whiteout FR-S Location: Las Vegas Posts: 24 Thanks: 4 Thanked 43 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	it decided to rain while i was putting my stock intake back on. while i’m waiting i snapped this sweet shot

07-15-2022, 11:43 PM	#23782
Spairo Member Join Date: Dec 2016 Drives: 2013 FR-S 6 spd in Halo Location: San Diego Posts: 79 Thanks: 10 Thanked 66 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Put on the track tires and brakes for an SCCA HPDE tomorrow. Rebuilt the driver's side axle last weekend. Sent from my SM-G950U using Tapatalk

07-16-2022, 06:29 PM	#23784
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,127 Thanks: 1,673 Thanked 2,144 Times in 1,104 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Refreshed the 3 year old caliper paint. Inner part of the caliper was still nice and shiny.. road salt and debris killed the exposed bits.

07-17-2022, 12:23 AM	#23785
orz Member Join Date: Dec 2015 Drives: Halo Location: Castroville Posts: 59 Thanks: 31 Thanked 97 Times in 38 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Aftermarket steering wheel part 2 Had to get a wheel correction because no one likes a crooked steering wheel. Installed a turn signal extension so it's more street friendly. -Cheers __________________ Last edited by orz; 07-20-2022 at 12:56 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 01:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 05:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 07:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 02:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 11:19 PM

User Name		Remember Me?
Password