WHAT DID YOU DO TO YOUR FRS TODAY?

[Ashikabi]

Originally Posted by OrangeGuitar

Oops. I actually didn't see the earlier link. That looked like I was slamming you.

Truth is I'm living vicariously through all of you since losing the BRZ to a head on collision back in January. No worries a new One is on order so I can start dreaming of mods all over again.


Sent from my iPhone using Tapatalk

It's cool. I looked at the first link but missed the .5v input thing. It was my fault for not looking thoroughly

[William E Lough]

took a spirited drive through Northern Baltimore and Harford Counties today(right below Pa state line)nice crisp and clear day for some twisty country roads and some nanny free fun.

[adrian067]

Installed some spec d headlights Thursday night.

[notout86]

Originally Posted by MJones_RB

Yes, original was that gray kind of paper. New is just white. Different part #. I think Subaru uses the carbon ones but Toyota uses the cheaper ones.

Impregnate with carbon by driving behind a poorly tuned diesel vehicle for a while.

[notout86]

Originally Posted by 826-TRD

Out with the old and in with the new, should be good for another 3 years!

Nice even wear.

Don't you HATE that the tread pattern is asymmetrical ( like / / and not / \ ) no matter how much you reverse the tyres on the wheels.

[Itsthebeast]

Originally Posted by notout86

Nice even wear.

Don't you HATE that the tread pattern is asymmetrical ( like / / and not / \ ) no matter how much you reverse the tyres on the wheels.

Isnt that so it moves water out instead of right to the middle of the tire?

Sent from my SM-N920P using Tapatalk

[Wise]

I put on shockworks coilovers and whiteline 22mm front, 17mm rear sway bars and endlinks on the car last Saturday and got an alignment done yesterday.

Car handles like a damn go cart now. Really happy with the change.

[notout86]

Originally Posted by Itsthebeast

Isnt that so it moves water out instead of right to the middle of the tire?

Sent from my SM-N920P using Tapatalk

In isolation you are right Itsthebeast. Now consider the pairs of tyres .

What I mean is, looking from behind the car, the left tyre tread should be like / and the right like \ . Same looking from the front. If they are both / / then the friction forces on the road make the car tend to go in circles.

The downside of my preference is that, apart from looks, in the wet, water from each tyre would be shed towards the center of the car causing an enema effect and also tyre roar would be in phase and therefore louder from inside the car.

Why does everything in life have to be a compromise!

Is this doing your head in?

[EINSTEIN562]

86CUP SoCal Region!

[ame]http://youtu.be/1QYzPt8HnZk[/ame]

[guybo]

I installed SPC camber bolts today. The rear camber arms will go on in a couple weeks then I'll get an alignment. That's all for today

[nico_rsx]

Originally Posted by EINSTEIN562

86CUP SoCal Region!

Really nice!
Where is the mic? I'm guessing somewhere inside the car, the sound is really good. Is it the stock exhaust?

[zeal86]

I received the new Aluminum Coolant Overflow Tank from Mishimoto tonight! Man this thing is pretty! If you have ever seen my engine bay you'd understand why I can gets so excited about such a simple part. The OEM overflow tank is so out of place in my engine bay...it will only get worse as the white plastic yellows over time. Cant wait to install it!









__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

[Lunatic]

Originally Posted by zeal86

I received the new Aluminum Coolant Overflow Tank from Mishimoto tonight! Man this thing is pretty! If you have ever seen my engine bay you'd understand why I can gets so excited about such a simple part. The OEM overflow tank is so out of place in my engine bay...it will only get worse as the white plastic yellows over time. Cant wait to install it!

Please post pictures of it installed

[weederr33]

Originally Posted by zeal86

I received the new Aluminum Coolant Overflow Tank from Mishimoto tonight! Man this thing is pretty! If you have ever seen my engine bay you'd understand why I can gets so excited about such a simple part. The OEM overflow tank is so out of place in my engine bay...it will only get worse as the white plastic yellows over time. Cant wait to install it!









__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Wow, that truly is a beautiful hunk of metal. I'm tempted to get one now but I'm sooooo broke :S