WHAT DID YOU DO TO YOUR BRZ TODAY?

[Guillaume]

Originally Posted by 10Stars

Thats a lot of driving. I'm at 4300 since December

Then again, Easter Island isn't all that big.

[s0sl0w]

Originally Posted by 10Stars

Thats a lot of driving. I'm at 4300 since December

Seriously, how much did getting a BRZ to Rapa Nui cost?

[srizzors25]

Originally Posted by calidus

I will be really impressed if you haul the BRZ with the bike next time.

The bike probably has just as much torque as the brz shouldn't be too bad

[fika84]

Originally Posted by srizzors25

Took the bike to the track

Is that IMI?

[srizzors25]

Originally Posted by fika84

Is that IMI?

Ha yes it is. Super nice for a quick day, its maybe 30 minutes from my house. Naturally prefer HPR but thats a different deal

[fika84]

Originally Posted by srizzors25

Ha yes it is. Super nice for a quick day, its maybe 30 minutes from my house. Naturally prefer HPR but thats a different deal

Good times! I watched my buddy run off the track into some mud at IMI once in his ZX6. HPR is a blast in the car!

[kberkel]

Originally Posted by 10Stars

Thats a lot of driving. I'm at 4300 since December

Mostly highway.. work pays for the depreciation as well as the gas, so it's not all that bad

[srizzors25]

Originally Posted by fika84

Good times! I watched my buddy run off the track into some mud at IMI once in his ZX6. HPR is a blast in the car!

haha thats fantastic. Thankfully haven't done that yet. Haven't done HPR in a car yet but I've ridden there maybe 4-5 times on a bike and its super fun! Had the opportunity to race the last round at PPIR too, that was actually super fun too, just further away for me

[raven1231]

Originally Posted by kberkel

Tried some smaller pieces, and had a lot more luck.

Im still not perfect on bends.. but I think the size helped. I need to mount the bigger pieces somewhere so I can stretch with two hands. One hand ripples it as I stretch.




Took about 45 minutes a piece, which seemed like forever.

Just reinstalled. Amazing for about $1 worth of material. $5 for 5' on amazon.

install pics?

[kberkel]

Originally Posted by raven1231

install pics?

I'll get some tomorrow. Strangely one of my favorite mods, I think it looks fantastic.

On a side note.. I was supposed to get my oil changed at 22,500. I scheduled it last week, and put on about 500 miles since then. I never know when I have to travel, so it's random.

As I rolled into the dealer.. 22,500



The guy goes.. "Did you drive around the block a few times?"

I bought it in March with 9800 miles

[Pkush]

Originally Posted by Mikko

Best interior mod for under $10.

Where can I get this???

[raven1231]

Originally Posted by kberkel

I'll get some tomorrow. Strangely one of my favorite mods, I think it looks fantastic.

On a side note.. I was supposed to get my oil changed at 22,500. I scheduled it last week, and put on about 500 miles since then. I never know when I have to travel, so it's random.

As I rolled into the dealer.. 22,500



The guy goes.. "Did you drive around the block a few times?"

I bought it in March with 9800 miles

Thanks man! I may end up getting some myself Also that's hilarious lol

[kberkel]

Originally Posted by raven1231

Thanks man! I may end up getting some myself Also that's hilarious lol

For $5.. it's worth messing with
[ame="http://www.amazon.com/gp/product/B007OXCIB0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1"]Amazon.com: 3d Black Carbon Fiber Vinyl Wrap - Outdoor rated for automotive use - 12" x 60 ": Automotive[/ame]


It's like a weak sticker, which was weird to me. I had only worked with "static cling" vinyls.. which usually stretch "just enough" with a good amount of heat.. but with this, just a TINY bit of heat turns it into putty, it just loses all tension. This made it hard since pinching with two fingers, then heating, made the whole section relax and wrinkle, so you have to be quick to drop the heat gun and stretch over the corners with two hands.

One downside as well, is you can't keep peeling and replying a bunch of times, especially around corners. Static cling vinyls will always stick, but eventually the adhesive on this CF wrap started losing its stickiness, so you have to have a plan of attack.

I might make a mini tutorial when I get my other shipment in to do the bigger pieces.

Half the battle is getting the flattest portion on without bubbles (could take like 1 minute). Once that is done, work on the corners, which need most stretch.. then gradually stretch less and less till you reach a straight portion. Just patience after you get it started.

[00NissanNinja]

Originally Posted by srizzors25

Took the bike to the track

That looks like IMI, is it IMI? I miss tracking my bike there so much...That pic in my avatar is me on my 250 at IMI

Installed my new intake: