WHAT DID YOU DO TO YOUR BRZ TODAY?

[Sapphireho]

Originally Posted by Breezio

Yeah, at the Expo. Come on by! It's a much larger then normal turnout this event, so it might be a little hectic, but we are trying to plan things out well enough.

GSR is currently dead. The owner of the land scrapped the road track idea a few months back and is currently building a dirt oval. That could change in the future, but I don't find it likely.

Didn't make it out to Boise over the weekend, but the event was on the channel 9 news this morning. Looked like a good turnout.

[NoHaveMSG]

Originally Posted by Breadman

ive been running headers and a tune on it for years. oil and coolant temps were fine too. i havent looked but im guessing i spun a bearing and it locked up and blew up.i was just cruising the highway, lost power then bang and the back jumped and i clutched in immediately. coasted in neutral up an off ramp and the engine is totally seized and oil ALL over the car except in the pan. i kind of expected this but after i install the supercharger that is arriving tomorrow.

That sucks. This is pushing me to installing a fire system in the car. I was lucky when mine threw a rod, it only lost a little oil.

[Breadman]

Originally Posted by NoHaveMSG

That sucks. This is pushing me to installing a fire system in the car. I was lucky when mine threw a rod, it only lost a little oil.

good think i was crusing at 70mph when it happened and good thing i had thermal coated headers. i didnt even think of a fire but my dipstick is dry. all 5L of oil came out. I really want to see what happened but its been raining. tonight im going to try and drop the skid plate

[NoHaveMSG]

Originally Posted by Breadman

good think i was crusing at 70mph when it happened and good thing i had thermal coated headers. i didnt even think of a fire but my dipstick is dry. all 5L of oil came out. I really want to see what happened but its been raining. tonight im going to try and drop the skid plate

There is a picture on here somewhere of a recent engine bay fire from throwing a rod. That was already in my head after losing an engine on track.

[Breadman]

Originally Posted by NoHaveMSG

There is a picture on here somewhere of a recent engine bay fire from throwing a rod. That was already in my head after losing an engine on track.

i 110% dodged a bullet here. luckily i rolled up and off ramp so all the oil pooling on my skid plat was running off and onto the street. my ace headers are now a nice brown from the oil that did spray on it. also adding an extinguisher to my build list

[LimitedSlip]

Originally Posted by Breadman

i blew my engine cruising on the highway today lol fuck me

How many miles on the odometer?

Has the car been tracked often or at all?

[Breadman]

Originally Posted by LimitedSlip

How many miles on the odometer?

Has the car been tracked often or at all?

37k and yes for the last 3 years. if the engine is anything like my tob and clutch i trashed it

[Breadman]

ups just showed up and i just signed for my supercharger... what timing

[NoHaveMSG]

Originally Posted by Breadman

ups just showed up and i just signed for my supercharger... what timing

Will be a nice center piece on the dinning table till you get the car running again

[Breadman]

Originally Posted by BrahmaBull1990

Whoa. Can a simple header and tune cause that or just bad luck?

Time to rebuilt it AOL style; bigger, faster, stronger.

so i took most of the stuff apart and found a nice hole on the cam covers on one side. so i dropped the pan and its like sifting for gold. took off the oil pick up and found some strands of gasket maker in there.



my theory was avcs failed a retainer or cam then punched a hole and it sprayed all the oil out until the valve hit the piston and killed the engine. this makes sense because i lost power before a bang and the car hopped. also oil sprayed out of my passenger wheelwell. oh yeah they also resealed my heads because they were leaking 600 miles ago. calling the dealer and telling them they are fixing it. i have a blackstone for 800 miles ago and no wear metals

[Breadman]

double post but heres a quick tear down. calling the dealer tomorrow since they resealed my heads less than 600 miles ago

[BrahmaBull1990]

Originally Posted by Breadman

so i took most of the stuff apart and found a nice hole on the cam covers on one side. so i dropped the pan and its like sifting for gold. took off the oil pick up and found some strands of gasket maker in there.



my theory was avcs failed a retainer or cam then punched a hole and it sprayed all the oil out until the valve hit the piston and killed the engine. this makes sense because i lost power before a bang and the car hopped. also oil sprayed out of my passenger wheelwell. oh yeah they also resealed my heads because they were leaking 600 miles ago. calling the dealer and telling them they are fixing it. i have a blackstone for 800 miles ago and no wear metals

That’s crazy you had leaking heads with a 2017. The dealer better pay some of it (or all of it)

[Breadman]

Originally Posted by BrahmaBull1990

That’s crazy you had leaking heads with a 2017. The dealer better pay some of it (or all of it)

they denied the leak for 3 months saying whoever changed my oil spilled it on the pan. then i braked cleaned everything and took it back and it was covered and they said it could be a bunch of things so i tracer dyed it then they tried to say i had a tune so they werent going to cover it and i pointed out it literally had nothing to do with oil.

[GaDgeT]

Installed the Slambert Engineering Hitch and tow pack, loading, transport and life made so much easier..