WHAT DID YOU DO TO YOUR BRZ TODAY?

[tacos]

Originally Posted by kpheez

Installed these last Saturday, just in time for 86fest LOL.

Eibach R1 Coilovers + F&R Sway bars + LCA
Enkei RPF1 on Falken Azenis 255/40/17, btw these wheels does not clear the front Brembo Calipers. 5mm spacer was not enough...needed 8mm

https://www.dropbox.com/home?preview=IMG_1588.JPG
https://www.dropbox.com/home?preview=IMG_1576.JPG
https://www.dropbox.com/home?preview=86fest.jpg

cant view the photos, obv 17x9's, but what offset wouldnt clear?

i want 17x9 but its hard to find information on what fits

[Stang70Fastback]

I removed a lot of brake dust from it!

[15limited]

Originally Posted by Stang70Fastback

I removed a lot of brake dust from it!

😱 HRE's? Very nice

Sent from my 2PQ93 using Tapatalk

[kpheez]

Originally Posted by tacos

cant view the photos, obv 17x9's, but what offset wouldnt clear?

i want 17x9 but its hard to find information on what fits

+35 off set wouldn't clear the fronts on my PP

[OrangeGuitar]

Originally Posted by tacos

cant view the photos, obv 17x9's, but what offset wouldnt clear?



i want 17x9 but its hard to find information on what fits

245/40 clears the strut by a few mm on rota rt5 with +42 offset

[justinco]

Installed a new Blitz NUR-Spec VSR dual exit exhaust. But damn, this thing is super quiet :|

[Extreme86]

Originally Posted by qqzj

Where did you get the sticker near the bottom of the door? Anything similar but not identical?

Also why did you swap the 2017 front bumper? It seems the fog light is gone? Thanks.

PROSTRIPE R76010
Not sure where I got it but, they are still available.

Original front bumper was suffering from serious urban assault / Twisted Sisters road rash and a dime size chunk of plastic was missing on lower part of bumper that was partially hidden by a glob of touch up paint and a generic baysonr lower lip. I've had the car almost 5 years now and normally that's about when I get the urge to trade up but, decided to do a 2.0 on the exterior to update the look, put some more miles on the ODO and wear out the tires a few more times!

The '17 fog light bezel is no longer a perfectly round hole so I guess light fixtures don't stand out like before. They are in there ...OLM combo fog and DRL LED.

[BRZyJ]

Originally Posted by justinco

Installed a new Blitz NUR-Spec VSR dual exit exhaust. But damn, this thing is super quiet :|

That looks pretty sweet.
What's that jack/lift setup you have there?

[Harjotdhanota]

Originally Posted by BRZyJ

That looks pretty sweet.
What's that jack/lift setup you have there?

@justinco made a video about it

[norcalpb]

Retrofitted vanity led lights from a Audi B7 A4.

[LOLS2K]

Originally Posted by Extreme86

I cringe when I see cars parked over those concrete barriers.

[Chris from Cali]

Drove the family to breakfast in the "Silver Bullet" - what my daughter calls it!

[pfaffendorn]

Originally Posted by LOLS2K

I cringe when I see cars parked over those concrete barriers.

Me, too. At least he seems to have cleared that one. I used to hear that gruesome sound regularly, but I finally learned to stop WAY back from the concrete curb, and I mean so I can walk between it and the car. Trust me, your butt won't stick out -- there's still lots of room behind the car. Remember how teensy our cars really are!

[BirdTRD]

Fixed my OBDII port today. Easy fix once you get the OBDII plug out to a place where you can work on it. (unless you're a contortionist with perfect eyesight and patience) Pulled it out thru the opening where the climate controls were mounted. After it was repaired, I hooked up a 3 foot, low profile OBDII extension cable routed over to the passenger side so I don't have to mess with the OEM connection again.