Random Thoughts - Part Deux [NO POLITICS]

[Tcoat]

Originally Posted by Sapphireho

it would be a very tiny clock in a big rim.

That's what....
Nah too easy.

[Ultramaroon]

Originally Posted by Tcoat

That's what....
Nah too easy.

Right? All this talk about shafts is triggering my inner twelve-year-old.

[Tcoat]

Originally Posted by Ultramaroon

Right? All this talk about shafts is triggering my inner twelve-year-old.

Add to that the fact that the hands are to small to do the job and it will push you right over the bend.

[Spuds]

Originally Posted by Sapphireho

No, a 1.5 inch threaded shaft would just give me enough to get thru the center cap. I would still have to bend the arms to clear the rim spokes. To have straight arms I would need about a 3 inch shaft.

I see. Then maybe shaft extensions might be the way to go. Not sure exactly how it's put together but it can't be that difficult.

And yes, I changed the word 'hard' to 'difficult' before posting.

[Sapphireho]

Originally Posted by Ultramaroon

Right? All this talk about shafts is triggering my inner twelve-year-old.

Inner?

[Sapphireho]

Originally Posted by Spuds

I see. Then maybe shaft extensions might be the way to go. Not sure exactly how it's put together but it can't be that difficult.

And yes, I changed the word 'hard' to 'difficult' before posting.

I don't see extending the shafts as being possible. The only option is to have the rim bore made bigger from the backside. There is plenty of material to do it, just need the machine shop, and I don't know anyone these days.

[Sapphireho]

Looking for new things to make this weekend.

[p1l0t]

Originally Posted by Sapphireho

I don't see extending the shafts as being possible. The only option is to have the rim bore made bigger from the backside. There is plenty of material to do it, just need the machine shop, and I don't know anyone these days.

I walked in the wrong part of this conversation...

Sent from my SM-G920P using Tapatalk

[Tcoat]

Originally Posted by Sapphireho

Looking for new things to make this weekend.

So somebody else can't spell the word?

It is a wonder they didn't say halapeeno dip.

https://wordcounter.net/blog/2016/07...horderves.html

[spike021]

Originally Posted by Tcoat

So somebody else can't spell the word?

It is a wonder they didn't say halapeeno dip.

https://wordcounter.net/blog/2016/07...horderves.html

I always wondered why it isn't just "whore's durves".

[Tcoat]

Originally Posted by spike021

I always wondered why it isn't just "whore's durves".

Ho White and the Whore's Dwarves?

[Sapphireho]

Originally Posted by Tcoat

So somebody else can't spell the word?

It is a wonder they didn't say halapeeno dip.

What word? I was just wanting input on new finger foods. You crazy Canadians.

[Sapphireho]

Originally Posted by Tcoat

Ho White and the Whore's Dwarves?

I don't even know how to respond to this one.

[cjd]

Originally Posted by Sapphireho

I don't see extending the shafts as being possible. The only option is to have the rim bore made bigger from the backside. There is plenty of material to do it, just need the machine shop, and I don't know anyone these days.

No drill press? A forstner bit with plenty of lube should be enough to make the hole big enough to fit the whole body in so the short shaft doesn't matter...


...