Aftermarket Seats - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ka-t_240 · 02-13-2016, 12:33 PM

Quote:

Originally Posted by Moto-Phil

You can go with a Corbeau FX1 Wide setup ( I am 6'6" 250) if you're looking to save some money or you can go as far as a Sparco ergo or an EVO 3

Do you have any pics of the setup?

Pekingduck · 02-13-2016, 10:34 PM

I am 6'1 235lbs longer torso I was concern with seat and the helmet to. I installed the recaro spg and nagasi rails and work great. I put it to the lowest setting and I have like 3 inches of head room still.

crazyfrenchbiker · 02-14-2016, 10:38 PM

Quote:

Originally Posted by Moto-Phil

You can go with a Corbeau FX1 Wide setup ( I am 6'6" 250) if you're looking to save some money or you can go as far as a Sparco ergo or an EVO 3

PHIL is my absolute hero.

I just bought the FX1's too, non-wide edition and my fat 275lbs fits... It's a bit snug but as I lose a bit of weight it'll be perfect.

They're really light and I'd venture to say they are better then the FIA/SFI approved Corbeau Forza.

Lorico · 02-16-2016, 12:32 AM

sorry i dont mean to hijack your thread but, will removing one seat disable BOTH front airbags? or just the one associated seat?

Im planning on removing my passenger seat, and it would be great to know. Thanks in advance!

Cop · 02-16-2016, 01:26 PM

Quote:

Originally Posted by Lorico

sorry i dont mean to hijack your thread but, will removing one seat disable BOTH front airbags? or just the one associated seat?

Im planning on removing my passenger seat, and it would be great to know. Thanks in advance!

I believe it's just one airbag but I could be wrong.

Cop · 02-16-2016, 01:28 PM

Running a Recaro Pole Position on a Planted seat base, no sliders. Sits a little bit lower then the OEM seat height but not by much (or at least it doesn't seem like it). Can upload some pictures later.

*edit: for reference, I'm 5'8 and roughly ~150lbs

Fricke · 02-17-2016, 08:56 AM

I am running a Bimarco futura, FIA approved for larger folks, upp to 200cm long and 75-110kg in body weight, it's a little bit large for me

But it fits in the twins whi out any hassle and the price is under 400$ for a 8kg seat.

Cop · 02-23-2016, 02:01 PM

ka-t_240 · 03-20-2016, 04:33 PM

Mtl135i

Mtl135i · 03-20-2016, 07:53 PM

Quote:

Originally Posted by ka-t_240

Mtl135i

Thanks

ka-t_240 · 03-21-2016, 10:21 AM

Quote:

Originally Posted by Mtl135i

Thanks

I've been trying to figure out what I think is the same thing. With the OEM Seat, my helmet is very close to the roof, I would like to find a way to get a tish lower.

brz11b · 09-26-2016, 10:00 PM

Quote:

Originally Posted by Fricke

I am running a Bimarco futura, FIA approved for larger folks, upp to 200cm long and 75-110kg in body weight, it's a little bit large for me

But it fits in the twins whi out any hassle and the price is under 400$ for a 8kg seat.

What mounting hardware did you use to mount the seats? I'm actually looking to get these exact seats for my brz. Can you snap some pics inside the car PLEASE!!??

Fricke · 09-28-2016, 07:52 AM

Quote:

Originally Posted by brz11b

What mounting hardware did you use to mount the seats? I'm actually looking to get these exact seats for my brz. Can you snap some pics inside the car PLEASE!!??

Yes off course, can do that later today.
If I remember correctly I did use side montes that fits sparco, it's the exact same bolt pattern as sparco on this seats.

brz11b · 09-28-2016, 09:58 AM

Quote:

Originally Posted by Fricke

Yes off course, can do that later today.
If I remember correctly I did use side montes that fits sparco, it's the exact same bolt pattern as sparco on this seats.

I was thinking sparco side mounts would work and great i would love to see them in the twins I'm pretty sure these are the seats I'm getting.

Thank you!

02-13-2016, 10:34 PM	#16
Pekingduck Senior Member Join Date: Dec 2011 Drives: 4 wheels Location: Southern Cali Posts: 800 Thanks: 328 Thanked 419 Times in 177 Posts Mentioned: 22 Post(s) Tagged: 3 Thread(s)	I am 6'1 235lbs longer torso I was concern with seat and the helmet to. I installed the recaro spg and nagasi rails and work great. I put it to the lowest setting and I have like 3 inches of head room still. __________________ Pekingduck's Build thread http://www.ft86club.com/forums/showthread.php?t=5717

02-17-2016, 08:56 AM	#21
Fricke Senior Member Join Date: Feb 2014 Drives: Toyota GT86 Location: Sweden/Söderhamn Posts: 144 Thanks: 34 Thanked 90 Times in 39 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I am running a Bimarco futura, FIA approved for larger folks, upp to 200cm long and 75-110kg in body weight, it's a little bit large for me But it fits in the twins whi out any hassle and the price is under 400$ for a 8kg seat. Last edited by Fricke; 02-17-2016 at 10:38 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please post your Aftermarket Seats	Scooby South	Cosmetic Modification (Interior/Exterior/Lighting)	184	10-29-2018 12:29 PM
shop that stocks aftermarket seats?	serial gixxer	Northern California	9	06-02-2015 04:51 PM
Where To Test Aftermarket Seats	itsibarra	Southern California	5	03-31-2015 01:07 AM
DFW Area Aftermarket Seats to Sit in?	nivek111070	Southwest	4	03-17-2015 12:46 PM
Aftermarket Seats sets off SRS light?	Hanakuso	Cosmetic Modification (Interior/Exterior/Lighting)	1	08-25-2012 06:09 PM

02-16-2016, 12:32 AM	#18
Lorico Senior Member Join Date: Feb 2015 Drives: 2015 FRS Location: Ontario Posts: 359 Thanks: 451 Thanked 229 Times in 105 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	sorry i dont mean to hijack your thread but, will removing one seat disable BOTH front airbags? or just the one associated seat? Im planning on removing my passenger seat, and it would be great to know. Thanks in advance!

02-16-2016, 01:28 PM	#20
Cop Senior Member Join Date: Feb 2014 Drives: 2013 FRS Location: Bay Area Posts: 471 Thanks: 262 Thanked 170 Times in 121 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Running a Recaro Pole Position on a Planted seat base, no sliders. Sits a little bit lower then the OEM seat height but not by much (or at least it doesn't seem like it). Can upload some pictures later. *edit: for reference, I'm 5'8 and roughly ~150lbs

02-23-2016, 02:01 PM	#22
Cop Senior Member Join Date: Feb 2014 Drives: 2013 FRS Location: Bay Area Posts: 471 Thanks: 262 Thanked 170 Times in 121 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)

03-20-2016, 04:33 PM	#23
ka-t_240 Senior Member Join Date: May 2014 Drives: BRZ Location: Fargo, ND Posts: 968 Thanks: 124 Thanked 327 Times in 236 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Mtl135i

User Name		Remember Me?
Password