|
Member's Car Journals Car journals by our members. |
|
Thread Tools | Search this Thread |
02-04-2016, 09:59 PM | #1 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Pointmutation's WRB BRZ DDer build...
Guess I should start a journal here...
Interior: - DAMD 86 Vantage leather seat covers, black with red stitching - Raceseng Ashinko shift knob, gunmetal translucent - Raceseng Reverse lockout, blue - Revier blue carbon x black steering wheel - Blue carbon real carbon steering trim replacement panel - Broadway wide angle mirror - 3D Maxpider weather mats - Doraemon head pillow and seat belt padding - Armster 2 armrest - cheap Android 4.4.4 head unit running torque - Revolution Motoring Communications aluminum A/C control covers, blue - STi metal heel plate Exterior: - Grimmspeed license plate relocation kit - Tinted. Pinnacle FormulaOne 35% all around. Also, 90% on the windshield (FYI, 70% VLT is legal in Hawaii now). - STi Bayson R front lip kit, (to be installed) - Side skirts, (to be installed) - Wheels - Sparco Assetto Gara (designed by OZ) 17x7.5 +48 - Tires - Dunlop Direzza ZII star specs - Rally Armor mudflaps Zoom zoom bits: - HKS Hi-power Spec-L cat-back exhaust - HKS dual resonated front pipe - OFT - P&L catted EL header, ceramic coated - P&L overpipe - BBK... RR Racing stage I fronts and rear Sport performance kit. Future mods: Whatever I feel like at the time. Lol. Spoiler/wing (debating on this though since I'm liking the clean trunk look), and more interior stuff... ------- So here's my 2016 WRB BRZ premium. My early mid-life crisis car for me. Bought it as an early xmas present to myself... I was researching a long time for a new car, approximately 2 years. Mainly debating between a new FRS/BRZ, BMW 2series/3series, Merc CLA250, and Mustang. The CLA250 was easily ruled out on the first test drive. BMW was great, technologically perfect, great performance, but a little numb. Mustang is pretty cool but too big for what I was looking for, and mainly all about straight line performance. But the FRS, one drive in the FRS was all it took. Had some reservations about the interior styling and price for what you got. But once behind the wheel and taking the first few corners, all imperfections were forgotten and it was all smiles. Then I saw the WRB BRZ in person and I was sold... essentially an FRS with a mouth guard instead of fangs. Lol. Still on the lot, before she was mine... Took possession at 15mi on the odometer. This is the premium trim. Interior already has blacked out trim pieces by default (except for shifter trim and steering wheel trim).And no spoiler, which means no trunk holes! I can add any spoiler I want without having to worry about covering all the stock spoiler holes. Manual AC controls, which is fine, and reverse camera came stock. Didn't think I'd need it after 20+ years of driving without a reverse cam, but it's great. Makes parking so much easier. Haha. Ordered a few things that first week of ownership... First thing ordered was my Grimmspeed license plate relocation kit. Waiting for my plates to come in to install it. Next thing ordered was my DAMD 86 Vantage leather seat covers and my Raceseng Ashiko shift knob and reverse lockout. The shift knob and r-lock arrived first... The Raceseng knob and r-lock are awesome. Nice quality and feel. Shifting feel totally changed with this knob. Raceseng Ashinko shift knob and Raceseng Reverse lockout The DAMD vantage leather seat covers arrived from Japan next. They're are totally awesome. Worth every penny. Interior is transformed and looks much more upscale yet still sporty. DAMD 86 Vantage leather seat covers, black with red stitching. http://www.ft86club.com/forums/showthread.php?t=100088 Next was to tint my car because Hawaii. Sun all year long and everywhere! Lol. The heat rejection qualities of the tint are like night and day. And coming up next, Operation Blue Carbon... Gonna install my blue carbon steering wheel and blue carbon steering wheel replacement trim next... Blue carbon was something I never saw on a western build but would see in some Japanese builds. Can't wait... Revier blue carbon steering wheel and Blue carbon steering trim replacement panel, installing today... http://www.ft86club.com/forums/showthread.php?t=100923 To be continued... Last edited by Pointmutation; 09-15-2017 at 06:27 PM. |
02-19-2016, 08:21 PM | #2 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Back at 86mi... thought this was a cool shot, 86mi and all (pic taken by passenger).
|
02-19-2016, 08:30 PM | #3 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Revier blue carbon steering wheel and steering wheel trim installed shots...
Love the way the blue carbon reflects in different lighting... From outside... From inside... Great mod. Shipped straight from Japan and nowhere near the price any US shops had for any of the aftermarket steering wheels that retain the factory airbag, especially with any carbon in it. I couldn't even find any US shops that had any blue carbon steering wheel. The only other option US shops had that wasn't black carbon was red carbon. FYI, wayyyyy more color options for everything in Japan. Steering feel is amazing. More thickness and edges make turning much easier and much more fun than it already was. So not only is turning fun in the car, but the tactile feel of the steering wheel in hand is awesome too now. Thread link: http://www.ft86club.com/forums/showthread.php?t=100923 Last edited by Pointmutation; 04-13-2016 at 03:56 PM. |
The Following User Says Thank You to Pointmutation For This Useful Post: | mixtape (04-13-2016) |
02-19-2016, 08:41 PM | #4 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Next up was some head pillows and seat belt shoulder pads for the passenger side. Asian style baby! FYI, I am Asian, lol. Wifey's head is now protected from enthusiastic shifting. Haha. And Doraemon because f'in Doraemon is old school awesome.
|
The Following User Says Thank You to Pointmutation For This Useful Post: | kravi (04-14-2016) |
04-03-2016, 10:06 PM | #5 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Rati Armster 2 installed. A little late in keeping my build updated. Lol. Wanted an armrest and also wanted an enclosed storage space. Enter the Armster 2 armrest. Also able to flip back and out of the way for enthusiastic driving needing critical shifts.
More storage space! Looks good in person. Lost one cup holder space but no drinks allowed in the car anyway. Armster 2 thread link: http://www.ft86club.com/forums/showthread.php?t=102958 |
04-04-2016, 03:00 AM | #6 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
3D Maxpider weather mats installed.
I had an issue though with my shoe/foot placement and these mats. The lip at the edges of the mat, while nice looking, pushed my foot over to the left just enough to make it uncomfortable on my knee when I'm on the gas (normally the edge of my heel is up against the edge of the footwell). So, took a blade to the edge and sliced off that damn edge... Much much better now... We don't have snow where I'm at and no drinks allowed in the car so no need for major liquid puddling/spillage protection from that raised edge. Overall impressions, not bad. Slippery when wet though. Slipped the first time it rained and got into the car. Now I get in more carefully when it rains. Will eventually cut the portion covering the dead pedal. Doesn't snow here so floor mats won't ever get soaked. Rear floor mats are fine but nobody wits back there anyways. Lol. |
04-04-2016, 09:25 AM | #7 |
Airborne at your service
Join Date: Sep 2014
Drives: '17 BRZ Series.Yellow
Location: El Paso, Texas
Posts: 6,370
Thanks: 4,553
Thanked 5,642 Times in 2,958 Posts
Mentioned: 33 Post(s)
Tagged: 2 Thread(s)
|
How do you like those leather seat covers during the summer? Do they get hot and sticky or are they pretty breathable?
__________________
|
04-04-2016, 09:43 AM | #8 |
Senior Member
Join Date: Apr 2014
Drives: 2013 Ultramarine FR-S
Location: Springfield, MO
Posts: 1,950
Thanks: 2,539
Thanked 1,422 Times in 806 Posts
Mentioned: 31 Post(s)
Tagged: 3 Thread(s)
|
I have been looking for a blue carbon steering wheel for awhile. Thanks For the post! Looks good! Look forward to more updates.
__________________
|
04-13-2016, 03:03 PM | #9 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Never had them in summer yet as I just got my car his past winter but in Hawaii weather it's about as hot and breathable as the Wet Okole neoprene seats in my other car. Not sure about sticky as I've never had bare skin against it. Lol.
|
04-13-2016, 03:05 PM | #10 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Thanks dude. Yeah I wish there were more examples of blue carbon stuff, but I guess that just makes having blue carbon accents more rare to have. 👍🏼👍🏼
|
04-13-2016, 03:21 PM | #11 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Joying Android kit kat 4.4.4 head unit installed. Stock bezel fits over it with gaps. I'll be getting a better fitting head unit cover eventually, most likely something carbon fiber. Microphone is temporarily attached in front of the steering wheel. That location seems fine, so I'll just have to route the wires more discreetly. Eventually wired up the head unit for the door speakers. 2016 BRZ harnesses aren't exactly plug and play with this head unit right out of the box and instructions on the forums are pretty confusing as the FRS uses a different workaround from the 2016 BRZ. And as far as I could tell the 2016 BRZ wiring workaround is also different from pre-2016 BRZ's... I used an empty 28-pin harness (harvested from an AX-TOY28SWC adapter I stripped) to connect to my 2016 BRZ's 28pin connector and pinned position 9 with the head unit's amp turn on wire (orange wire labeled amp and coming out of the head unit). Door speakers work fine after that. Debating if I wanna wire in my stock reverse camera. I've noticed I can reverse better and faster without it. Lol. |
04-13-2016, 03:42 PM | #12 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Been looking for some aluminum A/C vent knob covers. Kept coming up with the same pics of knurled grip aluminum covers online but didn't like that knurled grip look. Saw some decent looking ones online but only for the automatic climate control knobs, oh well. Visited Super Autobacs in Japan the other week and came across these Revolution Motoring Communications aluminum covers. Different than what I normally see online, so I had to pick them up. The covers match the blue lighting on the head unit, so that's nice. Head unit's illumination lights are color changeable. I like blue or red in my lights, so blue it is for now. |
The Following User Says Thank You to Pointmutation For This Useful Post: | FTemplar (06-25-2016) |
04-13-2016, 06:37 PM | #13 | |
Banned
Join Date: Feb 2016
Drives: Subaru BRZ
Location: U.K.
Posts: 139
Thanks: 142
Thanked 238 Times in 167 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
|
Quote:
It might be due to yer Dr Martens? Not making a point, just saying. And not really mentioning the bleeding obvious directly. |
|
04-13-2016, 09:42 PM | #14 |
Senior Member
Join Date: Sep 2015
Drives: 2016 ZC6
Location: 808
Posts: 236
Thanks: 119
Thanked 155 Times in 92 Posts
Mentioned: 5 Post(s)
Tagged: 2 Thread(s)
|
Lol. Yeah those wide soles didn't help. But I can't give up my Dr Martens! They're the most durable shoes I've ever bought! It's the only brand I buy now (except for exercise shoes). And Asian style. Lol.
|
The Following User Says Thank You to Pointmutation For This Useful Post: | Norville Rogers (04-14-2016) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Beginner STX Build Whiteout FRS Build Thread | Hachi86Roku | Tracking / Autocross / HPDE / Drifting | 21 | 03-31-2020 07:52 PM |
[B is for Build] BRZ resurrection build | im_topher | Member's Car Journals | 49 | 03-05-2018 09:41 AM |
Superpenguin's "Not Another Build Thread!" Build Thread | superpenguin | Member's Car Journals | 7 | 06-17-2015 04:00 PM |
No build date on passenger side sticker, how to determine build date? | BBYZILA | Scion FR-S / Toyota 86 GT86 General Forum | 5 | 01-20-2015 10:14 PM |
STX build | Evil86 | Tracking / Autocross / HPDE / Drifting | 2 | 01-08-2013 03:40 PM |