transmission rattle

[dholloway543]

The noise is a harsh what sounds like the gears meshing metal on metal sound. Mostly heard holding speed at 3000rpm or on engine breaking decel.


I read a couple places and it seems it might be the nature of unsprung clutches because the engine pulses are put more direct into the trans and also the fact that I have a lightweight flywheel which is less momentum for each pulse.



I'm pretty sure the noise was there before I swapped my exedy stg2 clutch for the os giken counter space garage version clutch kit but I feel the rattle has gotten worse since the installation.


Does anyone else experience this? I'm just trying to find out if it's normal or if I need to take my trans for repair?


https://photos.app.goo.gl/52vc3mTXHc23w1ob7

[Ashikabi]

Originally Posted by dholloway543

The noise is a harsh what sounds like the gears meshing metal on metal sound. Mostly heard holding speed at 3000rpm or on engine breaking decel.


I read a couple places and it seems it might be the nature of unsprung clutches because the engine pulses are put more direct into the trans and also the fact that I have a lightweight flywheel which is less momentum for each pulse.



I'm pretty sure the noise was there before I swapped my exedy stg2 clutch for the os giken counter space garage version clutch kit but I feel the rattle has gotten worse since the installation.


Does anyone else experience this? I'm just trying to find out if it's normal or if I need to take my trans for repair?


https://photos.app.goo.gl/52vc3mTXHc23w1ob7

Don't bother repairing it. Those transmissions are dirt cheap. Just put a used one on it you need to.

Sent from my ONEPLUS A5010 using Tapatalk