follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Forced Induction

Forced Induction Turbo, Supercharger, Methanol, Nitrous


User Tag List
BT, dpfarr

Reply
 
Thread Tools Search this Thread
Old 01-22-2024, 05:47 PM   #4929
Brewster
Member
 
Brewster's Avatar
 
Join Date: Feb 2021
Drives: 13 FRS AT, Edelbrock SC, Tomei EL
Location: Vancouver, B.C.
Posts: 52
Thanks: 37
Thanked 76 Times in 30 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by snowtaipan View Post
Hey all, I've got the old white coolant tank and it's leaking. I think the cap isn't sealing properly, and when I tighten it down fully it pops off. Anyone run into this, or swapped it?

I was looking at the tank from the CTSV, it's 250ml and has a similar plumbing setup, but they're discontinued.

Just curious if anyone had similar issues or found a solution.
https://www.good-win-racing.com/Mazd...t/61-2618.html
__________________
The best thing about the future is that it comes one day (and curve) at a time.
Brewster is offline   Reply With Quote
Old 01-23-2024, 07:39 PM   #4930
snowtaipan
Senior Member
 
snowtaipan's Avatar
 
Join Date: Jun 2017
Drives: '17 BRZ Series Yellow Edelbrock SC
Location: Clarksville, KY
Posts: 100
Thanks: 18
Thanked 23 Times in 18 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Brewster View Post
Isn't that the same one?
snowtaipan is offline   Reply With Quote
Old 01-24-2024, 12:46 AM   #4931
Brewster
Member
 
Brewster's Avatar
 
Join Date: Feb 2021
Drives: 13 FRS AT, Edelbrock SC, Tomei EL
Location: Vancouver, B.C.
Posts: 52
Thanks: 37
Thanked 76 Times in 30 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by snowtaipan View Post
Isn't that the same one?
That's the newer model.
You mentioned "old" so I assumed you had the first smaller model, my apologies.
I believe some members have replaced the cap, but I'm old with a bad memory... a Thread search might provide more useful info.
__________________
The best thing about the future is that it comes one day (and curve) at a time.
Brewster is offline   Reply With Quote
Old 01-24-2024, 12:07 PM   #4932
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 518
Thanks: 202
Thanked 204 Times in 143 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by snowtaipan View Post
Hey all, I've got the old white coolant tank and it's leaking. I think the cap isn't sealing properly, and when I tighten it down fully it pops off. Anyone run into this, or swapped it?

I was looking at the tank from the CTSV, it's 250ml and has a similar plumbing setup, but they're discontinued.

Just curious if anyone had similar issues or found a solution.
I switched from the original tank to the upgraded V2 tank a couple years ago, it has a little more volume and the part number is available online.
__________________
B T is offline   Reply With Quote
Old 03-11-2024, 06:58 PM   #4933
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 518
Thanks: 202
Thanked 204 Times in 143 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Finally did a Dyno check since I wasn't comfortable doing a 140mph run on the street for tuning purposes. Here's what we have for now.
__________________
B T is offline   Reply With Quote
Old 03-11-2024, 10:54 PM   #4934
Uplink
Senior Member
 
Uplink's Avatar
 
Join Date: Dec 2014
Drives: anything you let me
Location: NY
Posts: 469
Thanks: 259
Thanked 241 Times in 167 Posts
Mentioned: 6 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by B T View Post
Finally did a Dyno check since I wasn't comfortable doing a 140mph run on the street for tuning purposes. Here's what we have for now.
Nice run! What did you have to do to get that pull? Are you still running on 93?
Uplink is offline   Reply With Quote
Old 03-12-2024, 04:11 PM   #4935
tomm.brz
Senior Member
 
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,215
Thanks: 504
Thanked 1,080 Times in 783 Posts
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
that can t be 93..
tomm.brz is offline   Reply With Quote
Old 03-13-2024, 09:07 AM   #4936
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 518
Thanks: 202
Thanked 204 Times in 143 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Uplink View Post
Nice run! What did you have to do to get that pull? Are you still running on 93?
nah, it's E85. Both Zach and I were surprised it wasn't more power. IAG closed deck block, 12.2:1 static compression, 2.70 pulley.
__________________
B T is offline   Reply With Quote
The Following 3 Users Say Thank You to B T For This Useful Post:
Brewster (04-06-2024), dpfarr (03-14-2024), SOCON (07-31-2024)
Old 03-14-2024, 02:19 AM   #4937
FrickingReallySlow
Senior Member
 
Join Date: Jun 2021
Drives: 2015 FR-S
Location: San francisco
Posts: 363
Thanks: 151
Thanked 157 Times in 103 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by B T View Post
nah, it's E85. Both Zach and I were surprised it wasn't more power. IAG closed deck block, 12.2:1 static compression, 2.70 pulley.
Thanks for the dyno curves, what's the rationale for closed deck for below 400whp? or are you planning for much in the future
FrickingReallySlow is offline   Reply With Quote
Old 03-14-2024, 03:18 PM   #4938
B T
Senior Member
 
Join Date: May 2015
Drives: 15 BRZ, 2003 MR2, '70 Elky, 06 TBSS
Location: Mobile, Alabama
Posts: 518
Thanks: 202
Thanked 204 Times in 143 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by FrickingReallySlow View Post
Thanks for the dyno curves, what's the rationale for closed deck for below 400whp? or are you planning for much in the future
It was just a future proof investment made when purchasing the block. Less cylinder wobble is always a good thing. It hasn't had any significant effect on coolant temperatures.
__________________
B T is offline   Reply With Quote
Old 03-14-2024, 04:44 PM   #4939
Blanco#17
Junior Member
 
Blanco#17's Avatar
 
Join Date: Jan 2022
Drives: GT86 Blanco Ed #17
Location: UK
Posts: 7
Thanks: 0
Thanked 5 Times in 4 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Hi all,

Finally getting a business trip over to the states.

I have already had to buy one actuator which was blown on arrival and then also got the upgraded #15001 bypass actuator. Import tax and p&p pretty much put an extra 200% on the cost of it. So will be getting another just to sit on the shelf just in case while I am over.

Any one got any recommendations for other parts that would fit in a suitcase that would be worth holding on the shelf?
Blanco#17 is offline   Reply With Quote
Old 03-15-2024, 02:22 AM   #4940
dpfarr
Senior Member
 
Join Date: May 2020
Drives: BRZ ts
Location: SACRAMENTO
Posts: 758
Thanks: 415
Thanked 796 Times in 303 Posts
Mentioned: 8 Post(s)
Tagged: 1 Thread(s)
Bought a South Bend stg 2 clutch, oe flywheel, and a versus fork and pivot. Missing anything?

I wouldn’t want to change the clutch in the first place. Having to pull the blower sucks even more. Does anyone have advice on this? Can I just unbolt it to get access to the slave cylinder or do I just pull it?
dpfarr is offline   Reply With Quote
Old 03-15-2024, 11:46 AM   #4941
Muskoka800
Senior Member
 
Join Date: Jul 2018
Drives: 2016 Scion FRS Release Series 2#439
Location: Chatham, Ontario, Canada
Posts: 726
Thanks: 4
Thanked 157 Times in 130 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by dpfarr View Post
I wouldn’t want to change the clutch in the first place. Having to pull the blower sucks even more. Does anyone have advice on this? Can I just unbolt it to get access to the slave cylinder or do I just pull it?
I was able to unbolt and raise the rear of the blower sufficently (about 1 1/2”) to comfortably service the slave. This without disconnecting the fuel lines or anything else. It might be tough to access the top mounting bolts of the tranny. Good luck!
I also choose a South Bent clutch. The Stage Two Daily. Pedal feel is just like stock. Very satisfied.
__________________
Edelbrock S/C with CSG 94 & 91 maps
TRD Short Shifter, CTS/EvoX Brakes
Ohlin’s R&T Dampers, Hotchkis F/R Bars, Blox LCA & Toe Arms
235F/245R Conti ECS on TRD/Enkei wheels (street),
245/40 sq. ECF on 17x8 720Form GTF2 wheels (track)
Muskoka800 is offline   Reply With Quote
Old 03-15-2024, 01:06 PM   #4942
FrickingReallySlow
Senior Member
 
Join Date: Jun 2021
Drives: 2015 FR-S
Location: San francisco
Posts: 363
Thanks: 151
Thanked 157 Times in 103 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Muskoka800 View Post
I was able to unbolt and raise the rear of the blower sufficently (about 1 1/2”) to comfortably service the slave. This without disconnecting the fuel lines or anything else. It might be tough to access the top mounting bolts of the tranny. Good luck!
I also choose a South Bent clutch. The Stage Two Daily. Pedal feel is just like stock. Very satisfied.
Are you guys using stock pressure plate or something that came from SB
FrickingReallySlow is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vortech Owner Thread & Setup Questions reyruiz191 Forced Induction 340 05-17-2022 01:44 PM
Edelbrock E-Force Supercharger itsibarra Forced Induction 938 07-31-2021 05:48 PM
Most annoyingly over-asked questions on FT86 forums mit_peid Off-Topic Lounge [WARNING: NO POLITICS] 36 01-16-2014 03:48 PM
Brz Info/Specs (helpful info for questions asked often) Gaen BRZ First-Gen (2012+) -- General Topics 0 05-24-2012 11:09 PM


All times are GMT -4. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.