Edelbrock E-force Owner's thread and FAQs (Frequently Asked Questions) - Page 293 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AKITA · 05-10-2021, 11:07 AM

Quote:

Originally Posted by dpfarr

The instructions mention 50:50 coolant. What does that mean? Audi VW coolant? Toyota rated coolant?

it's the same as for the car.. if you are running asian blue.. then you can just run asian red or something so it's a different color which I like as others have mentioned..

AKITA · 05-10-2021, 11:08 AM

Quote:

Originally Posted by dynarun55

Hey guys,
I'm relatively new to the forum. I'm contemplating buying an Edelbrock SC but I'm curious about how the updated bypass valve performs now. I read a lot of threads about how the bypass valve needs to replaced regularly. Has anyone purchased an installed the newer kit with the updated actuator ? This is the only issue that is preventing from pulling the trigger on the purchase.

2nd on the updated 3 bolt valve.. haven't had and issues in the last year with mine.

rixon · 05-14-2021, 09:29 AM

Has anyone received an Edelbrock supercharger kit recently? Their site shows then perpetually out of stock.

Lonewolf · 05-14-2021, 04:40 PM

Quote:

Originally Posted by rixon

Has anyone received an Edelbrock supercharger kit recently? Their site shows then perpetually out of stock.

Try giving them a call and see what the availability is. It could be that they are only by special order now. I know that the pandemic and them leaving CA has disrupted a lot of their business.

CounterSpace Garage · 05-14-2021, 04:55 PM

Quote:

Originally Posted by rixon

Has anyone received an Edelbrock supercharger kit recently? Their site shows then perpetually out of stock.

Quote:

Originally Posted by Lonewolf

Try giving them a call and see what the availability is. It could be that they are only by special order now. I know that the pandemic and them leaving CA has disrupted a lot of their business.

Would be best to just place an order and just wait for it. We recently just had several kits shipped out around the same time. The longer you wait to get in line, the more unknown the ETAs will be.

BrahmaBull1990 · 05-14-2021, 05:47 PM

Quote:

Originally Posted by CounterSpace Garage

Would be best to just place an order and just wait for it. We recently just had several kits shipped out around the same time. The longer you wait to get in line, the more unknown the ETAs will be.

Yeah it’s rough. I somehow scored one off eBay new for MSRP, but I think the company selling it messed up their pricing because they had 4 listed in stock and they are now listing them for $900 above MSRP

mike_b · 05-14-2021, 09:44 PM

Summit has like 4 in stock

Dadhawk · 05-15-2021, 02:52 PM

Quote:

Originally Posted by mike_b

Summit has like 4 in stock

What's odd is when I saw the comment above that is the first place I went because I had seen them there before, and I buy from Summit since they are in Georgia. (Love to go by their storefront and just wander around).

Yet today, you are right they have them listed.

https://www.summitracing.com/parts/e...fr-s/year/2013

mike_b · 05-17-2021, 10:31 AM

Yeah unfortunately it’s the kit with tune.

localhost · 05-19-2021, 09:25 PM

Does anyone know what belt part number I should get for the smaller pulleys? I know the included 99.5" belt is a Continental 4060995, and from the reading I've done (ie CSG Mike's reply to a Reddit post), the 3" pulley should be used with a belt that's 0.75" smaller (ie a Continental 4060987). What I'm not sure about yet is the belt size / part number for the 2.75" pulley.

Also, is there a metric part number for those recommended smaller belts? (My tuner is asking for those)

Pgh_Area · 05-22-2021, 12:11 AM

Quote:

Originally Posted by localhost

Does anyone know what belt part number I should get for the smaller pulleys? I know the included 99.5" belt is a Continental 4060995, and from the reading I've done (ie CSG Mike's reply to a Reddit post), the 3" pulley should be used with a belt that's 0.75" smaller (ie a Continental 4060987). What I'm not sure about yet is the belt size / part number for the 2.75" pulley.

Also, is there a metric part number for those recommended smaller belts? (My tuner is asking for those)

I recently purchased belts, smaller pulley and added tensioner from a forum member.
13/16" x 98-5/8" OC
20mm x 2505mm OC.

Gates
micro-v.
K060980RPM
6PK2491

BirdTRD · 05-22-2021, 09:00 AM

Quote:

Originally Posted by Pgh_Area

I recently purchased belts, smaller pulley and added tensioner from a forum member.

Added...as in 2nd tensioner?

Pgh_Area · 05-22-2021, 03:08 PM

Quote:

Originally Posted by BirdTRD

Added...as in 2nd tensioner?

Yeah. It basically replaces the pulley below and to the right of the SC pulley. It has raised edges on both sides to help prevent slippage.

BirdTRD · 05-23-2021, 05:30 AM

Quote:

Originally Posted by Pgh_Area

Yeah. It basically replaces the pulley below and to the right of the SC pulley. It has raised edges on both sides to help prevent slippage.

You wouldn't happen to have a part # would you?

05-14-2021, 09:29 AM	#4091
rixon Member Join Date: Jun 2020 Drives: Subaru 2020 BRZ Location: USA Posts: 18 Thanks: 0 Thanked 6 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Availibility Has anyone received an Edelbrock supercharger kit recently? Their site shows then perpetually out of stock.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vortech Owner Thread & Setup Questions	reyruiz191	Forced Induction	340	05-17-2022 12:44 PM
Edelbrock E-Force Supercharger	itsibarra	Forced Induction	938	07-31-2021 04:48 PM
Most annoyingly over-asked questions on FT86 forums	mit_peid	Off-Topic Lounge [WARNING: NO POLITICS]	36	01-16-2014 02:48 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) -- General Topics	0	05-24-2012 10:09 PM

05-14-2021, 09:44 PM	#4095
mike_b Member Join Date: Jan 2013 Drives: 18 BRZ Location: Cincinnati Posts: 74 Thanks: 21 Thanked 33 Times in 16 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Summit has like 4 in stock

05-17-2021, 10:31 AM	#4097
mike_b Member Join Date: Jan 2013 Drives: 18 BRZ Location: Cincinnati Posts: 74 Thanks: 21 Thanked 33 Times in 16 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Yeah unfortunately it’s the kit with tune.

05-19-2021, 09:25 PM	#4098
localhost Member Join Date: Jun 2018 Drives: Edelbrock SC 2015 FR-S 6MT Location: Calgary, AB Posts: 67 Thanks: 18 Thanked 25 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Does anyone know what belt part number I should get for the smaller pulleys? I know the included 99.5" belt is a Continental 4060995, and from the reading I've done (ie CSG Mike's reply to a Reddit post), the 3" pulley should be used with a belt that's 0.75" smaller (ie a Continental 4060987). What I'm not sure about yet is the belt size / part number for the 2.75" pulley. Also, is there a metric part number for those recommended smaller belts? (My tuner is asking for those)

User Name		Remember Me?
Password