NW Marketplace Buy/Sell/Trade

[e1_griego]

Anyone have a 2.5" catted front pipe (not stock) they want to sell?

My JDL blew up and it will be a few weeks til they are available according to the phone conversation I had with them.

[NoHaveMSG]

Originally Posted by e1_griego

Anyone have a 2.5" catted front pipe (not stock) they want to sell?

My JDL blew up and it will be a few weeks til they are available according to the phone conversation I had with them.

How bad is blown up? D&W in Sublimity may be able to fix it. I would offer but my tig is down.

[e1_griego]

Just cat guts flopping around. I was going to get the cat replaced but seeing if anyone has something in the mean time.

I have a couple weeks before I have to get it sorted.

edit: I yolo'd a Motiv one from Rallysport. It says they have it in stock.

Anyone want a JDL ultraquiet front pipe that needs the cat replaced? lol

[BrahmaBull1990]

If anyone has a read on where to get some Rays GramLights DR/CR in 18", please let me know. I've been spending days trying to source new and cannot even get someone on the phone or to reply to an email...

all that stimulus money has parts places flooded (according to Vividracing)

[NoHaveMSG]

Originally Posted by BrahmaBull1990

If anyone has a read on where to get some Rays GramLights DR/CR in 18", please let me know. I've been spending days trying to source new and cannot even get someone on the phone or to reply to an email...

all that stimulus money has parts places flooded (according to Vividracing)

Unless you prefer the looks of 18” there is no good reason to run them.


Sent from my iPhone using Tapatalk

[BrahmaBull1990]

Originally Posted by NoHaveMSG

Unless you prefer the looks of 18” there is no good reason to run them.


Sent from my iPhone using Tapatalk

I think you're right...

https://www.ft86club.com/forums/showthread.php?t=144505

I just hopped on this group buy and getting the 17s and saving $600~ over the Rays GramLights

My plan is to run 245/40-17s when my coilovers are installed. Personally I love the wide tire look

[stockysnail]

Originally Posted by BrahmaBull1990

I think you're right...

https://www.ft86club.com/forums/showthread.php?t=144505

I just hopped on this group buy and getting the 17s and saving $600~ over the Rays GramLights

My plan is to run 245/40-17s when my coilovers are installed. Personally I love the wide tire look

245/40-17 are the way to go in my opinion. I've attached a couple pictures of what mine looks like with coilovers. I have XXR 527 17x8.25 et35 which makes the front tires flush and the rears are very close. If I wanted the rear completely flush I'd probably only need a small spacer but I like it how it is. The wheels only cost me $437 new (but that was 2014) and even though they weight a little more at 23lbs, I'm willing to pay less for a heavier wheel as I'm not chasing lap times even if I am on the track, plus I'm not paid to race. I did have to spend an extra $14 for Aluminum hubcentric rings 73.1mm OD to 56.1mm ID however. Those Apex wheels look nice in bronze.

[BrahmaBull1990]

Originally Posted by stockysnail

245/40-17 are the way to go in my opinion. I've attached a couple pictures of what mine looks like with coilovers. I have XXR 527 17x8.25 et35 which makes the front tires flush and the rears are very close. If I wanted the rear completely flush I'd probably only need a small spacer but I like it how it is. The wheels only cost me $437 new (but that was 2014) and even though they weight a little more at 23lbs, I'm willing to pay less for a heavier wheel as I'm not chasing lap times even if I am on the track, plus I'm not paid to race. I did have to spend an extra $14 for Aluminum hubcentric rings 73.1mm OD to 56.1mm ID however. Those Apex wheels look nice in bronze.

Looks so nice! Thank you for the pictures for me to use as reference. The 215 just look so skinny and makes the car look emaciated from the back - I need something beefier. I’m the same; no real plans to track. Maybe one day but I’m not building it for that purpose at this time

The rear diffuser looks fantastic, too!

[Chen]

Originally Posted by BrahmaBull1990

If anyone has a read on where to get some Rays GramLights DR/CR in 18", please let me know. I've been spending days trying to source new and cannot even get someone on the phone or to reply to an email...

all that stimulus money has parts places flooded (according to Vividracing)

Give evasive a call. 5x100 is kind of a pain to get

[BrahmaBull1990]

Originally Posted by Chen

Give evasive a call. 5x100 is kind of a pain to get

Thanks for the heads-up. I just got off the phone with Evasive's sales department and they had next to nothing in 5x100. He said they have people waiting 6-7 months for basic ones

https://www.ft86club.com/forums/showthread.php?t=144510

I just pledged on this group-buy. I've never done one of these and I am trying to figure out if it ships to me in April or if it is ships from overseas and will take a few months to get? (because I am not interested if this is the case haha)

DM'd the OP but haven't heard back yet

[BrahmaBull1990]

Just ordered some new tires to go with my new Apex wheels (once the group buy closes and they can ship).

I’ll be selling my 17” 2020 PP package wheels wrapped in Michelin Pilot Sport A/S 3+ (paid $158/tire new) I’m looking for $600 for all 4 still installed on the PP wheels.

The tires have about 5k and tons of tread left. The wheels have about 6k. I can send pics if anyone is interested. They have never been curbed or anything. I won’t be able to sell them till probably end of April (what Apex is anticipating for delivery dates for the new wheels)

DM me any questions!

[Aztec]

Price change lol

Aluminum Driveshaft willing to part for $200
taking up space in my garage after swapping to a carbonfiber one, WHO WANTS IT!

Originally Posted by Aztec

Gauging interest in a brand new, less than 500 miles Drive Shaft Shop Aluminum Driveshaft?
Looking to get $300 for it.
I literally just paid $425 for it and I ended up not needing it.
It makes the car much more responsive and direct compared to OEM, I just thought my carrier bearing was going out, but it wasn't.


Local preferred, but can ship at buyers expense.

[joods]

Had them on my brz from April 2020 to April 2021 before I sold the car with the stock tail lights. $440. Local pick-up only (Seattle/Bellevue).

I'm not very active on here, so feel free to reach me at 42fivethree2ninenine4fiveseven. Thanks!

[Totemo_Hayai]

Three of us that have SCCA T4 racecars purchased a wrecked BRZ limited for drivetrain spares and body parts as two of the cars were heavily damaged on a trip to Thunderhill. The car we purchased happens to be a BRZ Limited which has keyless ignition, push button start, and auto climate control. It also has a center console with heated seat switches.



All of these systems are available for purchase together for $500. Buyer must extract the parts they desire from the car within the next 1.5 weeks before the car is sent to be recycled. Car is located in Snohomish, WA



It looks like people have spent over $1000 to gather parts for just auto climate control so this is a great deal for someone that wants to upgrade a standard FRS.