|
Other Vehicles & General Automotive Discussions Discuss all other cars and automotive news here. |
|
Thread Tools | Search this Thread |
12-29-2015, 03:46 PM | #15 |
Senior Member
Join Date: Aug 2014
Drives: '14 981CS, '99 NB1
Location: Oregon
Posts: 1,274
Thanks: 1,234
Thanked 1,201 Times in 631 Posts
Mentioned: 114 Post(s)
Tagged: 2 Thread(s)
|
I use only Dewalt 20V Max stuff, the batteries are all interchangeable and there are different amp hour ratings on them so you can get higher capacity. The line is pretty expansive so it's a good long term investment if you want other things. I have a 1/2" chuck standard drill, 1/4" bit impact driver, and a 1/2" drive XR impact wrench. They are all amazing tools.
I've had some Ryobi stuff in the past, tool worked well, but batteries were very flakey over time. Replacing the batteries is almost as expensive as buying a new drill. |
12-29-2015, 05:14 PM | #16 |
That Guy
Join Date: Dec 2011
Drives: 2013 asphalt FRS MT
Location: Halifax, Nova Scotia
Posts: 4,865
Thanks: 5,058
Thanked 2,867 Times in 1,499 Posts
Mentioned: 82 Post(s)
Tagged: 1 Thread(s)
|
This is an argument that will never be over, Dewalt or Makita... Just get which ever is cheaper. Both of those brands will lasts many years for a diyer.
I've got a Makita set, including a drill, impact driver, and flashlight, because it was on sale at costco. I've had it for about 5 years and everything still works like the day I bought it. That doesn't mean a Dewalt wouldn't do the same. |
12-29-2015, 05:26 PM | #17 |
Senior Member
Join Date: Aug 2014
Drives: 2013 FR-S
Location: Northwest Iowa
Posts: 7,354
Thanks: 454
Thanked 4,542 Times in 2,947 Posts
Mentioned: 59 Post(s)
Tagged: 5 Thread(s)
|
Have you considered a manual drill over an automatic?
|
The Following 2 Users Say Thank You to Ashikabi For This Useful Post: | cdq85 (12-31-2015), Impureclient (12-29-2015) |
12-30-2015, 02:18 AM | #18 | |
Senior Member
Join Date: Jul 2014
Drives: 2020 Hakone
Location: London, Ont
Posts: 69,845
Thanks: 61,656
Thanked 108,283 Times in 46,456 Posts
Mentioned: 2494 Post(s)
Tagged: 50 Thread(s)
|
Quote:
__________________
Racecar spelled backwards is Racecar, because Racecar.
|
|
The Following 2 Users Say Thank You to Tcoat For This Useful Post: | Calum (12-30-2015), Ultramaroon (12-30-2015) |
12-30-2015, 10:10 AM | #19 |
Senior Member
Join Date: Jul 2014
Drives: 2015 WRB BRZ Premium
Location: Atlanta, GA
Posts: 114
Thanks: 37
Thanked 58 Times in 39 Posts
Mentioned: 3 Post(s)
Tagged: 2 Thread(s)
|
Hilti is by far the best cordless drill I have ever used. But, they are easily 4x the price of any other brand. They leased them at my old job.
That said, for home use they are way overkill. I have used DeWalt for the past decade or so with virtually no issue. I just bought a new 20V a month ago to replace my 10yr old 18V. I've abused the hell out of them and they keep going. Makita is also a good bet, I wouldn't hesitate to buy one of those if the deal was right.
__________________
2015 WRB BRZ - Nameless - Raceseng - Eibach - Whiteline - Cusco - Perrin
|
12-30-2015, 10:21 AM | #20 |
Senior Member
Join Date: Aug 2014
Drives: 2013 FR-S
Location: Northwest Iowa
Posts: 7,354
Thanks: 454
Thanked 4,542 Times in 2,947 Posts
Mentioned: 59 Post(s)
Tagged: 5 Thread(s)
|
So I looked into Rigid last night. Every one on google says the warranty is a joke. Looked up it specifically and it doesn't cover wear and tear, only manufacturer defect. So if your drill goes out in 2 years they can just say it wore out, instead of being defective. Take this info however you want but apparently some research needs done on warranties before you purchase
|
12-30-2015, 01:19 PM | #21 |
Member
Join Date: Dec 2015
Drives: 2013 FRS
Location: Winter Wonderland
Posts: 46
Thanks: 38
Thanked 16 Times in 12 Posts
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
|
i've had my makita since 08', dropped and beaten to hell, but still works awesome....i've also used it for small car jobs (taking wheels off, strut bolts, etc) and its done it pretty well....for the last few months or so, i've been using it more around the house.
|
12-30-2015, 02:08 PM | #22 |
Member
Join Date: Jun 2015
Drives: 2013 BRZ Limited DGM 6MT
Location: Baltimore
Posts: 38
Thanks: 14
Thanked 17 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Got a Dewalt 18v XRP drill DC988 12 years ago, beat it to hell and the clutch/torque plate finally went out so I rebuilt it rather than buy a new POS. There are $139 dewalt drills but stay away if you want longevity, @NWFRS said it best, Lithium ion and brushless motor will get you a drill that will last and will allow you to repair it, not just replace.
|
The Following 2 Users Say Thank You to CandorLush For This Useful Post: | NWFRS (12-31-2015), Ultramaroon (12-30-2015) |
12-31-2015, 10:22 AM | #23 | ||
Banned
Join Date: May 2015
Drives: 2015 FR-S
Location: NPR, Florida
Posts: 2,404
Thanks: 1,802
Thanked 2,903 Times in 1,282 Posts
Mentioned: 25 Post(s)
Tagged: 2 Thread(s)
|
Quote:
Quote:
Nickosport mentioned Hilti. They have a warranty that claims "lifetime with wear and tear". If Ridgid ever gives me a problem I guess I may have to start getting Hilti products. |
||
12-31-2015, 11:26 AM | #24 |
Senior Member
Join Date: May 2014
Drives: '06 Cayman, ‘23 BRZ Sport-Tech
Location: The other cottage country…
Posts: 586
Thanks: 123
Thanked 517 Times in 288 Posts
Mentioned: 4 Post(s)
Tagged: 2 Thread(s)
|
My 2¢...
First, figure out what you want to do with the tool. Drilling the occasional hole and installing a few drywall screws around the house? Building and installing kitchen cabinets? Building houses or installing plumbing? Setting climbing anchors on El Capitan? That will tell you what size (voltage, capacity, etc) and general beefiness of the tool you want. I buy a lot of tools. Kind of an addiction of mine. My wife has a Ryobi 12V screwgun that works great for little jobs around the house, weighs nothing, fits in a drawer in the kitchen and fits her hand but it doesn't have the torque to drive a 3/4" bit through a 2x4 stud. I have a 12V Li drill and impact driver set at the cottage that are great for everyday use, cabinet making, etc, but I wouldn't expect them to last too long if I were using them for rough ins all day. I also have a 20V Li drill and impact driver set that can do just about everything, but they are a bit heavy and chunky for small jobs or tight spaces. 14.4 V Li might be the sweet spot, but there aren't many around. Incidentally, impact drivers are awesome and capable of driving fasteners much larger than the equivalent drill/driver. I.e., a 12V drill/impact driver set is much more capable than just a 12V drill alone. As far as brand goes, I'll echo the wise and wonderful Tcoat. Many of them come out of the same factory (e.g. DeWalt owns Porter Cable) and none of them are made of materials as robust as tools were back in the day (molded plastic vs cast aluminum). That said, the top line tools used by pros are very well designed these days. So, if you just want to be able to drill a hole to mount a picture, buy any tool that you like the feel of. If you want a "do nearly anything" tool for around the house use, get a mid-size (12-14.4V Li) drill and impact driver combo. If you build houses for a living, you're posting this question on the wrong forum. Bet you wish you never asked...
__________________
Anything worth doing is worth doing twice...
|
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Recommendation for Cordless Impact Wrench? | iLaw | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 35 | 04-27-2017 10:51 PM |
FS: Snap-on 1/2" cordless impact wrench & driver | vc86 | Mechanical Maintenance and Tools | 1 | 08-04-2014 04:40 PM |
Anyone else Invest? | supra2nv | Off-Topic Lounge [WARNING: NO POLITICS] | 104 | 07-01-2013 10:19 AM |
Toronto FR-S orders- Drill or no Drill on bumper | Dragon86 | CANADA | 35 | 10-12-2012 01:35 PM |