WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1359 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JD001 · 04-02-2021, 07:53 AM

As was promised, I got the car taxed yesterday, pumped up the tyres and took it out for a drive.. this after 3 months of zero activity..

Breezio · 04-05-2021, 08:40 AM

Quote:

Originally Posted by bart2ooo

Is that the HKS Spec L2 Exhaust i see?

Yeah, HKS Hi-Power Spec-L
I love it, sounds great and very light for a stainless dual exit.

bart2ooo · 04-05-2021, 12:12 PM

Quote:

Originally Posted by Breezio

Yeah, HKS Hi-Power Spec-L
I love it, sounds great and very light for a stainless dual exit.

Anything else done to the exhaust setup? I'm thinking about getting the Spec-L once i get my Tomei UEL but i'm not sure how loud it'll be as far as cold starts and neighbors lol

Breezio · 04-05-2021, 10:29 PM

Quote:

Originally Posted by bart2ooo

Anything else done to the exhaust setup? I'm thinking about getting the Spec-L once i get my Tomei UEL but i'm not sure how loud it'll be as far as cold starts and neighbors lol

It should be fine if you keep oem over pipe and front pipe.
I have the old OpenFlash UEL catless header, oem over pipe and front pipe. It's not too loud. My tune does have a reduced cold start idle so I can't speak for that particular portion.
Here is what she sounds like at full tilt, microphone is attached at the rear license plate.

BrahmaBull1990 · 04-05-2021, 11:21 PM

Quote:

Originally Posted by Breezio

It should be fine if you keep oem over pipe and front pipe.
I have the old OpenFlash UEL catless header, oem over pipe and front pipe. It's not too loud. My tune does have a reduced cold start idle so I can't speak for that particular portion.
Here is what she sounds like at full tilt, microphone is attached at the rear license plate.

Nice run, man! Had a little happy dance goin’ there at the end

Breezio · 04-06-2021, 12:58 AM

Quote:

Originally Posted by BrahmaBull1990

Nice run, man! Had a little happy dance goin’ there at the end

Thanks! Yeah, that run just barely edged me into 3rd PAX out of 75ish drivers, many of which are very talented and very fast. Plus the car felt great all day with real nice controllable mid-corner on throttle rotation.

wolffbite · 04-06-2021, 12:43 PM

Over the course of this weekend...

Swapped back to summer wheels.
Installed OEM Side window visors (P/N: 0816218810)
Full interior & exterior detail.
Waxed with Soft99 Fusso Coat 12 months Dark.
Carpro Flyby Forte to all glass.
Carpro DLUX to all trim & wheels.

bart2ooo · 04-06-2021, 06:22 PM

Quote:

Originally Posted by Breezio

It should be fine if you keep oem over pipe and front pipe.
I have the old OpenFlash UEL catless header, oem over pipe and front pipe. It's not too loud. My tune does have a reduced cold start idle so I can't speak for that particular portion.
Here is what she sounds like at full tilt, microphone is attached at the rear license plate.

Car sounds awesome! And sick run man!

Mtl135i · 04-07-2021, 08:03 PM

Out for the summer 😁

BrahmaBull1990 · 04-07-2021, 10:28 PM

Not my car but such an EPIC V8 swap on a twin...I’m shocked tbh

gen3v8 · 04-08-2021, 12:33 AM

Changed the gearbox and dif oils

therealstoly · 04-08-2021, 09:09 PM

Manicci mats and new sills/scuffs from Subispeed.

Not 100% sure how I feel about the Aero Fins...

Renegade Motorsports cap kit to rid the bay of all the yellow caps, APR shroud, and some Cusco fanboi bits and pieces.

Swapped the Sachs/Eibach out with the CSG Tein FLA kit. Also installed the ARP OEM length studs. CSGs come with very little, if any, adjustments needed. I did two rounds of minute tweaking at each corner based on my weight etc. and had Street Automotive in Reno take over for the final fine tuning of camber/caster/et al and alignment.

spike021 · 04-09-2021, 01:46 PM

Yesterday got the car back from the shop.

Had:

* TOB and clutch fork replaced with new 2017+ TOB, Verus fork/pivot
* Jackson Racing combo oil cooler/radiator

Can't wait to see how everything feels and works!

wolffbite · 04-09-2021, 02:17 PM

Quote:

Originally Posted by spike021

Yesterday got the car back from the shop.

Had:

* TOB and clutch fork replaced with new 2017+ TOB, Verus fork/pivot
* Jackson Racing combo oil cooler/radiator

Can't wait to see how everything feels and works!

How many miles on your TOB before it crapped out?

04-07-2021, 08:03 PM	#19021
Mtl135i Member Join Date: Aug 2013 Drives: BMW 135i Location: Montreal Posts: 57 Thanks: 35 Thanked 56 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Out for the summer 😁 Attached Images

04-07-2021, 10:28 PM	#19022
BrahmaBull1990 Howdy Join Date: Feb 2021 Drives: 2020 BRZ PP Location: Snohomish, WA Posts: 589 Thanks: 1,271 Thanked 446 Times in 248 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Not my car but such an EPIC V8 swap on a twin...I’m shocked tbh __________________ There's a point at 7,000 RPM... where everything fades. The machine becomes weightless. Just disappears. And all that's left is a body moving through space and time. 7,000 RPM. That's where you meet it. You feel it coming. It creeps up on you, close in your ear. Asks you a question. The only question that matters. Who are you?

04-08-2021, 12:33 AM	#19023
gen3v8 Barred Join Date: Oct 2020 Drives: My18 wrxsti My19 brzts Location: Botany Bay Posts: 1,144 Thanks: 730 Thanked 1,187 Times in 610 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Changed the gearbox and dif oils Attached Images __________________ Wait until my Flex capacitor hits 88

04-08-2021, 09:09 PM	#19024
therealstoly Senior Member Join Date: Oct 2020 Drives: 2020 BRZ Limited Location: Reno Posts: 112 Thanks: 214 Thanked 222 Times in 75 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Manicci mats and new sills/scuffs from Subispeed. Not 100% sure how I feel about the Aero Fins... Renegade Motorsports cap kit to rid the bay of all the yellow caps, APR shroud, and some Cusco fanboi bits and pieces. Swapped the Sachs/Eibach out with the CSG Tein FLA kit. Also installed the ARP OEM length studs. CSGs come with very little, if any, adjustments needed. I did two rounds of minute tweaking at each corner based on my weight etc. and had Street Automotive in Reno take over for the final fine tuning of camber/caster/et al and alignment. Last edited by therealstoly; 04-09-2021 at 12:00 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) -- General Topics	8	03-31-2012 08:53 AM

04-02-2021, 07:53 AM	#19013
JD001 Senior Member Join Date: Apr 2015 Drives: Subaru BRZ Location: UK Posts: 6,028 Thanks: 7,652 Thanked 6,187 Times in 3,474 Posts Mentioned: 25 Post(s) Tagged: 2 Thread(s)	As was promised, I got the car taxed yesterday, pumped up the tyres and took it out for a drive.. this after 3 months of zero activity..

04-06-2021, 12:43 PM	#19019
wolffbite Just the tip Join Date: Mar 2017 Drives: 2017 DGM BRZ Location: BC, CANADA Posts: 630 Thanks: 912 Thanked 875 Times in 376 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Over the course of this weekend... Swapped back to summer wheels. Installed OEM Side window visors (P/N: 0816218810) Full interior & exterior detail. Waxed with Soft99 Fusso Coat 12 months Dark. Carpro Flyby Forte to all glass. Carpro DLUX to all trim & wheels.

User Name		Remember Me?
Password