Tristate Area F/S F/T thread

[Ernest72]

Originally Posted by Ernest72

I have a used set of bronze sparco assetta gara wheels. 17 x 7.5. $400.+48 offset

PM me for pics.

[zc06_kisstherain]

selling my Ares Bleeder kit i bought

I used only once without filling brake fluid inside
I just used giving pressure to bleed out so i dont have to clean out container.

I paid over $100+ including adapter.
50.7 mm for twin and Honda/Acura adapters included

$70 pick up for everything in Northvale NJ

[Vides990]

Brand new parts, never installed:
Subaru OEM JDM LED DRL Lamps - $375 Shipped
Perrin Intake Inlet Hose 2017-2020 Version - $75 Shipped

OEM STI Cherry Red Mirror Covers - Not Brand New, But Appear Brand New, used for a short period of time, 0 damage/marks, covered with PPF - $150 Shipped


I have some other things laying around like a 3" nameless catback and OEM JDM Underpanels for pre 2016 cars that didn't have them come stock.

Feel free to PM

Pictures here:
https://www.ft86club.com/forums/showthread.php?t=150945

Found a set of 2013-2016 taillights, no damage, never leaked. $50

[LancePower]

SOLD

For Sale:
SACHS dampers (two front struts, two rear shocks)
Off a 2020 BRZ tS
7,000 miles (were paired with Eibach Pro Kit springs)
Speed shop indicated all four appear good
$100 obo

[spcmafia]

Originally Posted by LancePower

For Sale:
SACHS dampers (two front struts, two rear shocks)
Off a 2020 BRZ tS
7,000 miles (were paired with Eibach Pro Kit springs)
Speed shop indicated all four appear good
$100 obo

Hey man, seems like a fair deal. What are something I would notice, having an 18 BRZ if I was to get these. I believe the Ts shocks are a bit different. How much is the drop with the E.P.K springs? Would I need anything else in order to fit them? Bushings, alignment,etc?

[LancePower]

Originally Posted by spcmafia

Hey man, seems like a fair deal. What are something I would notice, having an 18 BRZ if I was to get these. I believe the Ts shocks are a bit different. How much is the drop with the E.P.K springs? Would I need anything else in order to fit them? Bushings, alignment,etc?

Ts shocks are valved slightling different to match the STi Pink springs that came on the tS.

The Pro Kit advertises a 1" drop and that is pretty much what I got. I don't think these affect ride height either way, like the B6's can.

Should not need any additional hardware for install.

Alignment is always a good idea after suspension work. But may not be neccesary if you aren't changing ride height.

[spcmafia]

Originally Posted by LancePower

Ts shocks are valved slightling different to match the STi Pink springs that came on the tS.

The Pro Kit advertises a 1" drop and that is pretty much what I got. I don't think these affect ride height either way, like the B6's can.

Should not need any additional hardware for install.

Alignment is always a good idea after suspension work. But may not be neccesary if you aren't changing ride height.

Im looking for a 1 inch drop all around, and from some research this seems like an OEM+ upgrade. Willing to ship? 06379

[LancePower]

Originally Posted by spcmafia

Im looking for a 1 inch drop all around, and from some research this seems like an OEM+ upgrade. Willing to ship? 06379

I am going to hold out for a local buyer for now.

Shipping will probably run between $30-50.

You'd be better off just planning a trip down to Philly or DC and stopping on the way.

[Ernest72]

I need some parts for my Cayman. Need to sell some subies parts

1. Invidia Q300.SOLD.

2. Sparco assetto gara wheels bronze 17x17.5 et 48. One wheel has a scratch. Asking $400 obo

3. Perrin intake hose grey with clamps and inserts. $50 obo

Local only.

[NFS86]

Selling for pick up in 07003 or local meet up only.
Full titanium Top Speed Pro 1 catback. You will need new gaskets. Has a scrape as shown in pic but no leaks. $800 OBO.

DC Sport front Strut Bar. No hardware $30

Brand new oem rear crash bar $50

Also for sale but not pictured, 2017 OEM axleback $50

[waterpanda]

Selling a HKS Hi-Power V2 exhaust system for 86/BRZ/FRS - $300

Muffler hanger bushing broke so the tip got some plastic melted on but easily removed and polishable.

Besides the tip, the exhaust is in great condition, no scrapes or dings.

In Englewood NJ

[Breadman]

Originally Posted by waterpanda

Selling a HKS Hi-Power V2 exhaust system for 86/BRZ/FRS - $300

Muffler hanger bushing broke so the tip got some plastic melted on but easily removed and polishable.

Besides the tip, the exhaust is in great condition, no scrapes or dings.

In Englewood NJ

I have the same exhaust and whoever gets it should get some of that heat tape and put it on the bumper cover. Worked for me and I also recommend the exhaust sounds much better than my other setups

[scion fr-s]

Looking to sell some parts. Nothing is wrong with them. It is taking up space.

$ 70 OEM 18MM Sway Bar w/ Endlinks
$ 10 OEM AC Vents (Silver)
$ 10 OEM Steering Wheel Trim (Silver)
$ 25 OEM Door Sills

My loss is your gain. Will ship at buyer's request. Buyer pays for shipping. Thanks for reading / looking.

[Figo]

XXR 527 Chrome Black 17x8.25 +25 Square

225/45R17 Michelin X-Ice Xi3

Lots of tread left. Fit both 5X100 and 5X114.3. Can clear STI Brembo Calipers.

These rims have +25 offset, so please check whether they fit.

They fit perfectly on your vehicle if you have 18X9.5 +40 & 265(255)/35R18 square summer setup.

$700 Cash Only. Pick up Only. Wheels at Cliffside Park, NJ.