follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Software Tuning

Software Tuning Discuss all software tuning topics.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 04-18-2020, 06:06 PM   #1205
steve99
Banned
 
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by rx3 View Post
I should add that when I initally tested it after adding intercooler and cat-back, it was ok. (Well apart from some ignition correction).

But after a while it occasionally started to bog abruptly (due to closing of the throttle), which it meanwhile does all the time at WOT.
For whatever reason, the WG Duty goes to 100% immediately and then the throttle closes (screen shots attached). Maybe it is also some sort of a defective contact? I don't think it is a mechanical issue otherwise it would have done it all the time - besides, the software appears to be giving a false command anyway.
Any ideas?

Closing the throttle to about 20% is ecutek inbuilt overboost protection in Radeon 10 and above.


I'd check you MAP sensor is ok, then can fail and read incorrect boost levels.


Also your waste gate actuator may be stuck or the boost line leaking or blocked
steve99 is offline   Reply With Quote
Old 04-21-2020, 02:43 PM   #1206
DeliciousTuning
PhoneFlash by EcuTeK
 
DeliciousTuning's Avatar
 
Join Date: Dec 2012
Drives: Edelbrock Equipped - Subaru BRZ
Location: San Diego, CA
Posts: 1,608
Thanks: 309
Thanked 1,682 Times in 581 Posts
Mentioned: 403 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by Eazy-V View Post
I already have another flex fuel/sensor kit on my FI FRS, so will that work with your flex fuel tunes?
Yes our tunes will work with out Flex Fuel Kits. We just need to know which one so we can scale the sensor accordingly.
DeliciousTuning is offline   Reply With Quote
Old 04-21-2020, 08:02 PM   #1207
Eazy-V
Senior Member
 
Join Date: Mar 2013
Drives: 2013 Scion FR-S Whiteout
Location: Vancouver, BC
Posts: 137
Thanks: 9
Thanked 6 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by DeliciousTuning View Post
Yes our tunes will work with out Flex Fuel Kits. We just need to know which one so we can scale the sensor accordingly.
I have the Full Blown Motorsports FlexFuel kit which has the Zeitronix controller, so would you need more specific info?

Also, what version RaceROM do you use on your tunes?
__________________
FBM Base Turbo Kit with GTX2867R and FlexFuel Kit with Walbro 485 / 550cc Injectors
EcuTek Tuned witih Greddy Profec @ 12PSI Shell 91-E73 and 18PSI E73

1993 Mazda MX6 N/A Fully Built on MegaSquirt (work in progress)
2023 Chevrolet Corvette Z51 Stock
Eazy-V is offline   Reply With Quote
Old 09-02-2020, 06:45 PM   #1208
DeliciousTuning
PhoneFlash by EcuTeK
 
DeliciousTuning's Avatar
 
Join Date: Dec 2012
Drives: Edelbrock Equipped - Subaru BRZ
Location: San Diego, CA
Posts: 1,608
Thanks: 309
Thanked 1,682 Times in 581 Posts
Mentioned: 403 Post(s)
Tagged: 1 Thread(s)
Hi All,

We just released a new update, version 31.50.

In this release we have updated the following.
1. Drivability down low between 2000-4000 RPM.
2. More LSPI updates down low, helps a fair amount of vehicles.
3. Better AFR closed loop control under WOT.
4. Better tip in performance
5. Better boost ramp in at low RPM's.
6. Improved Traction Control (optional upgrade) for cars even with 700+ hp
7. Improved AFR's for 17+ ECU's, since the control is a bit different
8. Flex Fuel blending improved, not just a linear adjustment.

Regards,
William Knose
Delicious Tuning
DeliciousTuning is offline   Reply With Quote
Old 10-12-2021, 09:23 PM   #1209
Calum
That Guy
 
Join Date: Dec 2011
Drives: 2013 asphalt FRS MT
Location: Halifax, Nova Scotia
Posts: 4,865
Thanks: 5,058
Thanked 2,867 Times in 1,499 Posts
Mentioned: 82 Post(s)
Tagged: 1 Thread(s)
Not sure if you're even still active here but I thought I'd check.

My last tune was in 2016. No major changes to the car but I'm wondering what changes you've made to the tune since then.

Mods are an ACE CS400 header, high flow cat in the front pipe, and that's about it. I might still have an aftermarket air filter, but I can't remember.
Calum is offline   Reply With Quote
Old 10-10-2022, 02:45 PM   #1210
DeliciousTuning
PhoneFlash by EcuTeK
 
DeliciousTuning's Avatar
 
Join Date: Dec 2012
Drives: Edelbrock Equipped - Subaru BRZ
Location: San Diego, CA
Posts: 1,608
Thanks: 309
Thanked 1,682 Times in 581 Posts
Mentioned: 403 Post(s)
Tagged: 1 Thread(s)
New updates on our Stage 1 and Stage 2 tunes:

Latest revisions offered by Delicious Tuning:

Stage 1 Reflash (91,92,93, 94 octane, 95,98 RON, E85 and FlexFuel)): New Version 18.50
- Stock header manifold
- Stock intake manifold 13-16 or 17-20
- Stock intake or your choice of intake (does not matter)
- Stock or aftermarket exhaust system.
- More details, click here

Stage 2 Reflash (91,92,93, 94 octane, 95,98 RON, E85 and FlexFuel): New Version 18.50
- Designed to accommodate your preferred choice of header.
- Revised intake, exhaust, timing, ignition advance, fueling, DI and PI maps
- More details, click here
DeliciousTuning is offline   Reply With Quote
Old 10-18-2022, 01:57 PM   #1211
nick.cfrancis
Member
 
Join Date: Jun 2017
Drives: 2017 Subaru BRZ Limited Performance
Location: USA
Posts: 25
Thanks: 0
Thanked 6 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by DeliciousTuning View Post
New updates on our Stage 1 and Stage 2 tunes:

Latest revisions offered by Delicious Tuning:

Stage 1 Reflash (91,92,93, 94 octane, 95,98 RON, E85 and FlexFuel)): New Version 18.50
- Stock header manifold
- Stock intake manifold 13-16 or 17-20
- Stock intake or your choice of intake (does not matter)
- Stock or aftermarket exhaust system.
- More details, click here

Stage 2 Reflash (91,92,93, 94 octane, 95,98 RON, E85 and FlexFuel): New Version 18.50
- Designed to accommodate your preferred choice of header.
- Revised intake, exhaust, timing, ignition advance, fueling, DI and PI maps
- More details, click here
The "click here" links are not active on your post.
nick.cfrancis is offline   Reply With Quote
Old 02-27-2023, 06:05 PM   #1212
DeliciousTuning
PhoneFlash by EcuTeK
 
DeliciousTuning's Avatar
 
Join Date: Dec 2012
Drives: Edelbrock Equipped - Subaru BRZ
Location: San Diego, CA
Posts: 1,608
Thanks: 309
Thanked 1,682 Times in 581 Posts
Mentioned: 403 Post(s)
Tagged: 1 Thread(s)
We have some updates to our Stage 1, Stage 2, Flash & Go and All FI application tunes. The Stage 1 & Stage 2 required some small changes are to the idle control and startup conditions on speed density and some work is still in progress (below), so we will retain the same enumeration on the naturally aspirated applications. Where as the Flash & Go tunes have made quite a few changes (see list below) to our latest version which will also include, Edelbrock, Harrop, Innovate, and Jackson supercharger kits.

We seem to have found a small bug within the latest (and previous versions), while on speed density only, that in certain conditions (warm engine) on some 86's (does not affect all vehicles), the vehicle will start and die. This is something we have been reviewing with EcuTek and a few cars that have the issue. Otherwise the idle control should be a bit more stable now when running 100% Speed Density, with a lot less likely chance of receiving a high idle code as in previous versions of the tune.

Latest revisions offered by Delicious Tuning:

Stage 1 Reflash: New Version 18.50
- 100% Speed Density (any intake works)
- Stock header manifold
- Stock intake manifold 13-16 or 17-20
- Stock or aftermarket exhaust system.
- More details, click here

Stage 2 Reflash: Version 18.50
- 100% Speed Density (any intake works)
- Designed to accommodate your preferred choice of header.
- Revised intake, exhaust, timing, ignition advance, fueling, DI and PI maps
- More details, click here

Flash & Go (all forced induction applications) Version 33.50
- 100% Speed Density Enabled
- Low speed acceleration from a dead stop.
- Low speed stock throttle, with Race Throttle or higher speeds.
- Improved Direct (mid RPM range) and Port Angle injection (low speeds)
- Improved CAM Angles (better top end power)
- Better tip in response for Speed Density
- Improved off throttle burble (add-on)
- Improved Flex Fuel (Ethanol) performance output
- Improved Idle Control for more applications
- Improved Mid Throttle / Mid RPM response and AFR ratios/targets
- More Details: Click Here

Regards,
William Knose
Delicious Tuning
DeliciousTuning is offline   Reply With Quote
Old 03-10-2023, 11:07 PM   #1213
FRSBRZGT86FAN
Senior Member
 
FRSBRZGT86FAN's Avatar
 
Join Date: Jun 2013
Drives: 2023 GR SUPRA,15 FR-S (SOLD)
Location: Philadelphia, PA
Posts: 4,235
Thanks: 3,086
Thanked 2,100 Times in 1,397 Posts
Mentioned: 31 Post(s)
Tagged: 2 Thread(s)
Quote:
Originally Posted by DeliciousTuning View Post
We have some updates to our Stage 1, Stage 2, Flash & Go and All FI application tunes. The Stage 1 & Stage 2 required some small changes are to the idle control and startup conditions on speed density and some work is still in progress (below), so we will retain the same enumeration on the naturally aspirated applications. Where as the Flash & Go tunes have made quite a few changes (see list below) to our latest version which will also include, Edelbrock, Harrop, Innovate, and Jackson supercharger kits.

We seem to have found a small bug within the latest (and previous versions), while on speed density only, that in certain conditions (warm engine) on some 86's (does not affect all vehicles), the vehicle will start and die. This is something we have been reviewing with EcuTek and a few cars that have the issue. Otherwise the idle control should be a bit more stable now when running 100% Speed Density, with a lot less likely chance of receiving a high idle code as in previous versions of the tune.

Latest revisions offered by Delicious Tuning:

Stage 1 Reflash: New Version 18.50
- 100% Speed Density (any intake works)
- Stock header manifold
- Stock intake manifold 13-16 or 17-20
- Stock or aftermarket exhaust system.
- More details, click here

Stage 2 Reflash: Version 18.50
- 100% Speed Density (any intake works)
- Designed to accommodate your preferred choice of header.
- Revised intake, exhaust, timing, ignition advance, fueling, DI and PI maps
- More details, click here

Flash & Go (all forced induction applications) Version 33.50
- 100% Speed Density Enabled
- Low speed acceleration from a dead stop.
- Low speed stock throttle, with Race Throttle or higher speeds.
- Improved Direct (mid RPM range) and Port Angle injection (low speeds)
- Improved CAM Angles (better top end power)
- Better tip in response for Speed Density
- Improved off throttle burble (add-on)
- Improved Flex Fuel (Ethanol) performance output
- Improved Idle Control for more applications
- Improved Mid Throttle / Mid RPM response and AFR ratios/targets
- More Details: Click Here

Regards,
William Knose
Delicious Tuning

Any ideas or timing on when the gr86 will be supported?
__________________
*SOLD*OFT Stage 2 UEL E85/Nameless Performance 3 inch axleback with 5 inch mufflers/ TRD CAI / CNT UEL/ Cusco Strut BAR & LHD Brake Stop / "JDM" Toyota Badges / WinJet JDM headlights - DRL MOD from fteightysix.com - 5000K Diode Dynamics HID kit / Diode Dynamics LED interior Lights and sidemarker bulbs / JDM Clear Sidemarkers / Diode Dynamics LED switchbacks/ OLM LED rear turn signals / Tap Turn Relay*SOLD*
FRSBRZGT86FAN is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Delicious Tuning: Offering Innovate Supercharger Stage 1 "Tuner" EcuTeK Maps DeliciousTuning Engine, Exhaust, Bolt-Ons 24 09-20-2013 03:04 PM
Delicious Tuning: EcuTeK Stage 1 or 2 on 91, 93 or E85 fuels DeliciousTuning Engine, Exhaust, Bolt-Ons 1 09-19-2013 05:58 PM
Delicious Tuning - Dyno Tuning Weekend at Mann Engineering's (San Jose, CA) DeliciousTuning Announcements, Contests, Giveaways 6 09-19-2013 05:55 PM
Delicious Tuning: FlexFuel Innovate Supercharger EcuTeK Maps DeliciousTuning Engine, Exhaust, Bolt-Ons 1 09-13-2013 01:34 AM
Delicious Tuning and HG Motorsports: 86Fest Only Special - Take $100 off EcuTeK DeliciousTuning Announcements, Contests, Giveaways 5 08-26-2013 02:33 PM


All times are GMT -4. The time now is 06:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.