Intec Tail Lights wiring help

[Jdmjunkie]

I am hoping someone with Intecs can help me. I just recently purchased a set of Intec tail lights and they ended up not coming with the wiring harness from the back of the lights. I was wonding if someone could take some pictures or if they have a diagram showing how to wire the light into the car?

Thank you!

[Jdmjunkie]

I was able to find the connectors online and order them. Hopefully someone will have some time over the weekend to check their car.

[KentuckyTRD86]

Originally Posted by Jdmjunkie

I am hoping someone with Intecs can help me. I just recently purchased a set of Intec tail lights and they ended up not coming with the wiring harness from the back of the lights. I was wonding if someone could take some pictures or if they have a diagram showing how to wire the light into the car?

Thank you!

If you add me on Facebook I will video chat with you and show you. My name is Dennis Prow and I have those same tails. It is very easy

[StraightOuttaCanadaEh]

Took some pics of the instructions. Hope this helps.















Let me know if you need any more pics of anything? I haven't installed mine yet

[StraightOuttaCanadaEh]

[Jdmjunkie]

Originally Posted by StraightOuttaCanadaEh

Do you know what wire are going to what pins on the factory 4 pin connector?

[StraightOuttaCanadaEh]

Originally Posted by Jdmjunkie

Do you know what wire are going to what pins on the factory 4 pin connector?

No idea, sorry

[JesseG]

Originally Posted by Jdmjunkie

I am hoping someone with Intecs can help me. I just recently purchased a set of Intec tail lights and they ended up not coming with the wiring harness from the back of the lights. I was wonding if someone could take some pictures or if they have a diagram showing how to wire the light into the car?

Thank you!

If I remember correctly I had to use the connectors from an old stock set of taillights I had laying around, when I installed my JDM replica tails. So it’s probably common for some to not even include the connectors, they expect you to use the existing ones I guess.


Sent from my iPhone using Tapatalk

[soundman98]

Originally Posted by StraightOuttaCanadaEh

Let me know if you need any more pics of anything? I haven't installed mine yet

of note, this vehicles turn signal relay is a separate module. the information they give here is for cars where the turn signal relay is integral to other modules, and non-replaceable.

as such, resistors are just a good way to tempt murphies law to burn your car down.

if you experience hyperflash, change the relay with an 'led compatible' version. DO NOT install load resistors.

[HaXx]

Originally Posted by StraightOuttaCanadaEh

this is so weird to me, why does is say "for sequential function"?how are the intecs sequential??

im thinking this must be a translation error because as far as i know the intecs are 100% non sequential in terms of a turn signal that goes from left to right/vice versa, like you would see on spyder v1 tails

[sharpsicle]

Originally Posted by HaXx

this is so weird to me, why does is say "for sequential function"?how are the intecs sequential??

im thinking this must be a translation error because as far as i know the intecs are 100% non sequential in terms of a turn signal that goes from left to right/vice versa, like you would see on spyder v1 tails

They probably include this exact manual with other sets of lights, some of which may be sequential. It's a common practice to make one document that covers multiple models.