Hardrace 5x114.3 Hubs - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

pheoxs · 07-08-2013, 03:27 PM

Bump, did anyone figure out what would need to be done with the brakes?

FeaR-S · 07-08-2013, 08:24 PM

Quote:

Originally Posted by the_butcher

YES! Getting these.

How much should I expect to pay for new rotors? Do I just pick out a set of 5x114.3 discs, stick the conversion kit on it, and go? I'm seeing them priced from $50 all the way up into the hundreds of dollars. A link to something that would fit perfect would be appreciated by anyone. Still learning how all of this stuff works. Thanks!

Yes and let us know how it all goes.

JordanWho · 09-27-2013, 04:30 AM

I'm looking at these....

I just purchased a PMU BBK for 5x100 however want to know if I buy this conversion, will my existing calliper/bracket fit?

I know I'll have to change the rotor/hats to 5x114.3 but want to know if I need specific 5x114.3 calliper and bracket to suit.

Cheers.

brz_star21 · 09-27-2013, 04:48 AM

Quote:

Originally Posted by JordanWho

I'm looking at these....

I just purchased a PMU BBK for 5x100 however want to know if I buy this conversion, will my existing calliper/bracket fit?

I know I'll have to change the rotor/hats to 5x114.3 but want to know if I need specific 5x114.3 calliper and bracket to suit.

Cheers.

I highly doubt that PMU would ever make specific 5x114.3 calipers. Financially it wouldn't make sense for them to do it that way I would think. If anything, the brackets would be different. Seeing as how the STI Brembos bolt right up (save for the guys running '04-07 rears), again, I don't see why you should run into any problems. Best to try and give the vendor you bought the PMU kit a call so that they might be able to contact PMU directly and address your questions.

JordanWho · 09-27-2013, 05:11 AM

Quote:

Originally Posted by brz_star21

I highly doubt that PMU would ever make specific 5x114.3 calipers. Financially it wouldn't make sense for them to do it that way I would think. If anything, the brackets would be different. Seeing as how the STI Brembos bolt right up (save for the guys running '04-07 rears), again, I don't see why you should run into any problems. Best to try and give the vendor you bought the PMU kit a call so that they might be able to contact PMU directly and address your questions.

Cheers man.

If all I need to do is change the rotors I'll buy these for sure. The calliper and bracket cannot be exchanged so if it mounts up the same I'll be right otherwise I'm stuck with 5x100.

Will email PMU and HR on Monday. Cheers.

SLICVIC · 09-28-2013, 01:21 PM

i dont think the rear rotors swap out with any STi being that theyre slightly larger for drum brakes in the rear. could be wrong tho. possibly sti rotors in front, redrilled rotors in rear?

Is any one running these HardRace or Megan Hubs?!?!

utekineir · 09-28-2013, 01:29 PM

Rear ebrake shoes work with sti rotor on this car?

On my forester (5x100) I picked up a set of parking brake shoes with more material to make the sti rotor work

brz_star21 · 09-29-2013, 03:43 AM

Quote:

Originally Posted by SLICVIC

i dont think the rear rotors swap out with any STi being that theyre slightly larger for drum brakes in the rear. could be wrong tho. possibly sti rotors in front, redrilled rotors in rear?

Is any one running these HardRace or Megan Hubs?!?!

Just follow what the STI brake swap guys are running as a guideline. The GRB ('08+ STI) will bolt right up with the exception of trimming the dust shield. Since you're replacing the hubs, why not just remove the shield entirely?

http://www.ft86club.com/forums/showthread.php?t=23512

SLICVIC · 10-01-2013, 05:27 PM

Wow very good to know ^

im suprised a complete brake caliper/rotor compatibility write up isnt stickied on this section

Filipino Royale · 02-06-2014, 05:42 AM

any updates on this guys?

Redstar · 02-06-2014, 01:53 PM

Quote:

Originally Posted by Filipino Royale

any updates on this guys?

Quote:

Originally Posted by Redstar

Just emailed Megan the other day about these hubs, and they mentioned that they're not on the market at the moment for some reason. They didn't have a date as to when they'd be available again either.

http://www.ft86club.com/forums/showp...9&postcount=34

mnsayer · 04-02-2014, 12:35 AM

Nothing yet on this? it seems no one has done this conversion yet.

Redstar · 04-02-2014, 01:14 PM

Has nobody read my posts? lol

mnsayer · 04-03-2014, 12:18 AM

Quote:

Originally Posted by Redstar

Has nobody read my posts? lol

Hahaha it says its available on their site... Unless its a buy now and wait a couple of months type of thing

09-27-2013, 04:30 AM	#59
JordanWho Senior Member Join Date: Aug 2012 Drives: Ford Focus RS & Toyota 86 GTS Location: Australia Posts: 423 Thanks: 260 Thanked 249 Times in 119 Posts Mentioned: 12 Post(s) Tagged: 0 Thread(s)	I'm looking at these.... I just purchased a PMU BBK for 5x100 however want to know if I buy this conversion, will my existing calliper/bracket fit? I know I'll have to change the rotor/hats to 5x114.3 but want to know if I need specific 5x114.3 calliper and bracket to suit. Cheers. __________________ Build Thread Instagram @jordanwho

09-28-2013, 01:21 PM	#62
SLICVIC Senior Member Join Date: Aug 2012 Drives: 2006 STi Location: NYC Posts: 589 Thanks: 495 Thanked 444 Times in 210 Posts Mentioned: 40 Post(s) Tagged: 0 Thread(s)	i dont think the rear rotors swap out with any STi being that theyre slightly larger for drum brakes in the rear. could be wrong tho. possibly sti rotors in front, redrilled rotors in rear? Is any one running these HardRace or Megan Hubs?!?! __________________ Instagramz: VicMoralLess http://www.stancenation.com/2012/09/...ed-subaru-sti/

10-01-2013, 05:27 PM	#65
SLICVIC Senior Member Join Date: Aug 2012 Drives: 2006 STi Location: NYC Posts: 589 Thanks: 495 Thanked 444 Times in 210 Posts Mentioned: 40 Post(s) Tagged: 0 Thread(s)	Wow very good to know ^ im suprised a complete brake caliper/rotor compatibility write up isnt stickied on this section __________________ Instagramz: VicMoralLess http://www.stancenation.com/2012/09/...ed-subaru-sti/

02-06-2014, 05:42 AM	#66
Filipino Royale Got Rice? Join Date: May 2012 Drives: 37J BRZ-L Location: Empire State. Posts: 425 Thanks: 15 Thanked 27 Times in 21 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	any updates on this guys? __________________ Be a Leader, Be a Friend, Be at Service. -AɸΩ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering Wheels and Hubs	Juurian	Cosmetic Modification (Interior/Exterior/Lighting)	3	03-08-2013 09:21 PM
Any news on 5x114.3 front hubs for BRZ/FRS yet?	eikond	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	26	10-25-2012 10:10 AM
Chances of Someone Developing 5x114.3 HUBS (not spacers)?	Entropy	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	9	08-04-2012 03:35 PM
Bolt Pattern, Wheel Hubs and Studs	Jeff Lange	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	32	03-08-2012 02:49 AM
Replace stock hubs with different bolt patern ones?	ahausheer	Other Vehicles & General Automotive Discussions	12	02-07-2012 12:24 AM

07-08-2013, 03:27 PM	#57
pheoxs Hold my beer n watch this Join Date: Nov 2012 Drives: '14 Fiesta ST / '91 240sx Location: Calgary, Alberta Posts: 782 Thanks: 214 Thanked 301 Times in 177 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Bump, did anyone figure out what would need to be done with the brakes?

09-28-2013, 01:29 PM	#63
utekineir blowhard Join Date: Jun 2013 Drives: frs, project forester Location: ma Posts: 980 Thanks: 53 Thanked 604 Times in 316 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Rear ebrake shoes work with sti rotor on this car? On my forester (5x100) I picked up a set of parking brake shoes with more material to make the sti rotor work

04-02-2014, 12:35 AM	#68
mnsayer Senior Member Join Date: May 2012 Drives: LexusGS,Lotus Exige S240,LexusLX570 Location: Kuwait Posts: 116 Thanks: 129 Thanked 39 Times in 20 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Nothing yet on this? it seems no one has done this conversion yet.

04-02-2014, 01:14 PM	#69
Redstar Destroyer of Tires Join Date: Apr 2013 Drives: 2001 Honda Accord, 1997 Lexus ES300 Location: SoCal Posts: 88 Thanks: 39 Thanked 50 Times in 30 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Has nobody read my posts? lol

User Name		Remember Me?
Password