The Gen 2 Photo Thread - Page 7 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Yoshoobaroo · 11-14-2021, 07:02 PM

Quote:

Originally Posted by MyHybridBurnsGasAndTires

just undo the bolts and see if there's some play in the holes of the frame. the bumper holes are probably properly aligned.

Yes please take a look, I’m curious if it’s like the front where there’s an insert pre-installed or if it just has dimples that you run a self tapper through.

beltax90 · 11-14-2021, 07:21 PM

or just loosen one side and adjust the plate!

mazeroni · 11-14-2021, 07:31 PM

Quote:

Originally Posted by MyHybridBurnsGasAndTires

just undo the bolts and see if there's some play in the holes of the frame. the bumper holes are probably properly aligned.

I only see 1 screw on the rear plate - bottom left. That's why it is misaligned. Probably don't want the plate moving around on the paint, so get it fixed ASAP.

trippinbillies40 · 11-14-2021, 08:13 PM

Quote:

Originally Posted by Yoshoobaroo

Yes please take a look, I’m curious if it’s like the front where there’s an insert pre-installed or if it just has dimples that you run a self tapper through.

There's just dimples for drilling marks, and they're wider than US plates.

Yoshoobaroo · 11-14-2021, 08:24 PM

Quote:

Originally Posted by trippinbillies40

There's just dimples for drilling marks, and they're wider than US plates.

Oh boy. Adding that to the list of things I’m asking the dealer not to do.

Imagine being the guy who had to justify having a flat with pre-drilled holes and metal inserts on the front bumper, but at the same time decide dimples on the rear are sufficient. Like what?

Rcode · 11-15-2021, 11:32 PM

Quote:

Originally Posted by MyHybridBurnsGasAndTires

just undo the bolts and see if there's some play in the holes of the frame. the bumper holes are probably properly aligned.

Quote:

Originally Posted by Yoshoobaroo

Is the bumper not pre-drilled like the front?

I will definitely take another look but they looked drilled when I checked. The plate wasn't moving to much
though so I'm not to worried right now. It's just a little annoying.

Quote:

Originally Posted by PhatFreshPrince

Don't apologize. We are starving for anything. All pictures and videos are welcomed.

I want to see a WRB and Sapphire Blue sitting side by side in one photo, so they will be in the same light. I want to compare the two colors.

Quote:

Originally Posted by LanceLane174

I have just been taking all the WR Blue pics and showing people my new car. Lol

Don't 🛑

Well I'm glad to hear that, because I've got more! The top two are from a local Subaru dealer meet I went to with Jucostud. Note the fender vents on his car.

Jucostud · 11-15-2021, 11:52 PM

Speaking of fender vents...

ProGodLegend · 11-16-2021, 12:10 AM

Quote:

Originally Posted by Jucostud

Speaking of fender vents...

Nice, I have the fender garnish too but haven't installed it yet. Was it easy? I'm assuming you just clean and stick it on.

Sent from my Pixel 6 using Tapatalk

Jucostud · 11-16-2021, 12:18 AM

Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

22 BRZ · 11-16-2021, 08:41 AM

Quote:

Originally Posted by Jucostud

Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

What part is that? A vinyl or something else?

euroshowoff · 11-16-2021, 10:02 AM

hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder.

Jucostud · 11-16-2021, 11:48 AM

Quote:

Originally Posted by euroshowoff

hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder.

I don't have any issues

Jucostud · 11-16-2021, 11:50 AM

Quote:

Originally Posted by 22 BRZ

What part is that? A vinyl or something else?

here's a closer look for ya

groovymoonbear · 11-16-2021, 12:40 PM

Quote:

Originally Posted by Jucostud

here's a closer look for ya

How was the shipping experience? Take a while?

11-15-2021, 11:52 PM	#91
Jucostud Rookie Join Date: Oct 2021 Drives: '22 BRZ Premium MT6 Location: DFW Posts: 151 Thanks: 200 Thanked 156 Times in 55 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Speaking of fender vents... Attached Images

11-16-2021, 10:02 AM	#95
euroshowoff Senior Member Join Date: Apr 2013 Drives: 2015 Tacoma Location: VA Posts: 157 Thanks: 19 Thanked 32 Times in 27 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder. __________________ "Bah Weep Granah Weep Nini Bong" Old: 2013 Arengto FR-S Current: 2015 Tacoma/2020 Sequoia Pro Future: 2022 CWP Limited Est Delivery 06/22

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Track Day Photo Thread	Dougboy	CANADA	36	06-06-2016 04:49 PM
Photo shop request thread	cjsporl1996	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	8	12-16-2013 04:32 PM
Most recent photo's of your BRZ / 86 /FR-S Thread	omgwtfbbqsauce	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	48	01-11-2013 03:42 PM
Invasion toNeptunes Net Photo thread	FRS_13	Southern California	5	12-17-2012 07:00 PM

11-14-2021, 07:21 PM	#86
beltax90 Senior Member Join Date: Jan 2019 Drives: 2010 corolla Location: california Posts: 1,404 Thanks: 1,520 Thanked 1,798 Times in 780 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	or just loosen one side and adjust the plate!

11-16-2021, 12:18 AM	#93
Jucostud Rookie Join Date: Oct 2021 Drives: '22 BRZ Premium MT6 Location: DFW Posts: 151 Thanks: 200 Thanked 156 Times in 55 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

User Name		Remember Me?
Password