Random Thoughts - Part Deux [NO POLITICS]

[soundman98]

I knew i was forgetting something!

[mancini]

Originally Posted by cjd

Bad planetary alignments do weird things... Or so they say.
Easiest way I know is wait... It'll move on its own.

Agreed..But we need to be self-responsible to make it faster..Isn't it?

[Captain Snooze]

From Japanese 物の哀れ (mono no aware)

Mono no aware (物の哀れ), literally "the pathos of things", and also translated as "an empathy toward things", or "a sensitivity to ephemera", is a Japanese term for the awareness of impermanence (無常, mujō), or transience of things, and both a transient gentle sadness (or wistfulness) at their passing as well as a longer, deeper gentle sadness about this state being the reality of life. "Mono-no aware: the ephemeral nature of beauty – the quietly elated, bittersweet feeling of having been witness to the dazzling circus of life – knowing that none of it can last. It’s basically about being both saddened and appreciative of transience – and also about the relationship between life and death. In Japan, there are four very distinct seasons, and you really become aware of life and mortality and transience. You become aware of how significant those moments are.

Wikipedia

[NoHaveMSG]

Originally Posted by Tcoat

I don't mean screwing up a good part I mean making a "bad" one on purpose. You know better than anybody that products are built to a customers specs. Bad specs mean bad parts. You can have bad speced forged and good speced cast. It is all in what they ask for.

Yeah, now that you say that. I could imagine someone asking for a forged wheel and getting it back super brittle. Then the manufacturer saying "you didn't say you wanted it normalized and heat treated too."

Production started complaining about a bunch of poor fitting brackets. Our drawing locates the bracket, but it doesn't say to weld it at 90 degrees from the flange on the end. So they are all over the place

And I got the metallurgical analysis back on the resistor wire from my oven. The manufacturer swears N7 is the correct grade. The new element wire was N7. The old one that lasted 2 years and still worked, N8

[Will BRZ]

Originally Posted by ichitaka05

Im at this point, I’ve emailed some chinese wheel maker that’s certified in DOT, JWL & other stuff who can make custom forged wheels for $400 per wheel. lol see how that goes lol

My front bumper have paint crack... which can be fixed w repaint, but sadly driver side corner tab is broken. Do it doesn’t fully stay. Well it can, but not secure

Custom forged wheels for $400 a piece doesn’t sound bad

[ichitaka05]

Originally Posted by Will BRZ

Custom forged wheels for $400 a piece doesn’t sound bad

Yeah it doesn't, cuz Forge wheels aren't cheap at all... But again, just figuring out all the options. Buying or not is all up in the air.

[NoHaveMSG]

Bit the bullet. Ordered a GTC200. Figured I can build a splitter.

[Tcoat]

Originally Posted by NoHaveMSG

Bit the bullet. Ordered a GTC200. Figured I can build a splitter.

[Sapphireho]

Originally Posted by NoHaveMSG

Bit the bullet. Ordered a GTC200. Figured I can build a splitter.

I'm sorry

[NoHaveMSG]

Originally Posted by Tcoat

Ordered a wing for the car.

[Sapphireho]

Gas under $2 now. I can't remember last time I saw that.

[NoHaveMSG]

Originally Posted by Sapphireho

I'm sorry

I bought this one in particular because of the way it mounts. It has mounting pads that mount to the trunk lid and the uprights bolt to the mounting pads. That way I can remove it for street driving and not look like a total douche all of the time. Just some of the time

[Sapphireho]

Originally Posted by NoHaveMSG

Ordered a wing for the car.

I think he knew that.

[ichitaka05]

Originally Posted by Sapphireho

Gas under $2 now. I can't remember last time I saw that.

Cuz no one is driving, so they're trying to get much. Result stock is going down, trying to do much as they can to get it going... but prob won't happen.