DIY 2014 Navigation unit **FULLY working 6/19** Pandora/Weather/Traffic/ETC... - Page 19 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

jdubious · 06-12-2014, 10:18 PM

I got the PT591-00140 brackets that holds the module to the radio but my 2013 brackets don't seem quite right. Are there some different ones I can order from the dealership? I haven't seen a part number thrown around

Also, is nav and aha the only thing Bespoke does? IDK why I was expecting more cool shit

P@ul · 06-14-2014, 06:45 PM

Quote:

Originally Posted by STV3

Edit: Scratch that... Started to drive and it kicked in and works perfect now lol

So I got the upgraded radio from a friend and I purchased the GPS antenna in the link on the first post and it did not fit properly. I shaved down the plastic a little so it would slide in because the connecter on the inside looks the same and it fit in fine but the GPS isn't working. Any ideas? Did they change the antenna since you bought from that link?

Hahaha, same thing happened to me!

iniguez310 · 07-10-2014, 12:28 AM

Quote:

Originally Posted by jdubious

I got the PT591-00140 brackets that holds the module to the radio but my 2013 brackets don't seem quite right. Are there some different ones I can order from the dealership? I haven't seen a part number thrown around

Also, is nav and aha the only thing Bespoke does? IDK why I was expecting more cool shit

I know what you mean, I just installed the head unit in my 2013 earlier today and couldn't find a way to fit the brackets in perfectly. Just wondering if you found a way to install them or did you get different ones??

jdubious · 07-10-2014, 08:46 AM

I pulled my radio back out and fiddled with it some. At least now the radio doesn't look crooked anymore.

I plan to swing by the dealership to ask about the 2014 brackets but have spent the last couple of weeks messing around with my truck. I might swing by on my lunch break today and check it out.

iniguez310 · 07-10-2014, 06:36 PM

Quote:

Originally Posted by jdubious

I pulled my radio back out and fiddled with it some. At least now the radio doesn't look crooked anymore.

I plan to swing by the dealership to ask about the 2014 brackets but have spent the last couple of weeks messing around with my truck. I might swing by on my lunch break today and check it out.

I'm wondering if it has something to do with the brackets that hold the navigation module to the head unit itself. I don't have the navigation module though. The radio doesn't look crooked on mine just I had to kinda "force" the cover on it.

jdubious · 07-10-2014, 06:56 PM

Here are the part numbers they gave me.

SU003-01962
SU003-01963

They list for $6.81 ea. Our local warehouse doesn't stock them so it looks like it will be late into next week before I get mine. The pic he showed me looked kind of weird and I'm not 100% sure if these are the only parts needed.

iniguez310 · 07-10-2014, 07:12 PM

Quote:

Originally Posted by jdubious

Here are the part numbers they gave me.

SU003-01962
SU003-01963

They list for $6.81 ea. Our local warehouse doesn't stock them so it looks like it will be late into next week before I get mine. The pic he showed me looked kind of weird and I'm not 100% sure if these are the only parts needed.

I think they are correct. The bolt holes look closer together like how they look on the headunit itself. Gonna get myself the pair. If I get them before you I'll try to post some pics

iniguez310 · 07-17-2014, 12:02 PM

Quote:

Originally Posted by jdubious

Here are the part numbers they gave me.

SU003-01962
SU003-01963

They list for $6.81 ea. Our local warehouse doesn't stock them so it looks like it will be late into next week before I get mine. The pic he showed me looked kind of weird and I'm not 100% sure if these are the only parts needed.

They are the same ones man. We were just installing them wrong.

jdubious · 07-17-2014, 09:58 PM

They never called me to let me know the brackets came in. After looking at your pic I pulled my radio out and removed the (other)brackets that hold the nav module to the radio. I also drilled some holes at the bottom to try to better secure the nav module.

The red arrow is about the only place to put one. The green arrow hole has some threads behind it but it will put the head of the bolt too close to the bracket. There is also some double sided tape between the radio and module so it should be all good.

iniguez310 · 07-18-2014, 09:10 PM

I'll give that a try when I get my nav module in next week. Thanks!

86 FRS · 07-23-2014, 04:32 PM

where'd u guys install the GPS antenna?

post_break · 07-23-2014, 05:00 PM

If anyone needs the brackets or GPS antenna I have both. Just pay shipping plus $5. I bought extras by mistake.

disfrs · 07-27-2014, 04:29 PM

I have a 2014 FRS with the factory radio and I bought a BeSpoke head unit on eBay. I installed the unit and it works - partially - the touch screen in non responsive. When I entered setup I could not access any features and the only thing that I can do is use the search or scan function to pick up a radio station. Have I missed something on the install ? There is a message that say "BeSpoke Premium Audio not installed - see dealer for details ," Any clues you have would be greatly appreciated.

Chop Shop · 08-06-2014, 10:37 AM

Got mine set up last night, works good, this may be a stupid question but I can't figure it out. Is there anyway to end a trip on the GPS? Every Time I get in my car, it just gives me directions to my last destination and I haven't found a way to just end the entire process.

07-10-2014, 08:46 AM	#256
jdubious Member Join Date: May 2013 Drives: 13 Scion FR-S Location: Texas Posts: 89 Thanks: 44 Thanked 20 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I pulled my radio back out and fiddled with it some. At least now the radio doesn't look crooked anymore. I plan to swing by the dealership to ask about the 2014 brackets but have spent the last couple of weeks messing around with my truck. I might swing by on my lunch break today and check it out. Last edited by jdubious; 07-10-2014 at 09:11 AM.

07-27-2014, 04:29 PM	#265
disfrs Junior Member Join Date: Jun 2012 Drives: 2013 Scion FR-s - white - manual Location: Weatherford, Texas Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	question I have a 2014 FRS with the factory radio and I bought a BeSpoke head unit on eBay. I installed the unit and it works - partially - the touch screen in non responsive. When I entered setup I could not access any features and the only thing that I can do is use the search or scan function to pick up a radio station. Have I missed something on the install ? There is a message that say "BeSpoke Premium Audio not installed - see dealer for details ," Any clues you have would be greatly appreciated. Last edited by disfrs; 07-27-2014 at 04:30 PM. Reason: no email posted

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Scion Standard Radio for 2014	NedVargar	Electronics \| Audio \| NAV \| Infotainment	45	06-13-2013 09:00 PM
WTB: Pioneer Premium Audio radio/head unit	tech4pdx	Canada Classifieds	2	04-14-2013 07:31 PM
Sirus Radio on Stock head Unit	wtout86	Electronics \| Audio \| NAV \| Infotainment	3	11-20-2012 02:22 PM
Fitting the radio plug into aftermarket head unit	GC GTS Aero Kit	Electronics \| Audio \| NAV \| Infotainment	1	10-29-2012 05:41 AM
head unit in GTA	excited86	Electronics \| Audio \| NAV \| Infotainment	1	06-18-2012 07:42 PM

06-12-2014, 10:18 PM	#253
jdubious Member Join Date: May 2013 Drives: 13 Scion FR-S Location: Texas Posts: 89 Thanks: 44 Thanked 20 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I got the PT591-00140 brackets that holds the module to the radio but my 2013 brackets don't seem quite right. Are there some different ones I can order from the dealership? I haven't seen a part number thrown around Also, is nav and aha the only thing Bespoke does? IDK why I was expecting more cool shit

07-10-2014, 06:56 PM	#258
jdubious Member Join Date: May 2013 Drives: 13 Scion FR-S Location: Texas Posts: 89 Thanks: 44 Thanked 20 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here are the part numbers they gave me. SU003-01962 SU003-01963 They list for $6.81 ea. Our local warehouse doesn't stock them so it looks like it will be late into next week before I get mine. The pic he showed me looked kind of weird and I'm not 100% sure if these are the only parts needed.

07-17-2014, 09:58 PM	#261
jdubious Member Join Date: May 2013 Drives: 13 Scion FR-S Location: Texas Posts: 89 Thanks: 44 Thanked 20 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	They never called me to let me know the brackets came in. After looking at your pic I pulled my radio out and removed the (other)brackets that hold the nav module to the radio. I also drilled some holes at the bottom to try to better secure the nav module. The red arrow is about the only place to put one. The green arrow hole has some threads behind it but it will put the head of the bolt too close to the bracket. There is also some double sided tape between the radio and module so it should be all good.

07-18-2014, 09:10 PM	#262
iniguez310 Cool Guy Join Date: Aug 2013 Drives: 2013 Scion FR-S Location: Los Angeles Posts: 44 Thanks: 23 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'll give that a try when I get my nav module in next week. Thanks!

08-06-2014, 10:37 AM	#266
Chop Shop Member Join Date: Jul 2014 Drives: Future FR-S Location: Massachusetts Posts: 42 Thanks: 6 Thanked 1 Time in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Got mine set up last night, works good, this may be a stupid question but I can't figure it out. Is there anyway to end a trip on the GPS? Every Time I get in my car, it just gives me directions to my last destination and I haven't found a way to just end the entire process.

User Name		Remember Me?
Password