hub centric ring help - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Elliotw · 04-02-2018, 11:50 PM

So I picked up some hub centric rings for my TC105N

56.1mm to 73.1mm They dont seem to fit quite right. But I've never installed hub centric rings. I feel like the rings should go into the wheel more then this:

Top down photo:

What do you guys think?

Brzerker · 04-03-2018, 01:06 AM

Some hub centric rings are a tight fit, making sure it stays on. You could use a mallet and tap it slightly until it sits flush in the bore.

I've had some which are a loose fit which falls off as soon as u take the wheels off.

Spuds · 04-03-2018, 01:10 AM

Quote:

Originally Posted by Elliotw

So I picked up some hub centric rings for my TC105N

56.1mm to 73.1mm They dont seem to fit quite right. But I've never installed hub centric rings. I feel like the rings should go into the wheel more then this:

Top down photo:

What do you guys think?

Well, if the backside of the wheel does not contact the rotor when installed, then it's not going to work.

Google came up with this among other things.
[ame]https://m.youtube.com/watch?v=j0fWPPNaeM8[/ame]

Also, it might be the picture but that flange looks a bit too big for the countersink.

Apoc · 04-03-2018, 08:48 AM

The problem is that you have the wrong size hubcentric ring. TC105N in 5x100 have a inner diameter of 65mm. Try rings with 56.1x65
http://nebula.wsimg.com/e9d732f621d5...&alloworigin=1

SCQTT · 04-03-2018, 09:56 AM

What if you need to go the other way? Can the center bore be accurately increased? My winter wheel/tire set up for my 2015 Corolla has a 54.1 center bore, so close to fitting on my 86 with a 56.1 mm bore.

Apoc · 04-03-2018, 11:01 AM

Quote:

Originally Posted by SCQTT

What if you need to go the other way? Can the center bore be accurately increased? My winter wheel/tire set up for my 2015 Corolla has a 54.1 center bore, so close to fitting on my 86 with a 56.1 mm bore.

It isn't a matter of accuracy it may weaken the wheel.

SCQTT · 04-03-2018, 11:25 AM

Quote:

Originally Posted by Apoc

It isn't a matter of accuracy it may weaken the wheel.

Yeah, I could see that. I guess I just need to buy another setup or put the car away for winter. This was my first winter with the 86 and I didn't drive it.

Elliotw · 04-03-2018, 01:25 PM

Quote:

Originally Posted by Apoc

The problem is that you have the wrong size hubcentric ring. TC105N in 5x100 have a inner diameter of 65mm. Try rings with 56.1x65
http://nebula.wsimg.com/e9d732f621d5...&alloworigin=1

This must be the problem. I will order the correct set.

04-02-2018, 11:50 PM	#1
Elliotw Senior Member Join Date: Sep 2017 Drives: '18 BRZ tS, '18 GTI SE, '11 RS Location: Seattle Posts: 505 Thanks: 232 Thanked 392 Times in 224 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	hub centric ring help So I picked up some hub centric rings for my TC105N 56.1mm to 73.1mm They dont seem to fit quite right. But I've never installed hub centric rings. I feel like the rings should go into the wheel more then this: Top down photo: What do you guys think?

04-03-2018, 01:06 AM	#2
Brzerker Senior Member Join Date: Jan 2015 Drives: World Rally Blue BRZ Location: Singapore Posts: 150 Thanks: 24 Thanked 39 Times in 25 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	Some hub centric rings are a tight fit, making sure it stays on. You could use a mallet and tap it slightly until it sits flush in the bore. I've had some which are a loose fit which falls off as soon as u take the wheels off. __________________

04-03-2018, 08:48 AM	#4
Apoc Senior Member Join Date: Jul 2012 Drives: Raven FR-S 6M Location: Calgary, Canada Posts: 638 Thanks: 348 Thanked 375 Times in 232 Posts Mentioned: 3 Post(s) Tagged: 1 Thread(s)	The problem is that you have the wrong size hubcentric ring. TC105N in 5x100 have a inner diameter of 65mm. Try rings with 56.1x65 http://nebula.wsimg.com/e9d732f621d5...&alloworigin=1 __________________ “The World is Flat” [\|\|•]=(86)=[•\|\|]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hub centric Ring for 57c6	ikarntspel	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	10-16-2016 08:08 PM
Missing Hub-Centric Ring	Apex_BRZ	Tracking / Autocross / HPDE / Drifting	7	04-28-2015 01:40 AM
Do I need hub centric ring	07jazzrs5gt86	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	23	09-20-2014 02:56 AM
Is 1mm worth a hub centric ring?	swift996	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	02-28-2013 03:00 PM
Size of Centric Hub Ring wheel?	Akired86	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	10-07-2012 11:19 PM

04-03-2018, 09:56 AM	#5
SCQTT ZWEI KOLBEN Join Date: Feb 2017 Drives: 2017 86 Halo 6MT Location: Mikes Sky Rancho Posts: 245 Thanks: 106 Thanked 163 Times in 88 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	What if you need to go the other way? Can the center bore be accurately increased? My winter wheel/tire set up for my 2015 Corolla has a 54.1 center bore, so close to fitting on my 86 with a 56.1 mm bore.

User Name		Remember Me?
Password