|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
10-03-2020, 10:39 PM | #1 |
Senior Member
Join Date: Jul 2013
Drives: '10 S4/'13 BRZ/'16 GT4/E30 M3
Location: Markham
Posts: 329
Thanks: 9
Thanked 127 Times in 92 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Raceseng spring perch hitting underside of strut tower
Have the Raceseng CasCam - Caster + Camber Plates on our BRZ for the last four years and everything was fine until I moved the car after it was sitting for a few weeks (prior to that it was at the track). Rest of the suspension is stock.
In the short drive there is a very loud metallic bang coming from the top of the right front suspension whenever the right tire went over any uneven pavement. Doing quick aggressive left-right to load up the suspension does not duplicate the issue. Looked underneath, can clearly see that the spring perch is making contact to the underside of the strut tower. Any thoughts on what failed or what else I can check?
__________________
Mike
|
10-04-2020, 12:30 AM | #2 |
-
Join Date: Nov 2012
Drives: '13 FRS - STX
Location: SF Bay Area
Posts: 10,365
Thanks: 13,733
Thanked 9,479 Times in 4,998 Posts
Mentioned: 94 Post(s)
Tagged: 3 Thread(s)
|
That's not the strut tower, that's the camber plate. I had a similar issue, probably solved by a small spacer between the spring perch and the conical lower thingy and then moving your lower spring perch the same amount to compensate.
Or eventually it will create enough clearance on its own. imho this is a very small issue and I bet if you contact raceseng they could provide a simple spacer or updated spring perch adapter thingy for a very modest fee. Edit, make sure all bolts are tight |
10-04-2020, 01:02 AM | #3 |
Senior Member
Join Date: Jul 2013
Drives: '10 S4/'13 BRZ/'16 GT4/E30 M3
Location: Markham
Posts: 329
Thanks: 9
Thanked 127 Times in 92 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Yes you're right, camber plate, not sure why I thought that was the strut tower. Plan on checking all the bolts tomorrow.
__________________
Mike
|
10-09-2020, 08:04 PM | #4 |
Senior Member
Join Date: Jun 2016
Drives: 2016 BRZ
Location: NJ
Posts: 362
Thanks: 53
Thanked 160 Times in 105 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
|
You might have an older release.
They released a bushing that spaced it correctly. I've had the original and the updated bushings. Contact them directly and they will know what you need. Edit, I forgot I had a picture....the bottom one in the attached picture is what you need. |
The Following User Says Thank You to Joon525 For This Useful Post: | strat61caster (10-14-2020) |
10-14-2020, 11:47 AM | #5 |
Senior Member
Join Date: Jul 2013
Drives: '10 S4/'13 BRZ/'16 GT4/E30 M3
Location: Markham
Posts: 329
Thanks: 9
Thanked 127 Times in 92 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Thanks, did reach out to them and they are sending me the revised ones.
Great customer service from Raceseng!
__________________
Mike
|
The Following User Says Thank You to tanner For This Useful Post: | strat61caster (10-14-2020) |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Strut spring perch clearance | ayau | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 07-12-2018 09:34 PM |
Raceseng CasCam - Caster + Camber Plates with Spring Perch | RJasonKlein | Brakes, Suspension, Chassis | 3 | 01-26-2017 07:14 PM |
FS (NY): Bilstein B16 (PSS 10) + Raceseng camber plates + Raceseng B16 spring perch | dp1 | Brakes, Suspension, Chassis | 7 | 05-01-2016 10:28 PM |
FS PA Raceseng factory strut tower brace | subaruferrucci | Brakes, Suspension, Chassis | 5 | 10-14-2014 09:43 PM |
Raceseng | Introducing STIFF ARM | New Strut Tower Bars | Raceseng | Brakes, Suspension, Chassis | 1 | 10-28-2013 09:54 PM |