follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Speed By Design
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > DIY (Do-It-Yourself) Guides

DIY (Do-It-Yourself) Guides For all DIYs.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 02-14-2015, 10:39 AM   #1
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Smile DIY - Oil pressure sender and gauge (Auberins)

This is my job to install a smart gauge for oil pressure, very accurate and small. Wide alarm functions. Buzzer fitting too (opt).

Box it's a 1/32 DIN 22x45 mm and it fits very well inside "Push button start" box. You need to cut inner back . I mounted and fixed it with two plastic screws coming from two little clips (hot soldered).


About sender, you need unplug the cap near air intake throttle. You need a big torque as it is white loctite plugged.








Included wiring in combo is 3 ft (1 mt) and you need reach 2.50/2.60 mt . Max cable length admitted is 3 mt (9 ft)

From Auberins you need:
www.auberins.com/index.php?main_pag...products_id=226

http://www.auberins.com/index.php?ma...roducts_id=226

SYL1813 A (A is amber)
10 Bar (150 PSI) pressure sender P210
The combo includes sender, wiring and gauge, $89,95

To install the sender you need an adapter : M18x1,5 - 1/8 27 NPT


Some shoots







Inside the SYL1813A (make holes for air vent)








Follow included Auberins directions to setup (Bar or PSI) and for removing SYL1813 box for soldering it with plastic nuts.
__________________

Last edited by Trap63; 02-14-2015 at 11:03 AM.
Trap63 is offline   Reply With Quote
The Following 8 Users Say Thank You to Trap63 For This Useful Post:
afx (02-16-2015), chaoskaze (11-01-2017), GhostOp86 (05-02-2015), Guillaume (02-17-2015), Joesurf79 (11-19-2017), jrhudson (09-03-2021), MJones_RB (09-03-2021), ripper (02-17-2015)
Old 02-17-2015, 07:39 AM   #2
Guillaume
Senior Member
 
Guillaume's Avatar
 
Join Date: Jul 2012
Drives: Exige S 240
Location: Belgium
Posts: 732
Thanks: 319
Thanked 602 Times in 287 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Neat setup, I will follow that route if I decide to get an oil pressure gauge! Thanks for sharing.
__________________
Guillaume is offline   Reply With Quote
The Following User Says Thank You to Guillaume For This Useful Post:
Trap63 (02-17-2015)
Old 02-17-2015, 09:56 AM   #3
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by Guillaume View Post
Neat setup, I will follow that route if I decide to get an oil pressure gauge! Thanks for sharing.
In conjunction with Torque Pro on Android HU or HKS OB link you can see all parameters you need while racing. Auberins SYL1813 can send a signal to open or close adding fan for oilcooler, too. Very impressive and amazing for maintaining a stock look of internal design. I hate all "tuning" gauges....mostly in the wrong place.
__________________
Trap63 is offline   Reply With Quote
The Following User Says Thank You to Trap63 For This Useful Post:
Guillaume (02-17-2015)
Old 05-01-2015, 07:19 PM   #4
Max FRS
Member
 
Join Date: Aug 2014
Drives: 2015 Halo FRS Automatic
Location: Georgia
Posts: 74
Thanks: 0
Thanked 22 Times in 16 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Garage
Where did you get the adapters to install the sensor?


Max
Max FRS is offline   Reply With Quote
Old 05-02-2015, 04:34 AM   #5
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by Max FRS View Post
Where did you get the adapters to install the sensor?


Max
I bought on Ebay, UK.

http://www.ebay.it/itm/LMA-Racing-Mo...item46195c308d
__________________
Trap63 is offline   Reply With Quote
The Following User Says Thank You to Trap63 For This Useful Post:
Guillaume (05-02-2015)
Old 05-02-2015, 08:06 PM   #6
Max FRS
Member
 
Join Date: Aug 2014
Drives: 2015 Halo FRS Automatic
Location: Georgia
Posts: 74
Thanks: 0
Thanked 22 Times in 16 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Garage
Thanks, just ordered one.


Max
Max FRS is offline   Reply With Quote
Old 05-05-2015, 08:56 AM   #7
FrX
Senior Member
 
Join Date: May 2012
Drives: 2013 Scion FR-S, 1993 Lexus SC300
Location: Houston, TX
Posts: 411
Thanks: 284
Thanked 175 Times in 102 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Garage
You can get the adapter at FastWRX too: http://www.fastwrx.com/products/oil-gallery-plug
FrX is offline   Reply With Quote
The Following User Says Thank You to FrX For This Useful Post:
Trap63 (11-20-2017)
Old 08-03-2015, 11:44 AM   #8
pleong
Senior Member
 
Join Date: Nov 2012
Drives: 2013 Whiteout FR-S
Location: Texas
Posts: 815
Thanks: 163
Thanked 273 Times in 146 Posts
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
is there an alternative place to put the sensor? I was wanting to use this spot for an oil accumulator.
__________________

TEAM NEMESIS | NEM 86 | IG: @NEM_86
PTE5858 Turbo | Integrated Engineering Fuel Surge Tank | 1300cc Injectors | Exedy Twin Disc | RAYS Volk ZE40 | 295/30/18 | 522whp @ 6,600 Dyno Dynamics
The NEM86 Build Thread
pleong is offline   Reply With Quote
Old 08-19-2021, 05:23 PM   #9
fatboydean
Member
 
Join Date: Apr 2020
Drives: 2016 BRZ Hikari
Location: British Columbia
Posts: 78
Thanks: 30
Thanked 16 Times in 14 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
which LED color you chose? Red or Amber? I saw on the pic the 'red' box is checked...
fatboydean is offline   Reply With Quote
Old 08-21-2021, 08:16 AM   #10
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by fatboydean View Post
which LED color you chose? Red or Amber? I saw on the pic the 'red' box is checked...
amber
__________________
Trap63 is offline   Reply With Quote
Old 08-22-2021, 02:35 PM   #11
fatboydean
Member
 
Join Date: Apr 2020
Drives: 2016 BRZ Hikari
Location: British Columbia
Posts: 78
Thanks: 30
Thanked 16 Times in 14 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
thanks for the reply, I wonder how you deal with the wire lenth? just cut in the middle and add extension cords?
fatboydean is offline   Reply With Quote
Old 08-22-2021, 02:39 PM   #12
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by fatboydean View Post
thanks for the reply, I wonder how you deal with the wire lenth? just cut in the middle and add extension cords?
you need an extension wire about 40 cm, no signal degradation is evaluable, respect wire section and solder it. Preferably to join not in engine bay.
__________________
Trap63 is offline   Reply With Quote
The Following User Says Thank You to Trap63 For This Useful Post:
fatboydean (08-23-2021)
Old 09-02-2021, 11:55 PM   #13
fatboydean
Member
 
Join Date: Apr 2020
Drives: 2016 BRZ Hikari
Location: British Columbia
Posts: 78
Thanks: 30
Thanked 16 Times in 14 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
one more question, you do need to have 12V supply for this unit in addition to the 3 sensor wires right?
fatboydean is offline   Reply With Quote
Old 09-03-2021, 12:20 AM   #14
Trap63
Senior Member
 
Trap63's Avatar
 
Join Date: Apr 2013
Drives: Brz WRB - Europe LHD
Location: TURIN - Piedmont - ITALY
Posts: 921
Thanks: 1,163
Thanked 834 Times in 288 Posts
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by fatboydean View Post
one more question, you do need to have 12V supply for this unit in addition to the 3 sensor wires right?
yes, it is. ACC+ is the solution.
__________________
Trap63 is offline   Reply With Quote
The Following User Says Thank You to Trap63 For This Useful Post:
jrhudson (09-03-2021)
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
oil pressure gauge onemorelap Engine, Exhaust, Transmission 69 03-04-2023 05:46 PM
Defi Oil Pressure Gauge and Cravenspeed Flexpod Gauge Mount Install and Review Tye300 Cosmetic Modification (Interior/Exterior/Lighting) 10 05-22-2015 12:48 PM
Oil Pressure Observations - Anyone else using a gauge? Dave-ROR Engine, Exhaust, Transmission 29 01-20-2014 12:56 AM
Have a tire pressure gauge you really like? Anthony Tracking / Autocross / HPDE / Drifting 21 09-10-2013 06:09 PM
Oil Pressure Sender Unit Fitment Question Captain Snooze Engine, Exhaust, Transmission 2 07-06-2013 12:41 AM


All times are GMT -4. The time now is 07:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.