T7019A Android 2.3 Unpacking - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Trap63 · 06-05-2013, 12:36 PM

Here is the HU from Tradesolutions.hk A lot of harness, right identified with labels for connecting to car HU harness.
So, I read about trouble about 12+ for amplified car antenna. Which pin/cable must I solder/connect? ...and for rear camera voltage?

charged86 · 06-05-2013, 12:46 PM

Keep us updated

2forme · 06-05-2013, 12:46 PM

I would try P.CNTR for your antenna first.

Trap63 · 06-05-2013, 12:48 PM

Quote:

Originally Posted by 2forme

I would try P.CNTR for your antenna first.

I suppose means "Power Control"....isn'it?

2forme · 06-05-2013, 12:53 PM

Yup, also used for amp turn on.

Trap63 · 06-05-2013, 01:57 PM

uhm I'll wire it to my antenna. CAN labeled wires which functions may manage? any ideas?

Inviato da mio iPhone usando Tapatalk

Orisai · 06-09-2013, 01:27 AM

Quote:

Originally Posted by Trap63

uhm I'll wire it to my antenna. CAN labeled wires which functions may manage? any ideas?

Inviato da mio iPhone usando Tapatalk

I believe they're used to connect a SWC interface such as the PAC-SWI or Metra's ASWC.

nzer · 06-09-2013, 01:51 AM

Have fun @Trap63. I'm loving mine.

Tobz · 06-09-2013, 06:59 AM

Sorry please ignore my post - got the answers

Sent from my HTC_PN071 using Tapatalk 2

Pacific · 06-09-2013, 07:08 AM

I'm also studying mine before to mount in the car.
Regarding the antenna, the power for the booster is the pin 8 in the 10 pins connector.
According to SVXcd post http://www.ft86club.com/forums/showt...booster+wiring, this original connection is perfect for the BRZ and it is not necessary to use the antenna adaptor blue wire . For the FR-S, the adaptor blue wire have to be connected to this pin, assume the best solution is to remove the pin from the connector and join the 2 wires. For the Toyota, I'm not sure that the car is equipped with an antenna booster. I Will try without any connection and if results are bad I will connect like the FR-S.
The wire P.CNTR appears to be for the subwoofer amp. thus it could be connected in the pin 9 of 10 pins connector for BRZ and FR-S as Toyota have not subwoofer amp. except with JBL option.
Regarding the rear camera, the brown wire have to be pluged in pin2 on 28 pins connector. This give 12v when rear gear is engaged and order the HU to switch the video on the CAMERRA plug. For the power of the camera I'm studying a simple electronic switch which will allow the camera to be powered during a determined time (say 45s) when the ACC is switched on. This will permit to the HU to recognize that a camera is plugged during booting and the camera is not powered permanently. When the rear gear is engaged, the camera is powered on and will remain active around 4s after the gear have been disengaged. In fact I add this delay to have the time to check the correct position of the car I noted that I was often far from my garage wall ......;-)
In fact this electronic system is similar to the connection in pin 7 of 16 pins connector which avoid a permanent power of the camera. The connection to the rear lights remains also possible but I do not know whether the HU recognize the presence of the camera during booting.
I'm waiting the USB hub and ELM327 bluetooth to pursue the install.

Trap63 · 06-09-2013, 03:28 PM

Quote:

Originally Posted by nzer

Have fun @Trap63. I'm loving mine.

! very very fine! I try to install it wiring to cigars plug to verify and for root access....all is gone well...and I download TomTom for Android. No trouble! Great!! Great HU!

dlux · 06-10-2013, 01:42 PM

I'm very interested in this HU. Would love to see a short review! Does this HU go by any other name other than T7019A?

coyote · 06-11-2013, 02:41 AM

Quote:

Originally Posted by 2forme

Yup, also used for amp turn on.

Just be aware that it powers your amp down and then up every time the reverse camera is triggered.

I think it may have also done so after every call. Can't remember.

2forme · 06-11-2013, 07:02 AM

Quote:

Originally Posted by coyote

Just be aware that it powers your amp down and then up every time the reverse camera is triggered.

I think it may have also done so after every call. Can't remember.

I don't have a reverse camera, but I can guarantee it doesn't shut down after every call.

06-05-2013, 12:36 PM	#1
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 921 Thanks: 1,163 Thanked 834 Times in 288 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	T7019A Android 2.3 Unpacking Here is the HU from Tradesolutions.hk A lot of harness, right identified with labels for connecting to car HU harness. So, I read about trouble about 12+ for amplified car antenna. Which pin/cable must I solder/connect? ...and for rear camera voltage? __________________

06-05-2013, 12:46 PM	#2
charged86 Senior Member Join Date: Mar 2013 Drives: whiteout gt86 2015 IS350fsport Location: northern kentucky. cincy Posts: 1,931 Thanks: 2,154 Thanked 697 Times in 437 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	Keep us updated __________________ INSTAGRAM @Rcf_700 www.youtube.com/boostindub

06-05-2013, 01:57 PM	#6
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 921 Thanks: 1,163 Thanked 834 Times in 288 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	uhm I'll wire it to my antenna. CAN labeled wires which functions may manage? any ideas? Inviato da mio iPhone usando Tapatalk __________________

06-09-2013, 01:51 AM	#8
nzer Senior Member Join Date: Jun 2012 Drives: 2012 Grey TRD GT86, 2015 VW Golf R Location: Wellington, New Zealand Posts: 1,572 Thanks: 666 Thanked 942 Times in 540 Posts Mentioned: 62 Post(s) Tagged: 0 Thread(s)	Have fun @Trap63. I'm loving mine. __________________ My fully loaded TRD86 http://www.ft86club.com/forums/showt...760#post582760

06-09-2013, 06:59 AM	#9
Tobz Member Join Date: Jul 2012 Drives: Toyota 86 GTS Location: Canberra, Australia Posts: 73 Thanks: 11 Thanked 14 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sorry please ignore my post - got the answers Sent from my HTC_PN071 using Tapatalk 2 Last edited by Tobz; 06-09-2013 at 09:29 AM.

06-09-2013, 07:08 AM	#10
Pacific Member Join Date: Jun 2012 Drives: 5 Celica since 1978.Now a GT86 Location: France - South Posts: 52 Thanks: 140 Thanked 21 Times in 15 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I'm also studying mine before to mount in the car. Regarding the antenna, the power for the booster is the pin 8 in the 10 pins connector. According to SVXcd post http://www.ft86club.com/forums/showt...booster+wiring, this original connection is perfect for the BRZ and it is not necessary to use the antenna adaptor blue wire . For the FR-S, the adaptor blue wire have to be connected to this pin, assume the best solution is to remove the pin from the connector and join the 2 wires. For the Toyota, I'm not sure that the car is equipped with an antenna booster. I Will try without any connection and if results are bad I will connect like the FR-S. The wire P.CNTR appears to be for the subwoofer amp. thus it could be connected in the pin 9 of 10 pins connector for BRZ and FR-S as Toyota have not subwoofer amp. except with JBL option. Regarding the rear camera, the brown wire have to be pluged in pin2 on 28 pins connector. This give 12v when rear gear is engaged and order the HU to switch the video on the CAMERRA plug. For the power of the camera I'm studying a simple electronic switch which will allow the camera to be powered during a determined time (say 45s) when the ACC is switched on. This will permit to the HU to recognize that a camera is plugged during booting and the camera is not powered permanently. When the rear gear is engaged, the camera is powered on and will remain active around 4s after the gear have been disengaged. In fact I add this delay to have the time to check the correct position of the car I noted that I was often far from my garage wall ......;-) In fact this electronic system is similar to the connection in pin 7 of 16 pins connector which avoid a permanent power of the camera. The connection to the rear lights remains also possible but I do not know whether the HU recognize the presence of the camera during booting. I'm waiting the USB hub and ELM327 bluetooth to pursue the install. Last edited by Pacific; 02-21-2014 at 09:45 AM.

06-10-2013, 01:42 PM	#12
dlux Member Join Date: Sep 2012 Drives: BRZ Location: Los Angeles Posts: 76 Thanks: 3 Thanked 2 Times in 2 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm very interested in this HU. Would love to see a short review! Does this HU go by any other name other than T7019A?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD door stabilizer unpacking...	Trap63	Cosmetic Modification (Interior/Exterior/Lighting)	3	10-09-2015 08:01 PM
Ok, where are the Android geeks?	luscious	Electronics \| Audio \| NAV \| Infotainment	51	05-20-2013 09:47 PM
Toyota genuine LH Armrest unpacking	Trap63	Cosmetic Modification (Interior/Exterior/Lighting)	4	05-12-2013 05:08 AM
Torque for Android	Freeman	Scion FR-S / Toyota 86 GT86 General Forum	7	11-22-2012 11:05 PM
Android vs iOS vs BB os...which is best?	Raiden	Off-Topic Lounge [WARNING: NO POLITICS]	19	02-02-2011 10:37 PM

User Name		Remember Me?
Password