![]() |
#1051 |
meow
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 32,309
Thanks: 52,878
Thanked 37,115 Times in 19,250 Posts
Mentioned: 1114 Post(s)
Tagged: 9 Thread(s)
|
*le sigh* I tried to help.
Damn lucky. Tactrix Badger don't care.
__________________
|
![]() |
![]() |
![]() |
#1052 |
Member
Join Date: Oct 2021
Drives: 15 FRS
Location: US
Posts: 48
Thanks: 2
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#1053 |
Member
Join Date: Oct 2021
Drives: 15 FRS
Location: US
Posts: 48
Thanks: 2
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Bro it freaked me in the heck out because when I went to start it it was having all sorts of issues. Like all my lights were on and my gauge is weren't working it was just not driving right it was being completely weird. And it wouldn't read the ROM all the way or anything Then I turned it off and just restarted it and then it was working fine and turns of the car running but still wasn't flashing. I just sat there kept turning the ignition on and off and kept on trying to program it eventually it went into program mode and I just saved the ROM. Then third time when I went to write the ROM I sat there and just squeezed the two connectors together and it went right into programming mode so that is why I believe it's a connection issue
|
![]() |
![]() |
The Following User Says Thank You to 15WhiteFRS For This Useful Post: | EAGLE5 (02-17-2022) |
![]() |
#1054 |
has a funny hat
Join Date: Feb 2020
Drives: 2014 BRZ Limited
Location: MI
Posts: 493
Thanks: 1,105
Thanked 626 Times in 278 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Is there a way to tell the Tactrix to start a new log file after X entries or at a specified file size?
|
![]() |
![]() |
![]() |
#1055 |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,988 Times in 2,982 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
|
![]() |
![]() |
![]() |
#1056 |
Junior Member
Join Date: Aug 2022
Drives: 2020 86 6AT
Location: Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I have a 2020 86 with 6AT calid ZA1JV01D. Does anyone have romraider and ecuflash def for this calid?
If not, is there a compatible rom that I can use? Thanks in advance |
![]() |
![]() |
![]() |
#1057 |
Senior Member
Join Date: Aug 2022
Drives: WRB BRZ
Location: Australia
Posts: 114
Thanks: 14
Thanked 51 Times in 36 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#1058 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,235
Thanks: 506
Thanked 1,098 Times in 794 Posts
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
|
Welcome back buddy
|
![]() |
![]() |
![]() |
#1059 |
Member
Join Date: Oct 2022
Drives: 2017 BRZ
Location: EU
Posts: 14
Thanks: 0
Thanked 3 Times in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
A few noob questions:
I have a 2017 (MY2018) USDM MT BRZ. I got a Tactrix OpenPort 2.0, and as a first step I would like to flash the OFT Stage 1 map (car is stock). I've been reading for a couple weeks now, but the knowledge is very fragmented, so I still have some doubts: - there are newer stock ROMs available, for MY 2018, 19, 20... are they an update over the 2017 ROM? - stock ROM is ZA1JK00C. OFT tune seems to have "hacked CalID", meaning that the .bin file mentions ZA1JK00C twice, but also once has the ZA1JK00G, on which it is based on. Is it safe to flash that ROM to my car without any modifications? - the first post says that ZA1JK00G is the "old logic" ROM - are there features lost because of that (compared to edited ZA1JK00C)? Last edited by GTwice; 12-25-2022 at 12:02 PM. |
![]() |
![]() |
![]() |
#1060 | |
Senior Member
Join Date: Aug 2022
Drives: WRB BRZ
Location: Australia
Posts: 114
Thanks: 14
Thanked 51 Times in 36 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Quote:
For a 2018 manual just use K00G tunes and definitions that's the base rom no hacks |
|
![]() |
![]() |
![]() |
#1061 |
Junior Member
Join Date: Feb 2023
Drives: 2020 GT 86
Location: AU
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
What about for the ID ZA1JN00W? I used the ZA1JK01I definitions and its not correct. The rom is from a Aussie GT86 2020 AT. So ZA1JK01I rom and definitions match but not when I use a N00W rom with K01I Defnitions. Are you saying I should just flash the ZA1JK01I Rom and tune from there? Thanks in advance ![]() |
![]() |
![]() |
![]() |
#1062 | |
Senior Member
Join Date: Aug 2022
Drives: WRB BRZ
Location: Australia
Posts: 114
Thanks: 14
Thanked 51 Times in 36 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
![]() |
![]() |
![]() |
#1063 |
Member
Join Date: Nov 2021
Drives: 2019 Subaru BRZ
Location: NA
Posts: 64
Thanks: 31
Thanked 39 Times in 22 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Original ROMs for ZA1JS20G and ZA1JU01A00G
Hi, in my ECU research I've collected a bunch of stock ROMs, and I have two that aren't on the forum yet, S20G and U01A. Both are manual shift, red intake, and non-US.
ZA1JS20G says it's "AL7 H4NA - EU - 6MT - 2018" at 0x8000, "BSW_12CYH4N_DI_MC5 Ver 1.00r1" at 0x8100, ecuid 0xBF61707007 at 0x12947b. ZA1JU01A00G says it's "AK8 H4 - DOM - MT - H - 2018" at 0x8000, "BSW_12CYH4N_DI_MC5 Ver 1.00r1" at 0x8100, ecuid 0xC901703107 at 0x125924. These are both interesting to me because they have EU/JP MC5-series logic, rather than the US MC4-series logic in the US roms. I've been digging into VVT and there's considerable differences in how intake/exhaust timing are calculated, along with total rewrites of the base/normal/safe tables.
Last edited by callisto; 04-01-2023 at 11:15 PM. |
![]() |
![]() |
The Following User Says Thank You to callisto For This Useful Post: | AussieBRZ (04-03-2023) |
![]() |
#1064 |
Member
Join Date: Nov 2021
Drives: 2019 Subaru BRZ
Location: NA
Posts: 64
Thanks: 31
Thanked 39 Times in 22 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
As a footnote, I applied U01A to my 2019 US and it’s really nice so far
![]() |
![]() |
![]() |
|
|
![]() |
Tags |
ecuflash, tactrix, taxtrix, tuning |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
ECUFlash - Getting close! | xjohnx | Software Tuning | 698 | 03-22-2015 01:10 PM |
EcuTek Flash finished but now it shows only a Partial Flash... | Cross | Software Tuning | 32 | 02-12-2014 11:55 AM |
Tactrix Openport | jamesm | Engine, Exhaust, Bolt-Ons | 1 | 01-28-2014 09:27 PM |
Visconti Tuning - Latest BRZ Flash Info | Visconti | Software Tuning | 6530 | 12-24-2013 11:18 PM |
Overboost Protection With OFT/EcuFlash? | FrX | Software Tuning | 9 | 10-23-2013 08:27 AM |