|
Software Tuning Discuss all software tuning topics. |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#15 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,235
Thanks: 506
Thanked 1,098 Times in 794 Posts
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
|
nothing, just meant that you could try more retarded timing on base timing B
|
![]() |
![]() |
![]() |
#16 | |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
with a hysteresis of 50rpm limiter still holds the limiter at 7600, zero bounces with a 50 hysteresis with a -0.12 retard (as provided from oft) you hear a small pop once you hit limiter only and it sluggishly bounces without popping (that one small pop is present when the car is fully stock, but the stock hysteresis is like 300 so the bounce is kinda slow. Am thinking about 3 options: 1. advance some timing on 7600 2. same timing but bigger hysteresis than 50rpm only 3. same setup and same values for the last 2 base timing B rows ( -17 timing retardation at 7450 and 7600 ) with a hysteresis of 50 |
|
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,235
Thanks: 506
Thanked 1,098 Times in 794 Posts
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
|
try bigger hysteresis also for fuel cut, 50 is very small and intended in fact to let rpm stay almost holding
|
![]() |
![]() |
![]() |
#18 |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: Jan 2017
Drives: brz 2017 hksv2
Location: italy
Posts: 2,235
Thanks: 506
Thanked 1,098 Times in 794 Posts
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
|
i m not used to this feature in openflash/romraider, only ecutek sorry
|
![]() |
![]() |
![]() |
#20 |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
![]() |
![]() |
![]() |
#21 | |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,988 Times in 2,982 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Quote:
There in No ignition cut possible even in ecutek its all fuel cut, to do ignition cut you would need additional hardware box like bee R rev limiter |
|
![]() |
![]() |
![]() |
#22 |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,988 Times in 2,982 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
|
![]() |
![]() |
![]() |
#23 | |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
update on the tune ( got a bit busy recently that's why it's a late reply ) so the limiter still holds at 7600 with a hysteresis of 100rpm and approx -17 of timing at 7600 in the base timing B the rpm needle isn't even moving i think i remember it used to sluggishly jump a bit with the default oft v4 stage2+ tune with a hysteresis of 50rpm and -0.12 timing at 7600rpm and i think i was able to hear a one cut as soon as it hits 7600 ( similar to the stock tune cut but without dropping 300 rpm ) so i was wondering what would advancing some timing at 7600 above zero do to the limiter. |
|
![]() |
![]() |
![]() |
#24 | |
Senior Member
Join Date: Jan 2013
Drives: Toyota 86
Location: South Korea
Posts: 276
Thanks: 136
Thanked 216 Times in 123 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
|
|
![]() |
![]() |
![]() |
#25 | |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
my car is banging on 0.15 load with -15 ignition timing retard my goal is to have a fast rev limiter ( similar to the rev limiter in neutral or to that guy in the video i linked in a previous post, will link it in this one as well ) it currently holds at 7600 with -16.29 on last row and a 100rpm hysteresis start at 2:15 |
|
![]() |
![]() |
![]() |
#26 |
Member
Join Date: Mar 2021
Drives: 13' Scion FR-S 10 Series
Location: Lebanon
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I was talking to a guy with an NA brz on instagram, the shop tuned his car using ecutek achieving the same "popcorn" rev limiter like the boosted 86 in the youtube video linked above but at 6500 instead of rev limiting above 7000 (for safety as he mentioned)
So I think it doesn't have anything to do with being boosted instagram post link below ( #6 in the album, onboard video ) https://www.instagram.com/p/CgTIwAzL..._web_copy_link |
![]() |
![]() |
|
|
![]() |
Tags |
ecuflash, pops and bangs, rev limit, romraider, tactrix |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rev limiter not working | Qwimby1 | Engine, Exhaust, Transmission | 15 | 07-27-2021 12:19 AM |
How do I get an ECU rev limiter like this? | Tor | Software Tuning | 44 | 03-21-2017 11:17 PM |
Where Do You Set Your Rev Limiter? | Chad86 | Scion FR-S / Toyota 86 GT86 General Forum | 38 | 06-10-2014 05:48 AM |
Rev limiter? | feldy | Scion FR-S / Toyota 86 GT86 General Forum | 4 | 06-03-2012 11:47 PM |
<3 my rev limiter | NESW20 | Other Vehicles & General Automotive Discussions | 1 | 05-03-2010 12:05 AM |