SOLD Shaftworks 1-way Coilovers

[RedReplicant]

Selling a set of Shaftworks Bilanx Competition 1way coilovers, I had them rebuilt by Shaftworks / Jon this month - shock dyno sheets included - and have not run them since.

Visually they are not the best looking things, but they get covered up by the boots anyway.

I was competitive on the spring rates as-is at 22.5" front and rear from bottom of a 17" wheel to fender lip, Perrin 22mm front bar, and a stock rear bar. Car was on the looser side of things, so you can either run them as-is or bump up to like 8k front if you want something more neutral, I was advised not to drop rear rate to keep them off the bumpstops.

Spring rates are Swift 6k front / 11k rear
Includes:
* Used set of Toyota 12mm bolts for top of struts
* Used set of SPC camber bolts for bottom of struts
* New set of SPC camber bolts for bottom of struts
* Torrington bearings for front springs
* Karcepts rear shock mounts
* Two spare shock bearings
* Spare shock bearing to mount piece
* Shaftworks shock boots
* Adjustment wrenches

These are $2700 new and I just had a $450 rebuild service done on them.

Price is $----sold shipped anywhere in the US.
Can be picked up in Phoenix, Az any time, [s]at High Plains Raceway August 10-13[/s], or at Chuckwalla in September.

[RedReplicant]

Price drop, let's go.

[RedReplicant]

Sold