projekt zeal86 (build thread) - Page 82 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

zeal86 · 05-04-2018, 05:56 PM

Quote:

Originally Posted by laextreme5

Excited to see the rear wheel/tire setup. Same size i plan to eventually run. Keep up the good work. Coming from the repair industry im impressed with your level of detail and workmanship. Keep it up.

Thanks for noticing my work... this is actually my first time doing any body work...I really enjoy it.

My front fitment was based off the fitment of the Aimgain SN type 2 demo 86...
http://www.stancenation.com/2017/03/...86-subaru-brz/
My rear fitment was based off the following builds...
FR 18X12, 0 285/35 R 18X13, 0 335/30
https://www.instagram.com/lian_nast/

FR 18X12.5, +5 295/30 R 18X13, -1 315/30
https://www.instagram.com/joshtification/

IG @zeal.eightsix

Clipdat · 05-04-2018, 06:00 PM

Congrats on your Toyo sponsorship. Any idea what model tire they're going to provide?

zeal86 · 05-04-2018, 06:02 PM

I went with 18X11, +2 Front and 18x13, -1 for my wheels. Because the highest disk (R) available for Work Wheels may not clear my front Runduce brakes according to Work... I may have to use a 3mm hubcentric spacers... which would bring my effective offset to -1 on the front.

IG @zeal.eightsix

zeal86 · 05-04-2018, 06:03 PM

Quote:

Originally Posted by Clipdat

Congrats on your Toyo sponsorship. Any idea what model tire they're going to provide?

R888r is what I'll ask for...

IG @zeal.eightsix

Clipdat · 05-04-2018, 06:09 PM

lol! attaboy!

Quote:

Originally Posted by zeal86

R888r is what I'll ask for...

IG @zeal.eightsix

Ashikabi · 05-04-2018, 06:27 PM

Quote:

Originally Posted by zeal86

I went with 18X11, +2 Front and 18x13, -1 for my wheels. Because the highest disk (R) available for Work Wheels may not clear my front Runduce brakes according to Work... I may have to use a 3mm hubcentric spacers... which would bring my effective offset to -1 on the front.

IG @zeal.eightsix

What's your camber

zeal86 · 05-04-2018, 06:38 PM

Quote:

Originally Posted by Ashikabi

What's your camber

Don't expect to add too much camber... just enough though. I want meat on my tires and I'm not about stance so that will determine how my fitment will look.

IG @zeal.eightsix

Ashikabi · 05-04-2018, 06:55 PM

Quote:

Originally Posted by zeal86

Don't expect to add too much camber... just enough though. I want meat on my tires and I'm not about stance so that will determine how my fitment will look.

IG @zeal.eightsix

Indeed. Just trying to gauge what wheel sizes I'll need in 8 years when I can afford this project

zeal86 · 05-04-2018, 07:07 PM

By the way... Ordered my wheels through @Kami Speed.

I don't believe they sell many Work Wheels since they are not an authorized dealer but they definitely gave me as good a price on my wheels as I would have received from an authorized dealer... actually it was better. As always... Kamispeed is a pleasure to do business with! Please check them out next time you are mod hunting!

They are an authorized SSR dealer though... Keep that in mind when it comes to wheel buying time for y'all! SSRs were my second choice... can't go wrong with either brand!

IG @zeal.eightsix

Clipdat · 05-04-2018, 07:49 PM

But they aren't an authorized dealer! You might end up getting Rotas instead in the mail! lol

Quote:

Originally Posted by zeal86

By the way... Ordered my wheels through @Kami Speed.

I don't believe they sell many Work Wheels since they are not an authorized dealer but they definitely gave me as good a price on my wheels as I would have received from an authorized dealer... actually it was better. As always... Kamispeed is a pleasure to do business with! Please check them out next time you are mod hunting!

They are an authorized SSR dealer though... Keep that in mind when it comes to wheel buying time for y'all! SSRs were my second choice... can't go wrong with either brand!

IG @zeal.eightsix

zeal86 · 05-04-2018, 07:54 PM

Quote:

Originally Posted by Clipdat

But they aren't an authorized dealer! You might end up getting Rotas instead in the mail! lol

Definitely not... one of the best online performance shops around... also a brick and mortar store. Authorized dealers don't always give the best prices... for example... Bulletproof Automotive falls under that category...

IG @zeal.eightsix

Clipdat · 05-04-2018, 07:58 PM

Yep, I was just messing around. I've not ever purchased anything from Kami Speed, but I've emailed/PMed with them before and they've been absolutely professional and helpful.

Quote:

Originally Posted by zeal86

Definitely not... one of the best online performance shops around... also a brick and mortar store. Authorized dealers don't always give the best prices... for example... Bulletproof Automotive falls under that category...

IG @zeal.eightsix

zeal86 · 05-06-2018, 06:46 PM

More progress...

Filled in channel on passenger side skirt... I still need to bondo and sand.

Layed down some base and pearl coats...

Bracket for gas door prime, base, and pearl coated.

I'm almost ready to clear the parts...

IG @zeal.eightsix

Clipdat · 05-08-2018, 10:56 PM

I randomly met another BRZ owner today and I told him to come on the forum and look up your zeal86 build thread. He's going widebody soon and looking for wheel fitment ideas, and I mentioned that you are in the process of going wide as well. Hope he sees this!

05-04-2018, 06:02 PM	#1137
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	I went with 18X11, +2 Front and 18x13, -1 for my wheels. Because the highest disk (R) available for Work Wheels may not clear my front Runduce brakes according to Work... I may have to use a 3mm hubcentric spacers... which would bring my effective offset to -1 on the front. IG @zeal.eightsix Last edited by zeal86; 05-04-2018 at 06:25 PM.

05-06-2018, 06:46 PM	#1147
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	More progress... Filled in channel on passenger side skirt... I still need to bondo and sand. Layed down some base and pearl coats... Bracket for gas door prime, base, and pearl coated. I'm almost ready to clear the parts... IG @zeal.eightsix Last edited by ichitaka05; 05-14-2018 at 12:37 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner STX Build Whiteout FRS Build Thread	Hachi86Roku	Tracking / Autocross / HPDE / Drifting	21	03-31-2020 07:52 PM
PC Build Thread	WingsofWar	Off-Topic Lounge [WARNING: NO POLITICS]	126	01-22-2017 09:59 PM
Kylefrs Build Thread	kylefrs	Member's Car Journals	14	01-28-2015 08:27 PM
Jac's BRZ build thread	Jac	Member's Car Journals	0	04-30-2014 07:09 PM
EOJ (Not much of a Build) Thread	jonbatz01	Member's Car Journals	41	07-31-2013 07:34 PM

05-04-2018, 07:07 PM	#1143
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	By the way... Ordered my wheels through @Kami Speed. I don't believe they sell many Work Wheels since they are not an authorized dealer but they definitely gave me as good a price on my wheels as I would have received from an authorized dealer... actually it was better. As always... Kamispeed is a pleasure to do business with! Please check them out next time you are mod hunting! They are an authorized SSR dealer though... Keep that in mind when it comes to wheel buying time for y'all! SSRs were my second choice... can't go wrong with either brand! IG @zeal.eightsix

User Name		Remember Me?
Password